ARM: dts: Add HS400 support for exynos5422-odroidxu3

HS400 timing values are added for exynos5422-odroidxu3 board.

---
Changes since v1:
1. Dropped num_slots
2. Rebased onto 4.1-rc3
3. Added Acked-by tag

---
 arch/arm/boot/dts/exynos5422-odroidxu3.dts | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

index edc25cf..cf86ab2 100644
@@ -311,10 +311,14 @@
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
 	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-hs400-timing = <0 2>;
+	samsung,read-strobe-delay = <90>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
 };
 
 &mmc_2 {

1.9.1

2015-05-11 22:49 GMT+09:00 Markus Reichl <[email protected]>:

Thanks for resubmit, looks good:

Best regards,
Krzysztof

2015-05-11 22:57 GMT+09:00 Krzysztof Kozlowski <[email protected]>:

Does not apply cleanly, please rebase on newest for-next branch of Kukjin's tree.

Best regards,
Krzysztof