Skip to contentSkip to conversation

ARM: dts: berlin: change BG2Q's USB PHY compatible

PATCH In review Thomas Hebb 1 participant 1 message Jul 2, 2015 Device tree bindings

lore
Share & tools
lore

Thomas Hebb

author
#0 lore raw

PATCH 2/4 ARM: dts: berlin: change BG2Q's USB PHY compatible

Currently, BG2Q shares a compatible with BG2. This is incorrect, since BG2 and BG2Q use different USB PLL dividers. In reality, BG2Q shares a divider with BG2CD. Change BG2Q's USB PHY compatible string to reflect that.

Signed-off-by Thomas Hebb <[email protected]>
---
 arch/arm/boot/dts/berlin2q.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm/boot/dts/berlin2q.dtsi +3 -3
index 63a4849..d4dbd28 100644
@@ -152,7 +152,7 @@
 		};
 
 		usb_phy2: phy at a2f400 {
-			compatible = "marvell,berlin2-usb-phy";
+			compatible = "marvell,berlin2cd-usb-phy";
 			reg = <0xa2f400 0x128>;
 			#phy-cells = <0>;
 			resets = <&chip_rst 0x104 14>;

@@ -170,7 +170,7 @@
 		};
 
 		usb_phy0: phy at b74000 {
-			compatible = "marvell,berlin2-usb-phy";
+			compatible = "marvell,berlin2cd-usb-phy";
 			reg = <0xb74000 0x128>;
 			#phy-cells = <0>;
 			resets = <&chip_rst 0x104 12>;

@@ -178,7 +178,7 @@
 		};
 
 		usb_phy1: phy at b78000 {
-			compatible = "marvell,berlin2-usb-phy";
+			compatible = "marvell,berlin2cd-usb-phy";
 			reg = <0xb78000 0x128>;
 			#phy-cells = <0>;
 			resets = <&chip_rst 0x104 13>;
Signature · 1 line
2.4.4