Hauppauge 2250 on Ubuntu 15.04
I am trying to get the firmware to load on a fresh install of Ubuntu 15.04 desktop 64-bit on a new system.
uname -a
Linux 3.19.0-15-generic #15-Ubuntu SMP Thu Apr 16 23:32:37 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
lshw
description: Computer
width: 64 bits
capabilities: smbios-2.7 vsyscall32
*-core
description: Motherboard
physical id: 0
*-memory
description: System memory
physical id: 0
size: 7884MiB
*-cpu
product: AMD FX(tm)-8320 Eight-Core Processor
vendor: Advanced Micro Devices [AMD]
physical id: 1
bus info: cpu@0
size: 1400MHz
capacity: 3500MHz
width: 64 bits
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce
cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core perfctr_nb arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold vmmcall bmi1 cpufreq
I have tried for a few hours now. Many combinations / suggestions from the documentation, forum posts, etc. The most recent attempts were made with another fresh install of Ubuntu 15.04 and following the instructions at the following link: http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-2250
Here is what I did on my last attempt after the fresh install.
sudo lshw -C multimedia
*-multimedia
description: Multimedia controller
product: SAA7164
vendor: Philips Semiconductors
physical id: 0
bus info: pci@0000:05:00.0
version: 81
width: 64 bits
clock: 33MHz
capabilities: msi pciexpress pm bus_master cap_list
configuration: driver=saa7164 latency=0
resources: irq:47 memory:fe000000-fe3fffff memory:fdc00000-fdffffff
dmesg | grep 7164
[ 0.000000] On node 0 totalpages: 2071641 [ 0.530288] pci 0000:05:00.0: [1131:7164] type 00 class 0x048000 [ 5.977865] saa7164 driver loaded [ 5.977973] saa7164[0]: Your board isn't known (yet) to the driver. saa7164[0]: Try to pick one of the existing card configs via saa7164[0]: card=<n> insmod option. Updating to the latest saa7164[0]: version might help as well. [ 5.977976] saa7164[0]: Here are valid choices for the card=<n> insmod option: [ 5.977977] saa7164[0]: card=0 -> Unknown [ 5.977978] saa7164[0]: card=1 -> Generic Rev2 [ 5.977979] saa7164[0]: card=2 -> Generic Rev3 [ 5.977981] saa7164[0]: card=3 -> Hauppauge WinTV-HVR2250 [ 5.977981] saa7164[0]: card=4 -> Hauppauge WinTV-HVR2200 [ 5.977982] saa7164[0]: card=5 -> Hauppauge WinTV-HVR2200 [ 5.977983] saa7164[0]: card=6 -> Hauppauge WinTV-HVR2200 [ 5.977984] saa7164[0]: card=7 -> Hauppauge WinTV-HVR2250 [ 5.977985] saa7164[0]: card=8 -> Hauppauge WinTV-HVR2250 [ 5.977986] saa7164[0]: card=9 -> Hauppauge WinTV-HVR2200 [ 5.977987] saa7164[0]: card=10 -> Hauppauge WinTV-HVR2200 [ 5.978018] CORE saa7164[0]: subsystem: 0070:f111, board: Unknown [card=0,autodetected] [ 5.978021] saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 47, latency: 0, mmio: 0xfe000000 [ 5.978037] saa7164_initdev() Unsupported board detected, registering without firmware
- created a file at: /etc/modprobe.d/saa7164.conf with the following contents
options saa7164 card=8
- downloaded the firmware and copied it to /lib/firmware
wget
http://www.steventoth.net/linux/hvr22xx/firmwares/4019072/NXP7164-2010-03-10.1.fw
cp *.fw /lib/firmware
- reboot
- after reboot
dmesg | grep 7164
[ 0.000000] On node 0 totalpages: 2071641 [ 0.530265] pci 0000:05:00.0: [1131:7164] type 00 class 0x048000 [ 1.571643] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: [email protected] [ 6.584365] saa7164 driver loaded [ 6.584503] CORE saa7164[0]: subsystem: 0070:f111, board: Hauppauge WinTV-HVR2250 [card=8,insmod option] [ 6.584506] saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 47, latency: 0, mmio: 0xfe000000 [ 6.758475] saa7164_downloadfirmware() no first image [ 6.758483] saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw) [ 6.836305] saa7164 0000:05:00.0: Direct firmware load for NXP7164-2010-03-10.1.fw failed with error -2 [ 6.836309] saa7164_downloadfirmware() Upload failed. (file not found?) [ 0.000000] On node 0 totalpages: 2071641 [ 0.530263] pci 0000:05:00.0: [1131:7164] type 00 class 0x048000 [ 6.372707] saa7164 driver loaded [ 6.372835] CORE saa7164[0]: subsystem: 0070:f111, board: Hauppauge WinTV-HVR2250 [card=8,insmod option] [ 6.372838] saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 47, latency: 0, mmio: 0xfe000000 [ 6.530496] saa7164_downloadfirmware() no first image [ 6.530505] saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw) [ 6.899014] saa7164_downloadfirmware() firmware read 4019072 bytes. [ 6.899017] saa7164_downloadfirmware() firmware loaded. [ 6.899022] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072 [ 6.899027] saa7164_downloadfirmware() FirmwareSize = 0x1fd6 [ 6.899028] saa7164_downloadfirmware() BSLSize = 0x0 [ 6.899029] saa7164_downloadfirmware() Reserved = 0x0 [ 6.899030] saa7164_downloadfirmware() Version = 0x1661c00 [ 13.650943] saa7164_downloadimage() Image downloaded, booting... [ 13.754950] saa7164_downloadimage() Image booted successfully. [ 16.395094] saa7164_downloadimage() Image downloaded, booting... [ 18.267203] saa7164_downloadimage() Image booted successfully. [ 18.316076] saa7164[0]: Warning: Unknown Hauppauge model #0 [ 18.316078] saa7164[0]: Hauppauge eeprom: model=0 [ 18.380192] saa7164_dvb_register() Frontend initialization failed [ 18.380195] saa7164_initdev() Failed to register dvb adapters on porta [ 18.383340] saa7164_api_i2c_read() error, ret(2) = 0x9 [ 18.383347] saa7164_dvb_register() Frontend initialization failed [ 18.383348] saa7164_initdev() Failed to register dvb adapters on portb [ 18.383411] saa7164[0]: registered device video0 [mpeg] [ 18.618462] saa7164[0]: registered device video1 [mpeg] [ 18.834041] saa7164[0]: registered device vbi0 [vbi] [ 18.834087] saa7164[0]: registered device vbi1 [vbi] [ 18.848471] Modules linked in: s5h1411 amdkfd amd_iommu_v2 kvm_amd snd_hda_codec_realtek kvm radeon snd_hda_codec_gen
eric crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel ttm drm_kms_helper snd_hda_codec_hdmi aes_x86_64 drm snd_hda_intel snd_hda_controller saa7164 i2c_algo_bit snd_hda_codec eeepc_wmi lrw gf128mul tveeprom asus_wmi glue_helper
dvb_core sparse_keymap snd_hwdep v4l2_common video snd_pcm mxm_wmisnd_seq_midi snd_seq_midi_event ablk_helper snd_rawm
idi videodev snd_seq snd_seq_device media snd_timer wmi snd serio_raw soundcore shpchp 8250_fintek cryptd fam15h_power k 10temp edac_core i2c_piix4 tpm_infineon
- edited /etc/modprobe.d/saa7164.conf
changed card=8 to card=7
- rebooted again
dmesg | grep 7164
[ 0.000000] On node 0 totalpages: 2071641 [ 0.530051] pci 0000:05:00.0: [1131:7164] type 00 class 0x048000 [ 7.009868] saa7164 driver loaded [ 7.010007] CORE saa7164[0]: subsystem: 0070:f111, board: Hauppauge WinTV-HVR2250 [card=7,insmod option] [ 7.010010] saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 47, latency: 0, mmio: 0xfe000000 [ 7.178353] saa7164_downloadfirmware() no first image [ 7.178365] saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw) [ 7.561231] saa7164_downloadfirmware() firmware read 4019072 bytes. [ 7.561237] saa7164_downloadfirmware() firmware loaded. [ 7.561251] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072 [ 7.561258] saa7164_downloadfirmware() FirmwareSize = 0x1fd6 [ 7.561260] saa7164_downloadfirmware() BSLSize = 0x0 [ 7.561262] saa7164_downloadfirmware() Reserved = 0x0 [ 7.561264] saa7164_downloadfirmware() Version = 0x1661c00 [ 14.310760] saa7164_downloadimage() Image downloaded, booting... [ 14.414757] saa7164_downloadimage() Image booted successfully. [ 17.054898] saa7164_downloadimage() Image downloaded, booting... [ 18.927006] saa7164_downloadimage() Image booted successfully. [ 18.971706] tveeprom 10-0000: audio processor is SAA7164 (idx 43) [ 18.971707] tveeprom 10-0000: decoder processor is SAA7164 (idx 40) [ 18.971709] saa7164[0]: Warning: Unknown Hauppauge model #151061 [ 18.971711] saa7164[0]: Hauppauge eeprom: model=151061 [ 19.025745] saa7164_dvb_register() Frontend initialization failed [ 19.025748] saa7164_initdev() Failed to register dvb adapters on porta [ 19.028551] saa7164_dvb_register() Frontend initialization failed [ 19.028554] saa7164_initdev() Failed to register dvb adapters on portb [ 19.028614] saa7164[0]: registered device video0 [mpeg] [ 19.263763] saa7164[0]: registered device video1 [mpeg] [ 19.476734] saa7164[0]: registered device vbi0 [vbi] [ 19.476775] saa7164[0]: registered device vbi1 [vbi] [ 19.485472] Modules linked in: s5h1411 amdkfd amd_iommu_v2 radeon ttm snd_hda_codec_realtek snd_hda_codec_generic drm
_kms_helper snd_hda_codec_hdmi snd_hda_intel drm snd_hda_controller snd_hda_codec saa7164 snd_hwdep kvm_amd snd_pcm kvm tveeprom dvb_core snd_seq_midi v4l2_common snd_seq_midi_event snd_rawmidi eeepc_wmi crct10dif_pclmul crc32_pclmul asus_w mi ghash_clmulni_intel snd_seq videodev sparse_keymap media snd_seq_device i2c_algo_bit aesni_intel snd_timer snd video aes_x86_64 mxm_wmi lrw gf128mul glue_helper ablk_helper wmi soundcore k10temp cryptd edac_core shpchp tpm_infineon 8250_ fintek serio_raw i2c_piix4 fam15h_power edac_mce_amd mac_hid parport_pc ppdev lp parport autofs4 hid_generic usbhid hid firewire_ohci psmouse firewire_core ahci crc_itu_t r8169 libahci mii
Any help would be deeply appreciated.
Hi Jeff,
Based on the PCI subsystem ID I think your card is actually HVR-2255 and not the older HVR-2250. Check what it says on the card. Some people have reported buying a HVR-2250, but receiving actually a HVR-2255.
Anyway, HVR-2255 is supported by the media_tree these days, but you need to build the driver yourself before kernel 4.2 is out. Follow the steps here to do that:
http://git.linuxtv.org/cgit.cgi/media_build.git/about/
Cheers,
-olli
Quoted 225 lines · Jeff Allen
I am trying to get the firmware to load on a fresh install of Ubuntu 15.04 desktop 64-bit on a new system.
uname -a
Linux 3.19.0-15-generic #15-Ubuntu SMP Thu Apr 16 23:32:37 UTC 2015x86_64x86_64x86_64GNU/Linuxlshw
description: Computer
width: 64 bits
capabilities: smbios-2.7 vsyscall32
*-core
description: Motherboard
physical id: 0
*-memory
description: System memory
physical id: 0
size: 7884MiB
*-cpu
product: AMD FX(tm)-8320 Eight-Core Processor
vendor: Advanced Micro Devices [AMD]
physical id: 1
bus info: cpu@0
size: 1400MHz
capacity: 3500MHz
width: 64 bits
capabilities: fpufpu_exceptionwp vme de pse tsc msr pae mce cx8
apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxextfxsr_optpdpe1gb rdtscp x86-64constant_tscrep_goodnoplnonstop_tscextd_apicidaperfmperf pni pclmulqdq monitor ssse3 fma cx16sse4_1sse4_2popcnt aes xsave avx f16clahf_lmcmp_legacysvm extapiccr8_legacyabm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tcenodeid_msrtbm topoextperfctr_coreperfctr_nbarat cpbhw_pstatenpt lbrvsvm_locknrip_savetsc_scalevmcb_cleanflushbyasid decodeassists pausefilter pfthreshold vmmcall bmi1 cpufreqI have tried for a few hours now. Many combinations / suggestions from the documentation, forum posts, etc. The most recent attempts were made with another fresh install of Ubuntu 15.04 and following the instructions at the following link:
http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-2250Here is what I did on my last attempt after the fresh install.
sudo lshw -C multimedia
*-multimedia
description: Multimedia controller
product: SAA7164
vendor: Philips Semiconductors
physical id: 0
bus info: pci@0000:05:00.0
version: 81
width: 64 bits
clock: 33MHz
capabilities: msi pciexpress pmbus_mastercap_list
configuration: driver=saa7164 latency=0
resources: irq:47 memory:fe000000-fe3fffff memory:fdc00000-fdffffffdmesg | grep 7164
[ 0.000000] On node 0 totalpages: 2071641 [ 0.530288] pci 0000:05:00.0: [1131:7164] type 00 class 0x048000 [ 5.977865] saa7164 driver loaded [ 5.977973] saa7164[0]: Your board isn't known (yet) to the driver. saa7164[0]: Try to pick one of the existing card configs via saa7164[0]: card=<n> insmod option. Updating to the latest saa7164[0]: version might help as well. [ 5.977976] saa7164[0]: Here are valid choices for the card=<n> insmod option: [ 5.977977] saa7164[0]: card=0 -> Unknown [ 5.977978] saa7164[0]: card=1 -> Generic Rev2 [ 5.977979] saa7164[0]: card=2 -> Generic Rev3 [ 5.977981] saa7164[0]: card=3 -> Hauppauge WinTV-HVR2250 [ 5.977981] saa7164[0]: card=4 -> Hauppauge WinTV-HVR2200 [ 5.977982] saa7164[0]: card=5 -> Hauppauge WinTV-HVR2200 [ 5.977983] saa7164[0]: card=6 -> Hauppauge WinTV-HVR2200 [ 5.977984] saa7164[0]: card=7 -> Hauppauge WinTV-HVR2250 [ 5.977985] saa7164[0]: card=8 -> Hauppauge WinTV-HVR2250 [ 5.977986] saa7164[0]: card=9 -> Hauppauge WinTV-HVR2200 [ 5.977987] saa7164[0]: card=10 -> Hauppauge WinTV-HVR2200 [ 5.978018] CORE saa7164[0]: subsystem: 0070:f111, board: Unknown [card=0,autodetected] [ 5.978021] saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 47, latency: 0, mmio: 0xfe000000 [ 5.978037] saa7164_initdev() Unsupported board detected, registeringwithout firmware
- created a file at:
/etc/modprobe.d/saa7164.confwith the following contentsoptions saa7164 card=8
- downloaded the firmware and copied it to
/lib/firmwarewget
http://www.steventoth.net/linux/hvr22xx/firmwares/4019072/NXP7164-2010-03-10.1.fw
cp *.fw/lib/firmware- reboot
- after reboot
dmesg | grep 7164
[ 0.000000] On node 0 totalpages: 2071641 [ 0.530265] pci 0000:05:00.0: [1131:7164] type 00 class 0x048000 [ 1.571643] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: [email protected] [ 6.584365] saa7164 driver loaded [ 6.584503] CORE saa7164[0]: subsystem: 0070:f111, board: Hauppauge WinTV-HVR2250 [card=8,insmod option] [ 6.584506] saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 47, latency: 0, mmio: 0xfe000000 [ 6.758475] saa7164_downloadfirmware() no first image [ 6.758483] saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw) [ 6.836305] saa7164 0000:05:00.0: Direct firmware load for NXP7164-2010-03-10.1.fw failed with error -2 [ 6.836309] saa7164_downloadfirmware() Upload failed. (file not found?) [ 0.000000] On node 0 totalpages: 2071641 [ 0.530263] pci 0000:05:00.0: [1131:7164] type 00 class 0x048000 [ 6.372707] saa7164 driver loaded [ 6.372835] CORE saa7164[0]: subsystem: 0070:f111, board: Hauppauge WinTV-HVR2250 [card=8,insmod option] [ 6.372838] saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 47, latency: 0, mmio: 0xfe000000 [ 6.530496] saa7164_downloadfirmware() no first image [ 6.530505] saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw) [ 6.899014] saa7164_downloadfirmware() firmware read 4019072 bytes. [ 6.899017] saa7164_downloadfirmware() firmware loaded. [ 6.899022] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072 [ 6.899027] saa7164_downloadfirmware() FirmwareSize = 0x1fd6 [ 6.899028] saa7164_downloadfirmware() BSLSize = 0x0 [ 6.899029] saa7164_downloadfirmware() Reserved = 0x0 [ 6.899030] saa7164_downloadfirmware() Version = 0x1661c00 [ 13.650943] saa7164_downloadimage() Image downloaded, booting... [ 13.754950] saa7164_downloadimage() Image booted successfully. [ 16.395094] saa7164_downloadimage() Image downloaded, booting... [ 18.267203] saa7164_downloadimage() Image booted successfully. [ 18.316076] saa7164[0]: Warning: Unknown Hauppauge model #0 [ 18.316078] saa7164[0]: Hauppauge eeprom: model=0 [ 18.380192] saa7164_dvb_register() Frontend initialization failed [ 18.380195] saa7164_initdev() Failed to register dvb adapters on porta [ 18.383340] saa7164_api_i2c_read() error, ret(2) = 0x9 [ 18.383347] saa7164_dvb_register() Frontend initialization failed [ 18.383348] saa7164_initdev() Failed to register dvb adapters on portb [ 18.383411] saa7164[0]: registered device video0 [mpeg] [ 18.618462] saa7164[0]: registered device video1 [mpeg] [ 18.834041] saa7164[0]: registered device vbi0 [vbi] [ 18.834087] saa7164[0]: registered device vbi1 [vbi] [ 18.848471] Modules linked in: s5h1411 amdkfd amd_iommu_v2 kvm_amd
snd_hda_codec_realtekkvm radeonsnd_hda_codec_gen
ericcrct10dif_pclmulcrc32_pclmulghash_clmulni_intelaesni_intelttmdrm_kms_helpersnd_hda_codec_hdmiaes_x86_64drmsnd_hda_intelsnd_hda_controllersaa7164i2c_algo_bitsnd_hda_codeceeepc_wmilrw gf128mul tveepromasus_wmiglue_helper
dvb_coresparse_keymapsnd_hwdepv4l2_commonvideosnd_pcmmxm_wmisnd_seq_midisnd_seq_midi_eventablk_helpersnd_rawm
idi videodevsnd_seqsnd_seq_devicemediasnd_timerwmi sndserio_rawsoundcore shpchp 8250_fintek cryptdfam15h_powerk
10tempedac_corei2c_piix4tpm_infineon- edited
/etc/modprobe.d/saa7164.conf
changed card=8 to card=7- rebooted again
dmesg | grep 7164
[ 0.000000] On node 0 totalpages: 2071641 [ 0.530051] pci 0000:05:00.0: [1131:7164] type 00 class 0x048000 [ 7.009868] saa7164 driver loaded [ 7.010007] CORE saa7164[0]: subsystem: 0070:f111, board: Hauppauge WinTV-HVR2250 [card=7,insmod option] [ 7.010010] saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 47, latency: 0, mmio: 0xfe000000 [ 7.178353] saa7164_downloadfirmware() no first image [ 7.178365] saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw) [ 7.561231] saa7164_downloadfirmware() firmware read 4019072 bytes. [ 7.561237] saa7164_downloadfirmware() firmware loaded. [ 7.561251] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072 [ 7.561258] saa7164_downloadfirmware() FirmwareSize = 0x1fd6 [ 7.561260] saa7164_downloadfirmware() BSLSize = 0x0 [ 7.561262] saa7164_downloadfirmware() Reserved = 0x0 [ 7.561264] saa7164_downloadfirmware() Version = 0x1661c00 [ 14.310760] saa7164_downloadimage() Image downloaded, booting... [ 14.414757] saa7164_downloadimage() Image booted successfully. [ 17.054898] saa7164_downloadimage() Image downloaded, booting... [ 18.927006] saa7164_downloadimage() Image booted successfully. [ 18.971706] tveeprom 10-0000: audio processor is SAA7164 (idx 43) [ 18.971707] tveeprom 10-0000: decoder processor is SAA7164 (idx 40) [ 18.971709] saa7164[0]: Warning: Unknown Hauppauge model #151061 [ 18.971711] saa7164[0]: Hauppauge eeprom: model=151061 [ 19.025745] saa7164_dvb_register() Frontend initialization failed [ 19.025748] saa7164_initdev() Failed to register dvb adapters on porta [ 19.028551] saa7164_dvb_register() Frontend initialization failed [ 19.028554] saa7164_initdev() Failed to register dvb adapters on portb [ 19.028614] saa7164[0]: registered device video0 [mpeg] [ 19.263763] saa7164[0]: registered device video1 [mpeg] [ 19.476734] saa7164[0]: registered device vbi0 [vbi] [ 19.476775] saa7164[0]: registered device vbi1 [vbi] [ 19.485472] Modules linked in: s5h1411 amdkfd amd_iommu_v2 radeon ttm
snd_hda_codec_realteksnd_hda_codec_genericdrm_kms_helpersnd_hda_codec_hdmisnd_hda_inteldrmsnd_hda_controllersnd_hda_codecsaa7164snd_hwdepkvm_amdsnd_pcmkvm
tveepromdvb_coresnd_seq_midiv4l2_commonsnd_seq_midi_eventsnd_rawmidieeepc_wmicrct10dif_pclmulcrc32_pclmulasus_w
mighash_clmulni_intelsnd_seqvideodevsparse_keymapmediasnd_seq_devicei2c_algo_bitaesni_intelsnd_timersnd videoaes_x86_64mxm_wmilrw gf128mulglue_helperablk_helperwmi soundcore k10temp cryptdedac_coreshpchptpm_infineon8250_
fintekserio_rawi2c_piix4fam15h_poweredac_mce_amdmac_hidparport_pcppdev lp parport autofs4hid_genericusbhid hidfirewire_ohcipsmousefirewire_coreahcicrc_itu_tr8169 libahci miiAny help would be deeply appreciated.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
We've had a dozen or two of these cards through our lab and the labels on the card aren't 100% reliable; we've seen both HVR-2250 labelled as HVR-2255 and vice versa.
Jake
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Olli Salonen
Sent: June-10-15 2:57 PM
To: Jeff Allen
Cc: linux-media
Subject: Re: Hauppauge 2250 on Ubuntu 15.04
Hi Jeff,
Based on the PCI subsystem ID I think your card is actually HVR-2255 and not the older HVR-2250. Check what it says on the card. Some people have reported buying a HVR-2250, but receiving actually a HVR-2255.
Anyway, HVR-2255 is supported by the media_tree these days, but you need to build the driver yourself before kernel 4.2 is out. Follow the steps here to do that:
http://git.linuxtv.org/cgit.cgi/media_build.git/about/
Cheers,
-olli
Quoted 223 lines · Jeff Allen
I am trying to get the firmware to load on a fresh install of Ubuntu 15.04 desktop 64-bit on a new system.
uname -a
Linux 3.19.0-15-generic #15-Ubuntu SMP Thu Apr 16 23:32:37 UTC 2015x86_64x86_64x86_64GNU/Linuxlshw
description: Computer
width: 64 bits
capabilities: smbios-2.7 vsyscall32
*-core
description: Motherboard
physical id: 0
*-memory
description: System memory
physical id: 0
size: 7884MiB
*-cpu
product: AMD FX(tm)-8320 Eight-Core Processor
vendor: Advanced Micro Devices [AMD]
physical id: 1
bus info: cpu@0
size: 1400MHz
capacity: 3500MHz
width: 64 bits
capabilities: fpufpu_exceptionwp vme de pse tsc msr pae
mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxextfxsr_optpdpe1gb rdtscp x86-64constant_tscrep_goodnoplnonstop_tscextd_apicidaperfmperf pni pclmulqdq monitor ssse3 fma cx16sse4_1sse4_2popcnt aes xsave avx f16clahf_lmcmp_legacysvm extapiccr8_legacyabm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tcenodeid_msrtbm topoextperfctr_coreperfctr_nbarat cpbhw_pstatenpt lbrvsvm_locknrip_savetsc_scalevmcb_cleanflushbyasid decodeassists pausefilter pfthreshold vmmcall bmi1 cpufreqI have tried for a few hours now. Many combinations / suggestions from the documentation, forum posts, etc. The most recent attempts were made with another fresh install of Ubuntu 15.04 and following the instructions at the following link:
http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-2250Here is what I did on my last attempt after the fresh install.
sudo lshw -C multimedia
*-multimedia
description: Multimedia controller
product: SAA7164
vendor: Philips Semiconductors
physical id: 0
bus info: pci@0000:05:00.0
version: 81
width: 64 bits
clock: 33MHz
capabilities: msi pciexpress pmbus_mastercap_list
configuration: driver=saa7164 latency=0
resources: irq:47 memory:fe000000-fe3fffff
memory:fdc00000-fdffffffdmesg | grep 7164
[ 0.000000] On node 0 totalpages: 2071641 [ 0.530288] pci 0000:05:00.0: [1131:7164] type 00 class 0x048000 [ 5.977865] saa7164 driver loaded [ 5.977973] saa7164[0]: Your board isn't known (yet) to the driver. saa7164[0]: Try to pick one of the existing card configs via saa7164[0]: card=<n> insmod option. Updating to the latest saa7164[0]: version might help as well. [ 5.977976] saa7164[0]: Here are valid choices for the card=<n> insmod option: [ 5.977977] saa7164[0]: card=0 -> Unknown [ 5.977978] saa7164[0]: card=1 -> Generic Rev2 [ 5.977979] saa7164[0]: card=2 -> Generic Rev3 [ 5.977981] saa7164[0]: card=3 -> Hauppauge WinTV-HVR2250 [ 5.977981] saa7164[0]: card=4 -> Hauppauge WinTV-HVR2200 [ 5.977982] saa7164[0]: card=5 -> Hauppauge WinTV-HVR2200 [ 5.977983] saa7164[0]: card=6 -> Hauppauge WinTV-HVR2200 [ 5.977984] saa7164[0]: card=7 -> Hauppauge WinTV-HVR2250 [ 5.977985] saa7164[0]: card=8 -> Hauppauge WinTV-HVR2250 [ 5.977986] saa7164[0]: card=9 -> Hauppauge WinTV-HVR2200 [ 5.977987] saa7164[0]: card=10 -> Hauppauge WinTV-HVR2200 [ 5.978018] CORE saa7164[0]: subsystem: 0070:f111, board: Unknown [card=0,autodetected] [ 5.978021] saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 47, latency: 0, mmio: 0xfe000000 [ 5.978037] saa7164_initdev() Unsupported board detected, registeringwithout firmware
- created a file at:
/etc/modprobe.d/saa7164.confwith the following contentsoptions saa7164 card=8
- downloaded the firmware and copied it to
/lib/firmwarewget
http://www.steventoth.net/linux/hvr22xx/firmwares/4019072/NXP7164-2010-03-10.1.fw
cp *.fw/lib/firmware- reboot
- after reboot
dmesg | grep 7164
[ 0.000000] On node 0 totalpages: 2071641 [ 0.530265] pci 0000:05:00.0: [1131:7164] type 00 class 0x048000 [ 1.571643] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: [email protected] [ 6.584365] saa7164 driver loaded [ 6.584503] CORE saa7164[0]: subsystem: 0070:f111, board: Hauppauge WinTV-HVR2250 [card=8,insmod option] [ 6.584506] saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 47, latency: 0, mmio: 0xfe000000 [ 6.758475] saa7164_downloadfirmware() no first image [ 6.758483] saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw) [ 6.836305] saa7164 0000:05:00.0: Direct firmware load for NXP7164-2010-03-10.1.fw failed with error -2 [ 6.836309] saa7164_downloadfirmware() Upload failed. (file not found?) [ 0.000000] On node 0 totalpages: 2071641 [ 0.530263] pci 0000:05:00.0: [1131:7164] type 00 class 0x048000 [ 6.372707] saa7164 driver loaded [ 6.372835] CORE saa7164[0]: subsystem: 0070:f111, board: Hauppauge WinTV-HVR2250 [card=8,insmod option] [ 6.372838] saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 47, latency: 0, mmio: 0xfe000000 [ 6.530496] saa7164_downloadfirmware() no first image [ 6.530505] saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw) [ 6.899014] saa7164_downloadfirmware() firmware read 4019072 bytes. [ 6.899017] saa7164_downloadfirmware() firmware loaded. [ 6.899022] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072 [ 6.899027] saa7164_downloadfirmware() FirmwareSize = 0x1fd6 [ 6.899028] saa7164_downloadfirmware() BSLSize = 0x0 [ 6.899029] saa7164_downloadfirmware() Reserved = 0x0 [ 6.899030] saa7164_downloadfirmware() Version = 0x1661c00 [ 13.650943] saa7164_downloadimage() Image downloaded, booting... [ 13.754950] saa7164_downloadimage() Image booted successfully. [ 16.395094] saa7164_downloadimage() Image downloaded, booting... [ 18.267203] saa7164_downloadimage() Image booted successfully. [ 18.316076] saa7164[0]: Warning: Unknown Hauppauge model #0 [ 18.316078] saa7164[0]: Hauppauge eeprom: model=0 [ 18.380192] saa7164_dvb_register() Frontend initialization failed [ 18.380195] saa7164_initdev() Failed to register dvb adapters on porta [ 18.383340] saa7164_api_i2c_read() error, ret(2) = 0x9 [ 18.383347] saa7164_dvb_register() Frontend initialization failed [ 18.383348] saa7164_initdev() Failed to register dvb adapters on portb [ 18.383411] saa7164[0]: registered device video0 [mpeg] [ 18.618462] saa7164[0]: registered device video1 [mpeg] [ 18.834041] saa7164[0]: registered device vbi0 [vbi] [ 18.834087] saa7164[0]: registered device vbi1 [vbi] [ 18.848471] Modules linked in: s5h1411 amdkfd amd_iommu_v2 kvm_amd
snd_hda_codec_realtekkvm radeonsnd_hda_codec_genericcrct10dif_pclmulcrc32_pclmulghash_clmulni_intelaesni_intelttmdrm_kms_helpersnd_hda_codec_hdmiaes_x86_64drmsnd_hda_intelsnd_hda_controllersaa7164i2c_algo_bitsnd_hda_codeceeepc_wmilrw gf128mul tveepromasus_wmiglue_helperdvb_coresparse_keymapsnd_hwdepv4l2_commonvideosnd_pcmmxm_wmisnd_seq_midisnd_seq_midi_eventablk_helpersnd_rawmidi videodevsnd_seqsnd_seq_devicemediasnd_timerwmi sndserio_rawsoundcore shpchp 8250_fintek cryptdfam15h_powerk 10tempedac_corei2c_piix4tpm_infineon- edited
/etc/modprobe.d/saa7164.conf
changed card=8 to card=7- rebooted again
dmesg | grep 7164
[ 0.000000] On node 0 totalpages: 2071641 [ 0.530051] pci 0000:05:00.0: [1131:7164] type 00 class 0x048000 [ 7.009868] saa7164 driver loaded [ 7.010007] CORE saa7164[0]: subsystem: 0070:f111, board: Hauppauge WinTV-HVR2250 [card=7,insmod option] [ 7.010010] saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 47, latency: 0, mmio: 0xfe000000 [ 7.178353] saa7164_downloadfirmware() no first image [ 7.178365] saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw) [ 7.561231] saa7164_downloadfirmware() firmware read 4019072 bytes. [ 7.561237] saa7164_downloadfirmware() firmware loaded. [ 7.561251] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072 [ 7.561258] saa7164_downloadfirmware() FirmwareSize = 0x1fd6 [ 7.561260] saa7164_downloadfirmware() BSLSize = 0x0 [ 7.561262] saa7164_downloadfirmware() Reserved = 0x0 [ 7.561264] saa7164_downloadfirmware() Version = 0x1661c00 [ 14.310760] saa7164_downloadimage() Image downloaded, booting... [ 14.414757] saa7164_downloadimage() Image booted successfully. [ 17.054898] saa7164_downloadimage() Image downloaded, booting... [ 18.927006] saa7164_downloadimage() Image booted successfully. [ 18.971706] tveeprom 10-0000: audio processor is SAA7164 (idx 43) [ 18.971707] tveeprom 10-0000: decoder processor is SAA7164 (idx 40) [ 18.971709] saa7164[0]: Warning: Unknown Hauppauge model #151061 [ 18.971711] saa7164[0]: Hauppauge eeprom: model=151061 [ 19.025745] saa7164_dvb_register() Frontend initialization failed [ 19.025748] saa7164_initdev() Failed to register dvb adapters on porta [ 19.028551] saa7164_dvb_register() Frontend initialization failed [ 19.028554] saa7164_initdev() Failed to register dvb adapters on portb [ 19.028614] saa7164[0]: registered device video0 [mpeg] [ 19.263763] saa7164[0]: registered device video1 [mpeg] [ 19.476734] saa7164[0]: registered device vbi0 [vbi] [ 19.476775] saa7164[0]: registered device vbi1 [vbi] [ 19.485472] Modules linked in: s5h1411 amdkfd amd_iommu_v2 radeon ttm
snd_hda_codec_realteksnd_hda_codec_genericdrm_kms_helpersnd_hda_codec_hdmisnd_hda_inteldrmsnd_hda_controllersnd_hda_codecsaa7164snd_hwdepkvm_amdsnd_pcmkvm tveepromdvb_coresnd_seq_midiv4l2_commonsnd_seq_midi_eventsnd_rawmidieeepc_wmicrct10dif_pclmulcrc32_pclmulasus_wmighash_clmulni_intelsnd_seqvideodevsparse_keymapmediasnd_seq_devicei2c_algo_bitaesni_intelsnd_timersnd videoaes_x86_64mxm_wmilrw gf128mulglue_helperablk_helperwmi soundcore k10temp cryptdedac_coreshpchptpm_infineon8250_ fintekserio_rawi2c_piix4fam15h_poweredac_mce_amdmac_hidparport_pcppdev lp parport autofs4hid_genericusbhid hidfirewire_ohcipsmousefirewire_coreahcicrc_itu_tr8169 libahci mii
Quoted 5 lines
Any help would be deeply appreciated.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 6 lines · Jeff Allen
I am trying to get the firmware to load on a fresh install of Ubuntu 15.04 desktop 64-bit on a new system.
uname -a
Linux 3.19.0-15-generic #15-Ubuntu SMP Thu Apr 16 23:32:37 UTC 2015x86_64x86_64x86_64GNU/Linux
That's not going to work. You need to pull tip, compile and install it for HVR2255 support.
No amount of specifying card=X on the module load fixes these kinds of issues.
Signature · 2 lines
Steven Toth - Kernel Labs http://www.kernellabs.com
Quoted 8 lines · Jeff Allen
Thanks, I did that and it is working now. However, I ran into another problem. The card will not scan any channels. I live in the Chicago area and my cable provider is Wowway. Wowway requires a main set top box and digital adapters for every other TV in the home. Cable ready TV's after 2010 are suppose to work without the need for a digital adapter. I have a feeling that the 2255 card I have will not work with my cable provider.
Any thoughts?
Cc'ing linux-media back in.
I'm not aware of any US cable provider that the HVR2255 cannot tune/demodulate. I'd be highly surprised if your HVR2255 isn't delivering packets, unless its faulty.
However, depending on your provider, those multiplexes may only contain encrypted tv channels - not watchable by you. I have a handful of channels from my provider that are watchable. 300+ are fully encrypted.... the data delivered by the card isn't that useful, for encrypted channels.
I suggest you share the output from your scan tests with the mailing list and see if anyone can help.
Signature · 2 lines
Steven Toth - Kernel Labs http://www.kernellabs.com