Skip to contentSkip to conversation

Degraded Array event on /dev/md1:thelma

DISCUSSION Robert Steinmetz AIA 1 participant 1 message Apr 23, 2015 MD RAID

lore
Share & tools
lore
#0 lore raw

I have a small Ubuntu 14.04 LTS server with two Type 1 arrays, primarily for redundancy. Recently I started getting email with the above title.

I checked the array and one drive had failed. I replaced the drive, ran fdisk to create a new Linux Raid Array partition (type fd) of exactly the same size as the existing disk. Then using gnome-disk-utility added the new drive to the array. Apparently that added the entire disk, not the partition I created however, everything seems to be working properly.

BUT I am still regularly getting the email below indicating a problem with /dev/md1, even though I think I fixed the problem.

Quoted 9 lines

This is an automatically generated mail message from mdadm running on thelma

A DegradedArray event had been detected on md device /dev/md1.

Faithfully yours, etc.

P.S. The /proc/mdstat file currently contains the following:

Quoted 8 lines

Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md1 : active raid1 sdc1[0]

       312567552 blocks [2/1] [U_]

md0 : active raid1 sda1[0] sdb1[1]

       78148096 blocks [2/2] [UU]

unused devices: <none>

However mdadm reports:

Quoted 19 lines
root@thelma:~# mdadm --detail /dev/md1
/dev/md1:
        Version : 0.90
  Creation Time : Sun Mar 11 19:06:41 2007
     Raid Level : raid1
     Array Size : 312567552 (298.09 GiB 320.07 GB)
  Used Dev Size : 312567552 (298.09 GiB 320.07 GB)
  Raid Devices : 2
  Total Devices : 2
Preferred Minor : 1
    Persistence : Superblock is persistent

Update Time : Thu Apr 23 12:36:16 2015
State : clean
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0

Quoted 6 lines

UUID : a5865e80:27a899df:bfaac05b:eff3fc62
Events : 0.16313034

Number Major Minor RaidDevice State
0 8 33 0 active sync /dev/sdc1
1 8 48 1 active sync /dev/sdd

mdadm.conf contains the following:

Quoted 7 lines
root@thelma:/etc/mdadm# cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md1 : active raid1 sdc1[0] sdd[1]
      312567552 blocks [2/2] [UU]

md0 : active raid1 sda1[0] sdb1[1]

      78148096 blocks [2/2] [UU]

cat /proc/mdstat produces.

Quoted 10 lines
root@thelma:/etc/mdadm# cat /proc/mdstat

Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md1 : active raid1 sdc1[0] sdd[1]

      312567552 blocks [2/2] [UU]

md0 : active raid1 sda1[0] sdb1[1]

      78148096 blocks [2/2] [UU]

unused devices: <none>

I'm not sure whether there is a real problem or how to fix it. It seems some inaccurate configuration information is stored somewhere.