Skip to contentSkip to conversation

Question about passing the right TARGET_CC and TARGET_LD to .c and .cpp Makefile in same project

Buildroot Nils Köhler 2 participants 2 messages May 2, 2015

lore
Share & tools
lore
#0 lore raw

Hello,

I have a problem to compile .c and .cpp sources together in one project. For .c files everything is fine. but with .cpp i run into problems. It compiles witout any error, but will not run on target.
The executeble itselv is present, but linked against host. I can run the executeble on the host but not on the target.

I have googeled a lot but actually i found no way to solve the problem.

I monitored two problems to build my .cpp executebles of a project named connect:

1. Problem
For a multi input file .cpp application the host g++ is used,
instead of the TARGET_CC, it seems that TARGET_CC is not passed correctly into the makefile see below [1. Problem]

2. Problem
In case of linking the parts together LD="" Libary path is emty
see below [2. Problem]

The pure .c program the project is compiling fine with right lib
and gcc, it also runs on the target.

[Cmmented part output of a make run]

[1. Problem]
g++ -Wall -Wextra -m32 -g -rdynamic -pedantic -Wshadow -fbounds-check -fstack-protector-all -c -o util.o util.cpp
g++ -Wall -Wextra -m32 -g -rdynamic -pedantic -Wshadow -fbounds-check -fstack-protector-all -c -o tally.o tally.cpp
g++ -Wall -Wextra -m32 -g -rdynamic -pedantic -Wshadow -fbounds-check -fstack-protector-all -o tally tally.o util.o

[2. Problem]
# /usr/bin/make -j2
CXX"/home/koehler/s/br/buildroot/output/host/usr/bin/i586-buildroot-linux-uclibc-g++" LD="" -C /home/koehler/s/br/buildroot/out
put/build/connect-1.0 tally

[Normal .c program in same project compiles fine and run on target too]
# /usr/bin/make -j2
CC="/home/koehler/s/br/buildroot/output/host/usr/bin/i586-buildroot-linux-uclibc-gcc" LD="/home/koehler/s/br/buildroot/output/h ost/usr/bin/i586-buildroot-linux-uclibc-ld" -C /home/koehler/s/br/buildroot/output/build/connect-1.0 gpi_mon

Does anyone have an idear for me how to solve this issue?

Regards

NIls

----------------------------------------------------------------------------------
Here are the part of the buildroot makefile I use:

connect.mk for CONNECT Package:

define CONNECT_BUILD_CMDS

     $(MAKE) CC="$(TARGET_CC)" LD="$(TARGET_LD)" -C $(@D) all
     $(MAKE) -C $(LINUX_DIR) $(LINUX_MAKE_FLAGS) M=$(@D) modules_install

endef

define CONNECT_INSTALL_TARGET_CMDS

     $(INSTALL) -D -m 0755 $(@D)/tally $(TARGET_DIR)/bin/tally
     $(INSTALL) -D -m 0755 $(@D)/gpi_mon $(TARGET_DIR)/bin/gpi_mon

endef

define CONNECT_DEVICES

     /dev/debug  c  666  0  0  42  0  -  -  -

endef

$(eval $(generic-package))

------------------------------------------------------------------------------------

And the Makefile for my sourcecode:

# source makefile
ccflags-y+=-DUSE_PLATFORM_DEVICE
ccflags-y+=-Wall -rdynamic -Wshadow -fbounds-check

# Executebles and objects
EXEC = gpi_mon tally
OBJS = tally.o util.o

#dependencies CPP program
tally: tally.o util.o
tally.o: defines.h tally.h tally.cpp
util.o: defines.h tally.h util.cpp

#dependencies C program
gpi_mon.o: defines.h gpi_mon.c

KERNELDIR ?= /home/koehler/s/br/buildroot/output/build/linux-$(BR2_LINUX_KERNEL_VERSION)

all: modules program

modules:

     $(MAKE) -C $(KERNELDIR) M=$$PWD modules

modules_install:

     $(MAKE) -C $(KERNELDIR) M=$$PWD modules_install

program: $(EXEC)

     $(CC) $(LDFLAGS) -o $@ $(OBJS) $(LDLIBS)

clean:

     rm -rf *.o *~ core .depend .*.cmd *.ko *.mod.c .tmp_versions 

modules.order Module.symvers dio *.tmp tally gpi_mon

----------------------------------------------------------------------------------------------------
I use buildroot actual git rep last pull:
koehler at koehler-laptop-ubuntu-final:~/s/br/buildroot$ git log commit 94856075660dab56249fbe3452b34e489c2a79c5

Author: Peter Korsgaard <[email protected]>
Date:   Mon Apr 27 00:10:53 2015 +0200

Linux Kernel 3.18.12

Signature · 12 lines
-------------------------------------------------

IBT Interfaces
inh. Nils K?hler
Im Taubhaus 19
63322 R?dermark

Tel. +49-6074-6964-160
Tel. +49-6074-6964-161
Email: nils.koehler at ibt-interfaces.de

Ust-IdNr:DE813155747
#1 lore raw
Quoted 8 lines · Nils K?hler

Hello,

I have a problem to compile .c and .cpp sources together in one project. For .c files everything is fine. but with .cpp i run into problems. It compiles witout any error, but will not run on target.
The executeble itselv is present, but linked against host. I can run the executeble on the host but not on the target.

Quoted 8 lines

I have googeled a lot but actually i found no way to solve the problem.

I monitored two problems to build my .cpp executebles of a project named connect:

1. Problem
For a multi input file .cpp application the host g++ is used, instead of
the TARGET_CC, it seems that TARGET_CC is not passed correctly into the makefile see below [1. Problem]

The c++ compiler is TARGET_CXX, not TARGET_CC. So you should also add
CXX=$(TARGET_CXX) in your package.mk file. Or better yet, use $(TARGET_CONFIGURE_OPTS) which contains everything.

Quoted 25 lines

2. Problem
In case of linking the parts together LD="" Libary path is emty see
below [2. Problem]

The pure .c program the project is compiling fine with right lib and gcc, it
also runs on the target.

[Cmmented part output of a make run]

[1. Problem]
g++ -Wall -Wextra -m32 -g -rdynamic -pedantic -Wshadow -fbounds-check -fstack-protector-all -c -o util.o util.cpp
g++ -Wall -Wextra -m32 -g -rdynamic -pedantic -Wshadow -fbounds-check -fstack-protector-all -c -o tally.o tally.cpp
g++ -Wall -Wextra -m32 -g -rdynamic -pedantic -Wshadow -fbounds-check -fstack-protector-all -o tally tally.o util.o

[2. Problem]
# /usr/bin/make -j2
CXX"/home/koehler/s/br/buildroot/output/host/usr/bin/i586-buildroot-linux-uclibc-g++" LD="" -C /home/koehler/s/br/buildroot/out
put/build/connect-1.0 tally

Quoted 6 lines

[Normal .c program in same project compiles fine and run on target too]
# /usr/bin/make -j2
CC="/home/koehler/s/br/buildroot/output/host/usr/bin/i586-buildroot-linux-uclibc-gcc" LD="/home/koehler/s/br/buildroot/output/h ost/usr/bin/i586-buildroot-linux-uclibc-ld" -C /home/koehler/s/br/buildroot/output/build/connect-1.0 gpi_mon

This output is completely inconsistent with the files you show below: there is
no CXX anywhere below, there is no 'tally' or 'gpi_mon' target being called. If you ask questions, please try to be as accurate as possible.

Quoted 9 lines

Does anyone have an idear for me how to solve this issue?

Regards

NIls

Quoted 7 lines

----------------------------------------------------------------------------------
Here are the part of the buildroot makefile I use:

connect.mk for CONNECT Package:

define CONNECT_BUILD_CMDS

    $(MAKE) CC="$(TARGET_CC)" LD="$(TARGET_LD)" -C $(@D) all

Replace with

	$(TARGET_MAKE_ENV) $(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(@D) \
		tally gpi_mon

(TARGET_MAKE_ENV adds the host utilities to $PATH - not really needed in your case, but good practice).

The all target will attempt to build the modules but without
$(LINUX_MAKE_FLAGS), that's bound to give you trouble.

Quoted 1 line
    $(MAKE) -C $(LINUX_DIR) $(LINUX_MAKE_FLAGS) M=$(@D) modules_install

This should be in the INSTALL_CMDS; here you should put the same line but with
modules instead of modules_install

Quoted 39 lines

endef

define CONNECT_INSTALL_TARGET_CMDS

    $(INSTALL) -D -m 0755 $(@D)/tally $(TARGET_DIR)/bin/tally
    $(INSTALL) -D -m 0755 $(@D)/gpi_mon $(TARGET_DIR)/bin/gpi_mon

endef

define CONNECT_DEVICES

    /dev/debug  c  666  0  0  42  0  -  -  -

endef

$(eval $(generic-package))

------------------------------------------------------------------------------------

And the Makefile for my sourcecode:

# source makefile
ccflags-y+=-DUSE_PLATFORM_DEVICE
ccflags-y+=-Wall -rdynamic -Wshadow -fbounds-check

# Executebles and objects
EXEC = gpi_mon tally
OBJS = tally.o util.o

#dependencies CPP program
tally: tally.o util.o
tally.o: defines.h tally.h tally.cpp
util.o: defines.h tally.h util.cpp

#dependencies C program
gpi_mon.o: defines.h gpi_mon.c

KERNELDIR ?= /home/koehler/s/br/buildroot/output/build/linux-$(BR2_LINUX_KERNEL_VERSION)

all: modules program

Quoted 8 lines

modules:

    $(MAKE) -C $(KERNELDIR) M=$$PWD modules

modules_install:

    $(MAKE) -C $(KERNELDIR) M=$$PWD modules_install

program: $(EXEC)

    $(CC) $(LDFLAGS) -o $@ $(OBJS) $(LDLIBS)

You're using the C compiler here to link together the C++ object files, does
that work? And you're not even building gpi_mon when doing 'make all'...

Regards,
Arnout

Quoted 17 lines

clean:
rm -rf *.o *~ core .depend .*.cmd *.ko *.mod.c .tmp_versions modules.order
Module.symvers dio *.tmp tally gpi_mon

----------------------------------------------------------------------------------------------------

I use buildroot actual git rep last pull:
koehler at koehler-laptop-ubuntu-final:~/s/br/buildroot$ git log commit 94856075660dab56249fbe3452b34e489c2a79c5

Author: Peter Korsgaard <[email protected]>
Date:   Mon Apr 27 00:10:53 2015 +0200

Linux Kernel 3.18.12

Signature · 6 lines
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F