media: cx88-mpeg: clear interrupt status register before streaming video
Subsystems (2)
PATCH v2 1/1 media: cx88-mpeg: clear interrupt status register before streaming video
Some cx88 video cards may have transport stream status interrupts set to 1 from cold start, causing errors like this:
cx88xx: cx88_print_irqbits: core:irq mpeg [0x100000] ts_err?*
cx8802: cx8802_mpeg_irq: mpeg:general errors: 0x00100000
According to CX2388x datasheet, the interrupt status register should be cleared before enabling IRQs to stream video.
Fix it by clearing the Transport Stream Interrupt Status register.
Signed-off-by Daniel González Cabanelas <[email protected]>
---
Changes in v2:
- Added bits 8 and 12 to the clear operation. Now all documented MO_TS_INTSTAT bits are cleared.
drivers/media/pci/cx88/cx88-mpeg.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/media/pci/cx88/cx88-mpeg.c +3 -0
@@ -162,6 +162,9 @@ int cx8802_start_dma(struct cx8802_dev *dev,cx_write (MO_TS_GPCNTRL ,GP_COUNT_CONTROL_RESET ); q->count =0 ; +/* clear interrupt status register */ +cx_write (MO_TS_INTSTAT ,0x1f1111 ); +/* enable irqs */ dprintk (1 ,"setting the interrupt mask\n" );cx_set (MO_PCI_INTMSK , core->pci_irqmask |PCI_INT_TSINT );
Signature · 1 line
2.35.1