Question on corruption of host/guest vfp switch hyp function
I created a HYP function and call it from kvm_arch_vcpu_put().
It dies in restore_vfp_state right at the 'ldm' call.
Is the calling convention bad? Or anything else? vcpu structure is corrupted right after that instruction.
I expanded the restore_vfp_state macro below, without the ldm the guest boots (of course vfp restore is not complete).
I'm running this on FastModels 9.x
Thanks,
Mario
+ENTRY(__kvm_restore_host_vfp_state)
+ push {r3, r7}
+
+ mov r1, #0
+ str r1, [r0, #VCPU_VFP_SAVED]
+
+ VFPFMRX r1, FPEXC
+ push {r1}
+ orr r6, r2, #FPEXC_EN
+ VFPFMXR FPEXC, r6+
+ add r7, r0, #VCPU_VFP_GUEST
+ store_vfp_state r7
+
+ add r7, r0, #VCPU_VFP_HOST
+ ldr r7, [r7]
+ restore_vfp_state r7
+
+ pop {r1}
+ VFPFMXR FPEXC, r1
+ pop {r3, r7}
+ bx lr+ENDPROC(__kvm_restore_host_vfp_state)
+ LDC p11, cr0, [r7],#32*4 + MRC p10, 7, r6, cr7, cr0, 0 + and r6, r6, #(0xf << 0) + cmp r6, #2 + @ldceql p11, cr0, [r7],#32*4 + @addne r7, r7, #32*4 + @dsb + @sb
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Corruption here and dies <<<<<<<
+ ldm r7, {r2-r5}