Skip to contentSkip to conversation

No sound from Mac Pro headphone port

DISCUSSION Todd Dailey 2 participants 15 messages May 8, 2015 – Jun 19, 2015 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

https://bugtrack.alsa-project.org/alsa-bug does not work so following instructions to post bug here.

Linux 4. Mac Pro 2009. ACL889A codec.

No sound from headphone port. Seems to detect plug / unplug OK.

Works OK when machine booted to OS X or Windows 7.

Have found several bug repors on similar issues with Mac laptops but no fixes.

Have written e-mail with David Henningsson on problem but unable to find a solution.

ALSA-info output:

http://www.alsa-project.org/db/?f=1dc7146eb34af5ad307d029868f775fac5e2764e

Signature · 2 lines
TD
[email protected]
#1 lore raw

2015-05-08 21:58 GMT+08:00 Todd Dailey <[email protected]>:

Quoted 12 lines

https://bugtrack.alsa-project.org/alsa-bug does not work so following instructions to post bug here.

Linux 4. Mac Pro 2009. ACL889A codec.

No sound from headphone port. Seems to detect plug / unplug OK.

Works OK when machine booted to OS X or Windows 7.

Have found several bug repors on similar issues with Mac laptops but no fixes.

Quoted 8 lines

Have written e-mail with David Henningsson on problem but unable to find a solution.

ALSA-info output:

http://www.alsa-project.org/db/?f=1dc7146eb34af5ad307d029868f775fac5e2764e

Do your macpro spec support 5.1 ?

Simple mixer control 'Channel Mode',0
Capabilities: enum
Items: '2ch' '4ch' '6ch'
Item0: '2ch'

Pin default seem incorrect

1) Headphone at ext Rear
2) Line Out does not support jack detection
3) Mic jack ????

/sys/class/sound/hwC0D0/init_pin_configs:
0x14 0x01010150
0x15 0x400000f0
0x16 0x400000f0
0x17 0x400000f0
0x18 0x01a19070
0x19 0x01214040
0x1a 0x01813010
0x1b 0x90100130
0x1c 0x400000f0
0x1d 0x400000f0
0x1e 0x0145e160
0x1f 0x01c5e120

/sys/class/sound/hwC0D0/driver_pin_configs:

[    4.057250] sound hdaudioC0D0: ALC889A: SKU not ready 0x400000f0
[    4.057633] sound hdaudioC0D0: autoconfig for ALC889A: line_outs=1
(0x14/0x0/0x0/0x0/0x0) type:line
[    4.057636] sound hdaudioC0D0:    speaker_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.057638] sound hdaudioC0D0:    hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[    4.057639] sound hdaudioC0D0:    mono: mono_out=0x0
[    4.057641] sound hdaudioC0D0:    dig-out=0x1e/0x0
[    4.057642] sound hdaudioC0D0:    inputs:
[    4.057645] sound hdaudioC0D0:      Mic=0x18
[    4.057646] sound hdaudioC0D0:      Line=0x1a
[    4.057648] sound hdaudioC0D0:    dig-in=0x1f
#2 lore raw

Bingo: the pin-outs are very incorrect.

This is the (original) tech specs of the machine.

https://support.apple.com/kb/SP506?viewlocale=en_US&locale=en_US

Note:

1 x internal speaker
1 x FRONT headphone port
1 x REAR line out port
1 x REAR line in port
1 x REAR optical TOSLINK out port 1 x REAR optical TOSLINK in port

The machine does not have a built-in mic port.

Signature · 2 lines
TD
[email protected]
Quoted 68 lines · Raymond Yau

2015-05-08 21:58 GMT+08:00 Todd Dailey <[email protected] <mailto:[email protected]>>:

https://bugtrack.alsa-project.org/alsa-bug does not work so following instructions to post bug here.

Linux 4. Mac Pro 2009. ACL889A codec.

No sound from headphone port. Seems to detect plug / unplug OK.

Works OK when machine booted to OS X or Windows 7.

Have found several bug repors on similar issues with Mac laptops but no fixes.

Have written e-mail with David Henningsson on problem but unable to find a solution.

ALSA-info output:

http://www.alsa-project.org/db/?f=1dc7146eb34af5ad307d029868f775fac5e2764e

Do your macpro spec support 5.1 ?

Simple mixer control 'Channel Mode',0
Capabilities: enum
Items: '2ch' '4ch' '6ch'
Item0: '2ch'

Pin default seem incorrect

1) Headphone at ext Rear
2) Line Out does not support jack detection
3) Mic jack ????

/sys/class/sound/hwC0D0/init_pin_configs:
0x14 0x01010150
0x15 0x400000f0
0x16 0x400000f0
0x17 0x400000f0
0x18 0x01a19070
0x19 0x01214040
0x1a 0x01813010
0x1b 0x90100130
0x1c 0x400000f0
0x1d 0x400000f0
0x1e 0x0145e160
0x1f 0x01c5e120

/sys/class/sound/hwC0D0/driver_pin_configs:

[    4.057250] sound hdaudioC0D0: ALC889A: SKU not ready 0x400000f0
[    4.057633] sound hdaudioC0D0: autoconfig for ALC889A: line_outs=1
(0x14/0x0/0x0/0x0/0x0) type:line
[    4.057636] sound hdaudioC0D0:    speaker_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.057638] sound hdaudioC0D0:    hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[    4.057639] sound hdaudioC0D0:    mono: mono_out=0x0
[    4.057641] sound hdaudioC0D0:    dig-out=0x1e/0x0
[    4.057642] sound hdaudioC0D0:    inputs:
[    4.057645] sound hdaudioC0D0:      Mic=0x18
[    4.057646] sound hdaudioC0D0:      Line=0x1a
[    4.057648] sound hdaudioC0D0:    dig-in=0x1f
#15 lore raw
In reply to Raymond Yau

Should have noted, if not clear from the physical ports, no, the machine does not have outputs for 5.1 surround sound.

Signature · 2 lines
TD
[email protected]
Quoted 68 lines · Raymond Yau

2015-05-08 21:58 GMT+08:00 Todd Dailey <[email protected] <mailto:[email protected]>>:

https://bugtrack.alsa-project.org/alsa-bug does not work so following instructions to post bug here.

Linux 4. Mac Pro 2009. ACL889A codec.

No sound from headphone port. Seems to detect plug / unplug OK.

Works OK when machine booted to OS X or Windows 7.

Have found several bug repors on similar issues with Mac laptops but no fixes.

Have written e-mail with David Henningsson on problem but unable to find a solution.

ALSA-info output:

http://www.alsa-project.org/db/?f=1dc7146eb34af5ad307d029868f775fac5e2764e

Do your macpro spec support 5.1 ?

Simple mixer control 'Channel Mode',0
Capabilities: enum
Items: '2ch' '4ch' '6ch'
Item0: '2ch'

Pin default seem incorrect

1) Headphone at ext Rear
2) Line Out does not support jack detection
3) Mic jack ????

/sys/class/sound/hwC0D0/init_pin_configs:
0x14 0x01010150
0x15 0x400000f0
0x16 0x400000f0
0x17 0x400000f0
0x18 0x01a19070
0x19 0x01214040
0x1a 0x01813010
0x1b 0x90100130
0x1c 0x400000f0
0x1d 0x400000f0
0x1e 0x0145e160
0x1f 0x01c5e120

/sys/class/sound/hwC0D0/driver_pin_configs:

[    4.057250] sound hdaudioC0D0: ALC889A: SKU not ready 0x400000f0
[    4.057633] sound hdaudioC0D0: autoconfig for ALC889A: line_outs=1
(0x14/0x0/0x0/0x0/0x0) type:line
[    4.057636] sound hdaudioC0D0:    speaker_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.057638] sound hdaudioC0D0:    hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[    4.057639] sound hdaudioC0D0:    mono: mono_out=0x0
[    4.057641] sound hdaudioC0D0:    dig-out=0x1e/0x0
[    4.057642] sound hdaudioC0D0:    inputs:
[    4.057645] sound hdaudioC0D0:      Mic=0x18
[    4.057646] sound hdaudioC0D0:      Line=0x1a
[    4.057648] sound hdaudioC0D0:    dig-in=0x1f
#3 lore raw
In reply to Todd Dailey

2015-05-08 22:48 GMT+08:00 Todd Dailey <[email protected]>:

Quoted 11 lines

Bingo: the pin-outs are very incorrect.

This is the (original) tech specs of the machine.

https://support.apple.com/kb/SP506?viewlocale=en_US&locale=en_US

Note:

1 x internal speaker
1 x FRONT headphone port

Refer to user manual ,
Headphone Jack
Connect headphones, including Apple Earphone with remote and mic through the headphone mini jack

Is node 0x18 headset mic ?
need specific sequence number and parser_flags

https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pci/hda?id=cb420b1186e0090f24137855e14e6f3bf7cb769d

+#define HDA_PINCFG_HEADSET_MIC (1 << 2) /* Try to find headset mic; mark
seq number as 0xc to trigger */

Quoted 2 lines

1 x REAR line out port

1 x REAR line in port

Quoted 5 lines

1 x REAR optical TOSLINK out port
1 x REAR optical TOSLINK in port

The machine does not have a built-in mic port.

you need to use hdajacksensetest to verify hp, line out , line in jacks are node 0x19, 0x14 and 0x1a by plug and unplug those jacks

clear bit 8 of pin default of Line Out Jack if it return correct jack state

Quoted 1 line

Should have noted, if not clear from the physical ports, no, the machine

does not have outputs for 5.1 surround sound.

http://www.intel.com/support/motherboards/desktop/sb/CS-034206.htm

you can enable multi-streaming by indep_hp=1

Quoted 64 lines
Quoted 64 lines

Linux 4. Mac Pro 2009. ACL889A codec.

No sound from headphone port. Seems to detect plug / unplug OK.

Works OK when machine booted to OS X or Windows 7.

Have found several bug repors on similar issues with Mac laptops but no fixes.

Have written e-mail with David Henningsson on problem but unable to find a solution.

ALSA-info output:

http://www.alsa-project.org/db/?f=1dc7146eb34af5ad307d029868f775fac5e2764e

Do your macpro spec support 5.1 ?

Simple mixer control 'Channel Mode',0
Capabilities: enum
Items: '2ch' '4ch' '6ch'
Item0: '2ch'

Pin default seem incorrect

1) Headphone at ext Rear
2) Line Out does not support jack detection
3) Mic jack ????

/sys/class/sound/hwC0D0/init_pin_configs:
0x14 0x01010150
0x15 0x400000f0
0x16 0x400000f0
0x17 0x400000f0
0x18 0x01a19070
0x19 0x01214040
0x1a 0x01813010
0x1b 0x90100130
0x1c 0x400000f0
0x1d 0x400000f0
0x1e 0x0145e160
0x1f 0x01c5e120

/sys/class/sound/hwC0D0/driver_pin_configs:

[    4.057250] sound hdaudioC0D0: ALC889A: SKU not ready 0x400000f0
[    4.057633] sound hdaudioC0D0: autoconfig for ALC889A: line_outs=1
(0x14/0x0/0x0/0x0/0x0) type:line
[    4.057636] sound hdaudioC0D0:    speaker_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.057638] sound hdaudioC0D0:    hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[    4.057639] sound hdaudioC0D0:    mono: mono_out=0x0
[    4.057641] sound hdaudioC0D0:    dig-out=0x1e/0x0
[    4.057642] sound hdaudioC0D0:    inputs:
[    4.057645] sound hdaudioC0D0:      Mic=0x18
[    4.057646] sound hdaudioC0D0:      Line=0x1a
[    4.057648] sound hdaudioC0D0:    dig-in=0x1f
#4 lore raw

You will need to provide more specific instructions on what you want. I do not read code.

Signature · 2 lines
TD
[email protected]
Quoted 122 lines · Raymond Yau

2015-05-08 22:48 GMT+08:00 Todd Dailey <[email protected] <mailto:[email protected]>>:

Bingo: the pin-outs are very incorrect.

This is the (original) tech specs of the machine.

https://support.apple.com/kb/SP506?viewlocale=en_US&locale=en_US

Note:

1 x internal speaker
1 x FRONT headphone port

Refer to user manual ,
Headphone Jack
Connect headphones, including Apple Earphone with remote and mic through the headphone mini jack

Is node 0x18 headset mic ?
need specific sequence number and parser_flags

https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pci/hda?id=cb420b1186e0090f24137855e14e6f3bf7cb769d

+#define HDA_PINCFG_HEADSET_MIC (1 << 2) /* Try to find headset mic;
mark seq number as 0xc to trigger */

1 x REAR line out port

1 x REAR line in port
1 x REAR optical TOSLINK out port
1 x REAR optical TOSLINK in port

The machine does not have a built-in mic port.

you need to use hdajacksensetest to verify hp, line out , line in jacks are node 0x19, 0x14 and 0x1a by plug and unplug those jacks

clear bit 8 of pin default of Line Out Jack if it return correct jack state

Quoted 1 line

Should have noted, if not clear from the physical ports, no, the

machine does not have outputs for 5.1 surround sound.

http://www.intel.com/support/motherboards/desktop/sb/CS-034206.htm

you can enable multi-streaming by indep_hp=1

             Linux 4. Mac Pro 2009. ACL889A codec.

             No sound from headphone port. Seems to detect plug / unplug OK.

             Works OK when machine booted to OS X or Windows 7.

             Have found several bug repors on similar issues with Mac
        laptops but
             no fixes.

             Have written e-mail with David Henningsson on problem but
        unable to
             find a solution.

             ALSA-info output:

        http://www.alsa-project.org/db/?f=1dc7146eb34af5ad307d029868f775fac5e2764e


        Do your macpro spec support 5.1 ?

        Simple mixer control 'Channel Mode',0
            Capabilities: enum
            Items: '2ch' '4ch' '6ch'
            Item0: '2ch'

        Pin default seem incorrect

        1) Headphone at ext Rear
        2) Line Out does not support jack detection
        3) Mic jack ????

        /sys/class/sound/hwC0D0/init_pin_configs:
        0x14 0x01010150
        0x15 0x400000f0
        0x16 0x400000f0
        0x17 0x400000f0
        0x18 0x01a19070
        0x19 0x01214040
        0x1a 0x01813010
        0x1b 0x90100130
        0x1c 0x400000f0
        0x1d 0x400000f0
        0x1e 0x0145e160
        0x1f 0x01c5e120

        /sys/class/sound/hwC0D0/driver_pin_configs:



        [    4.057250] sound hdaudioC0D0: ALC889A: SKU not ready 0x400000f0
        [    4.057633] sound hdaudioC0D0: autoconfig for ALC889A:
        line_outs=1
        (0x14/0x0/0x0/0x0/0x0) type:line
        [    4.057636] sound hdaudioC0D0:    speaker_outs=1
        (0x1b/0x0/0x0/0x0/0x0)
        [    4.057638] sound hdaudioC0D0:    hp_outs=1
        (0x19/0x0/0x0/0x0/0x0)
        [    4.057639] sound hdaudioC0D0:    mono: mono_out=0x0
        [    4.057641] sound hdaudioC0D0:    dig-out=0x1e/0x0
        [    4.057642] sound hdaudioC0D0:    inputs:
        [    4.057645] sound hdaudioC0D0:      Mic=0x18
        [    4.057646] sound hdaudioC0D0:      Line=0x1a
        [    4.057648] sound hdaudioC0D0:    dig-in=0x1f
#6 lore raw
In reply to a message not in the archive
Quoted 2 lines

You will need to provide more specific instructions on what you want. I

do not read code.

Quoted 1 line

https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pci/hda?id=29ebe40284c75a5888c601872059fca7e258528d

Quoted 19 lines
Quoted 19 lines

Bingo: the pin-outs are very incorrect.

This is the (original) tech specs of the machine.

https://support.apple.com/kb/SP506?viewlocale=en_US&locale=en_US

Note:

1 x internal speaker
1 x FRONT headphone port

Refer to user manual ,
Headphone Jack
Connect headphones, including Apple Earphone with remote and mic through the headphone mini jack

Quoted 4 lines
Quoted 4 lines

Is node 0x18 headset mic ?
need specific sequence number and parser_flags

https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pci/hda?id=cb420b1186e0090f24137855e14e6f3bf7cb769d

Quoted 10 lines
Quoted 10 lines

+#define HDA_PINCFG_HEADSET_MIC (1 << 2) /* Try to find headset mic;
mark seq number as 0xc to trigger */

1 x REAR line out port

1 x REAR line in port
1 x REAR optical TOSLINK out port
1 x REAR optical TOSLINK in port

Quoted 7 lines
Quoted 7 lines

The machine does not have a built-in mic port.

you need to use hdajacksensetest to verify hp, line out , line in jacks are node 0x19, 0x14 and 0x1a by plug and unplug those jacks

clear bit 8 of pin default of Line Out Jack if it return correct jack

state

Quoted 6 lines
Quoted 6 lines

Linux 4. Mac Pro 2009. ACL889A codec.

No sound from headphone port. Seems to detect plug / unplug

OK.

Quoted 7 lines
Quoted 7 lines

Works OK when machine booted to OS X or Windows 7.

Have found several bug repors on similar issues with Mac
laptops but
no fixes.

Quoted 7 lines
Quoted 7 lines

Have written e-mail with David Henningsson on problem but
unable to
find a solution.

ALSA-info output:

http://www.alsa-project.org/db/?f=1dc7146eb34af5ad307d029868f775fac5e2764e

Quoted 8 lines
Quoted 8 lines

Do your macpro spec support 5.1 ?

Simple mixer control 'Channel Mode',0
Capabilities: enum
Items: '2ch' '4ch' '6ch'
Item0: '2ch'

Channel mode is created when there are three or more jacks at same location

Use hdajackretask to change location of HP and Mic from Ext Rear to Ext Front

Advanced override and set as boot default

http://git.alsa-project.org/?p=alsa-tools.git;a=blob;f=hdajackretask/README;hb=HEAD

http://voices.canonical.com/david.henningsson/2011/11/29/turn-your-mic-jack-into-a-headphone-jack/

http://git.alsa-project.org/?p=alsa-tools.git;a=tree;f=hdajacksensetest;hb=HEAD

Use hdajacksensetest -a to verify line out support jack detect

clear MISC = NO_PRESENCE bit 8 of pin default of Line out by hdajackretask

Pin Default 0x01010050: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Unknown DefAssociation = 0x5, Sequence = 0x0

Most likely need vendor coefficient to support mono mic of apple earphones

Quoted 21 lines
Quoted 21 lines
        Pin default seem incorrect

        1) Headphone at ext Rear
        2) Line Out does not support jack detection
        3) Mic jack ????

        /sys/class/sound/hwC0D0/init_pin_configs:
        0x14 0x01010150
        0x15 0x400000f0
        0x16 0x400000f0
        0x17 0x400000f0
        0x18 0x01a19070
        0x19 0x01214040
        0x1a 0x01813010
        0x1b 0x90100130
        0x1c 0x400000f0
        0x1d 0x400000f0
        0x1e 0x0145e160
        0x1f 0x01c5e120
Quoted 5 lines
Quoted 5 lines
        /sys/class/sound/hwC0D0/driver_pin_configs:



        [    4.057250] sound hdaudioC0D0: ALC889A: SKU not ready

0x400000f0

Quoted 15 lines
Quoted 15 lines
        [    4.057633] sound hdaudioC0D0: autoconfig for ALC889A:
        line_outs=1
        (0x14/0x0/0x0/0x0/0x0) type:line
        [    4.057636] sound hdaudioC0D0:    speaker_outs=1
        (0x1b/0x0/0x0/0x0/0x0)
        [    4.057638] sound hdaudioC0D0:    hp_outs=1
        (0x19/0x0/0x0/0x0/0x0)
        [    4.057639] sound hdaudioC0D0:    mono: mono_out=0x0
        [    4.057641] sound hdaudioC0D0:    dig-out=0x1e/0x0
        [    4.057642] sound hdaudioC0D0:    inputs:
        [    4.057645] sound hdaudioC0D0:      Mic=0x18
        [    4.057646] sound hdaudioC0D0:      Line=0x1a
        [    4.057648] sound hdaudioC0D0:    dig-in=0x1f
#7 lore raw

Has there been any progress on fixing this issue?

It seems that no matter what combination of settings I try with hdajackretask, I cannot get sound from the headphone port.

Jack in / out plugged status is correctly detected. However, selecting Headphones for output plays sound from the Line Out port. The Line Out port selection works as expected. I can set separate volume levels for both Headphone and Line Out but both selections play through the Line Out port.

I'm surprised that this is so difficult to get right. Both OS X and Windows control all ports perfectly.

Signature · 2 lines
TD
[email protected]
Quoted 148 lines · Raymond Yau
Quoted 3 lines

You will need to provide more specific instructions on what you want.

I do not read code.

Quoted 1 line

https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pci/hda?id=29ebe40284c75a5888c601872059fca7e258528d

Quoted 7 lines
Quoted 7 lines

Bingo: the pin-outs are very incorrect.

This is the (original) tech specs of the machine.

https://support.apple.com/kb/SP506?viewlocale=en_US&locale=en_US

<https://support.apple.com/kb/SP506?viewlocale=en_US&locale=en_US>

Quoted 26 lines
Quoted 26 lines

Note:

1 x internal speaker
1 x FRONT headphone port

Refer to user manual ,
Headphone Jack
Connect headphones, including Apple Earphone with remote and mic through the headphone mini jack

Is node 0x18 headset mic ?
need specific sequence number and parser_flags

https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pci/hda?id=cb420b1186e0090f24137855e14e6f3bf7cb769d <https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pci/hda?id=cb420b1186e0090f24137855e14e6f3bf7cb769d>

+#define HDA_PINCFG_HEADSET_MIC (1 << 2) /* Try to find headset mic;
mark seq number as 0xc to trigger */

1 x REAR line out port

1 x REAR line in port
1 x REAR optical TOSLINK out port
1 x REAR optical TOSLINK in port

Quoted 7 lines
Quoted 7 lines

The machine does not have a built-in mic port.

you need to use hdajacksensetest to verify hp, line out , line in jacks are node 0x19, 0x14 and 0x1a by plug and unplug those jacks

clear bit 8 of pin default of Line Out Jack if it return correct

jack state

Quoted 6 lines
Quoted 6 lines

Linux 4. Mac Pro 2009. ACL889A codec.

No sound from headphone port. Seems to detect plug /

unplug OK.

Quoted 7 lines
Quoted 7 lines

Works OK when machine booted to OS X or Windows 7.

Have found several bug repors on similar issues with Mac
laptops but
no fixes.

Quoted 7 lines
Quoted 7 lines

Have written e-mail with David Henningsson on problem but
unable to
find a solution.

ALSA-info output:

http://www.alsa-project.org/db/?f=1dc7146eb34af5ad307d029868f775fac5e2764e
<http://www.alsa-project.org/db/?f=1dc7146eb34af5ad307d029868f775fac5e2764e>

Quoted 8 lines
Quoted 8 lines

Do your macpro spec support 5.1 ?

Simple mixer control 'Channel Mode',0
Capabilities: enum
Items: '2ch' '4ch' '6ch'
Item0: '2ch'

Channel mode is created when there are three or more jacks at same location

Use hdajackretask to change location of HP and Mic from Ext Rear to Ext Front

Advanced override and set as boot default

http://git.alsa-project.org/?p=alsa-tools.git;a=blob;f=hdajackretask/README;hb=HEAD

http://voices.canonical.com/david.henningsson/2011/11/29/turn-your-mic-jack-into-a-headphone-jack/

http://git.alsa-project.org/?p=alsa-tools.git;a=tree;f=hdajacksensetest;hb=HEAD

Use hdajacksensetest -a to verify line out support jack detect

clear MISC = NO_PRESENCE bit 8 of pin default of Line out by hdajackretask

Pin Default 0x01010050: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Unknown DefAssociation = 0x5, Sequence = 0x0

Most likely need vendor coefficient to support mono mic of apple earphones

Quoted 21 lines
Quoted 21 lines
        Pin default seem incorrect

        1) Headphone at ext Rear
        2) Line Out does not support jack detection
        3) Mic jack ????

        /sys/class/sound/hwC0D0/init_pin_configs:
        0x14 0x01010150
        0x15 0x400000f0
        0x16 0x400000f0
        0x17 0x400000f0
        0x18 0x01a19070
        0x19 0x01214040
        0x1a 0x01813010
        0x1b 0x90100130
        0x1c 0x400000f0
        0x1d 0x400000f0
        0x1e 0x0145e160
        0x1f 0x01c5e120
Quoted 5 lines
Quoted 5 lines
        /sys/class/sound/hwC0D0/driver_pin_configs:



        [    4.057250] sound hdaudioC0D0: ALC889A: SKU not ready

0x400000f0

Quoted 15 lines
Quoted 15 lines
        [    4.057633] sound hdaudioC0D0: autoconfig for ALC889A:
        line_outs=1
        (0x14/0x0/0x0/0x0/0x0) type:line
        [    4.057636] sound hdaudioC0D0:    speaker_outs=1
        (0x1b/0x0/0x0/0x0/0x0)
        [    4.057638] sound hdaudioC0D0:    hp_outs=1
        (0x19/0x0/0x0/0x0/0x0)
        [    4.057639] sound hdaudioC0D0:    mono: mono_out=0x0
        [    4.057641] sound hdaudioC0D0:    dig-out=0x1e/0x0
        [    4.057642] sound hdaudioC0D0:    inputs:
        [    4.057645] sound hdaudioC0D0:      Mic=0x18
        [    4.057646] sound hdaudioC0D0:      Line=0x1a
        [    4.057648] sound hdaudioC0D0:    dig-in=0x1f
#8 lore raw

l

Quoted 3 lines

Has there been any progress on fixing this issue?

It seems that no matter what combination of settings I try with

hdajackretask, I cannot get sound from the headphone port.

Can you post the output after you retasking ?

Quoted 2 lines

Jack in / out plugged status is correctly detected. However, selecting

Headphones for output plays sound from the Line Out port. The Line Out port selection works as expected. I can set separate volume levels for both Headphone and Line Out but both selections play through the Line Out port.

Need your patched alsa-info when headpone unpluged and plugged

For the headset mic

Seem need to recompile alsa driver since spec->parser_flags cannot be changed by hint.

spec->parser_flags = HDA_PINCFG_HEADSET_MIC;

It also depend whether you alc889a need any vendor coeff

#9 lore raw

As I have time to work on this ...

ALSA info headphone unplugged:

http://www.alsa-project.org/db/?f=df059dc59473b812033be118a26a553767879f41

Headphone plugged:

http://www.alsa-project.org/db/?f=b91b9b46a1abe043b9dfc3bc4802b203e6a6c2e5

Signature · 2 lines
TD
[email protected]
Quoted 26 lines · Raymond Yau

l

Quoted 3 lines

Has there been any progress on fixing this issue?

It seems that no matter what combination of settings I try with

hdajackretask, I cannot get sound from the headphone port.

Can you post the output after you retasking ?

Quoted 2 lines

Jack in / out plugged status is correctly detected. However,

selecting Headphones for output plays sound from the Line Out port. The Line Out port selection works as expected. I can set separate volume levels for both Headphone and Line Out but both selections play through the Line Out port.

Need your patched alsa-info when headpone unpluged and plugged

For the headset mic

Seem need to recompile alsa driver since spec->parser_flags cannot be changed by hint.

spec->parser_flags = HDA_PINCFG_HEADSET_MIC;

It also depend whether you alc889a need any vendor coeff

#10 lore raw
Quoted 11 lines

As I have time to work on this ...

ALSA info headphone unplugged:

http://www.alsa-project.org/db/?f=df059dc59473b812033be118a26a553767879f41

Headphone plugged:

http://www.alsa-project.org/db/?f=b91b9b46a1abe043b9dfc3bc4802b203e6a6c2e5

You did not retask correctly

1) change hp from ext rear to ext front
2) change Mic from ext rear to ext front

The driver don't create channel mode when there is only two jacks at ext rear

3) clear misc bit 8 of pin default of line out

You should use save as boot default instead of dynamic reconfig and reboot

#11 lore raw

Correct: This was just the raw, unaltered states for baseline.

Will experiment with retaking later.

Signature · 2 lines
TD
[email protected]
Quoted 27 lines · Raymond Yau
Quoted 7 lines

As I have time to work on this ...

ALSA info headphone unplugged:

http://www.alsa-project.org/db/?f=df059dc59473b812033be118a26a553767879f41

Quoted 4 lines

Headphone plugged:

http://www.alsa-project.org/db/?f=b91b9b46a1abe043b9dfc3bc4802b203e6a6c2e5

Quoted 1 line

You did not retask correctly

1) change hp from ext rear to ext front
2) change Mic from ext rear to ext front

The driver don't create channel mode when there is only two jacks at ext rear

3) clear misc bit 8 of pin default of line out

You should use save as boot default instead of dynamic reconfig and reboot

#12 lore raw
In reply to Raymond Yau

I will need more instruction on how to accomplish step #3.

"3) clear misc bit 8 of pin default of line out"

Thus far, moving both HP and Mic to "Front" gives no improvement.

Signature · 2 lines
TD
[email protected]
Quoted 27 lines · Raymond Yau
Quoted 7 lines

As I have time to work on this ...

ALSA info headphone unplugged:

http://www.alsa-project.org/db/?f=df059dc59473b812033be118a26a553767879f41

Quoted 4 lines

Headphone plugged:

http://www.alsa-project.org/db/?f=b91b9b46a1abe043b9dfc3bc4802b203e6a6c2e5

Quoted 1 line

You did not retask correctly

1) change hp from ext rear to ext front
2) change Mic from ext rear to ext front

The driver don't create channel mode when there is only two jacks at ext rear

3) clear misc bit 8 of pin default of line out

You should use save as boot default instead of dynamic reconfig and reboot

#13 lore raw
Quoted 7 lines

I will need more instruction on how to accomplish step 3

"3) clear misc bit 8 of pin default of line out"

Thus far, moving both HP and Mic to "Front" gives no improvement.

Post output of alsa info after you fix hp and mic to ext front

http://git.alsa-project.org/?p=alsa-tools.git;a=blob;f=hdajackretask/README;hb=HEAD

You previous alsa info show you have changed those unconnected pin complex to connected

You don't need to check show unconnected pin if your three pin complex

line out, line in and hp can be detected by hdajacksensetest -a

You need to use advanced override mode to change ext front and jack detection

http://git.alsa-project.org/?p=alsa-tools.git;a=blob;f=hdajackretask/main-gtk.c;hb=HEAD

          gtk_grid_attach(grid, gtk_label_new("Color"), 0, 2, 1, 1);
         gtk_grid_attach(grid, data->free_override_cb[4], 0, 3, 1, 1);
         gtk_grid_attach(grid, gtk_label_new("Jack detection"), 1, 2, 1, 1);
         gtk_grid_attach(grid, data->free_override_cb[5], 1, 3, 1, 1);
         gtk_grid_attach(grid, gtk_label_new("Channel group"), 2, 2, 1, 1);

Since you have internal speaker, line out and headphone need to support jack detection for auto mute

Seem you have changed the other unconnected pin complexes to line out

The name of playback switch should changed from front to line out

MISC= NO_PRESENCE already removed

Line out phantom jack already changed to line out jack But unsolicited event is not enabled
Unsolicited: tag=00, enabled=0

Since you have performed dynamic reconfiguration several times in your dmesg log and the other unconnected pin have changed to line out

You better use set as boot default and reboot instead of dynamic reconfiguration

Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Control: name="Front Playback Switch", index=0, device=0

    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Control: name="Line Out Phantom Jack", index=0, device=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000373c: IN OUT HP Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x01014010: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Green
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x40: OUT VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x
#14 lore raw
In reply to Todd Dailey
Quoted 9 lines

I will need more instruction on how to accomplish step #3.

"3) clear misc bit 8 of pin default of line out"

Thus far, moving both HP and Mic to "Front" gives no improvement.

Many unconnected pin complex have been changed to line out jack

Seem bug of hdajackretask if it allow you to change pin comple which pincap only support IN to line out jack

Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x00000020: IN
Pin Default 0x00000100: [Jack] Line Out at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation = 0x0, Sequence = 0x0 Misc = NO_PRESENCE
Pin-ctls: 0x20: IN