Skip to contentSkip to conversation

scsi: fix memory leak with scsi-mq

PATCH In review Tony Battersby 3 participants 3 messages Jul 16, 2015 – Jul 27, 2015 SCSI

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 scsi: fix memory leak with scsi-mq

Fix a memory leak with scsi-mq triggered by commands with large data transfer length.

__sg_alloc_table() sets both table->nents and table->orig_nents to the same value. When the scatterlist is DMA-mapped, table->nents is overwritten with the (possibly smaller) size of the DMA-mapped scatterlist, while table->orig_nents retains the original size of the allocated scatterlist. scsi_free_sgtable() should therefore check orig_nents instead of nents, and all code that initializes sdb->table without calling __sg_alloc_table() should set both nents and orig_nents.

Fixes d285203cf647 ("scsi: add support for a blk-mq based I/O path.")
Cc <[email protected]> # 3.17+

---

For immediate inclusion.

drivers/scsi/scsi_error.c +1 -1
index 106884a..cfadcce 100644
@@ -944,7 +944,7 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses,
 			    scmd->sdb.length);
 		scmd->sdb.table.sgl = &ses->sense_sgl;
 		scmd->sc_data_direction = DMA_FROM_DEVICE;
-		scmd->sdb.table.nents = 1;
+		scmd->sdb.table.nents = scmd->sdb.table.orig_nents = 1;
 		scmd->cmnd[0] = REQUEST_SENSE;
 		scmd->cmnd[4] = scmd->sdb.length;
 		scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
drivers/scsi/scsi_lib.c +3 -3
index b1a2631..448ebda 100644
@@ -583,7 +583,7 @@ static struct scatterlist *scsi_sg_alloc(unsigned int nents, gfp_t gfp_mask)
 
 static void scsi_free_sgtable(struct scsi_data_buffer *sdb, bool mq)
 {
-	if (mq && sdb->table.nents <= SCSI_MAX_SG_SEGMENTS)
+	if (mq && sdb->table.orig_nents <= SCSI_MAX_SG_SEGMENTS)
 		return;
 	__sg_free_table(&sdb->table, SCSI_MAX_SG_SEGMENTS, mq, scsi_sg_free);
 }
@@ -597,8 +597,8 @@ static int scsi_alloc_sgtable(struct scsi_data_buffer *sdb, int nents, bool mq)
 
 	if (mq) {
 		if (nents <= SCSI_MAX_SG_SEGMENTS) {
-			sdb->table.nents = nents;
-			sg_init_table(sdb->table.sgl, sdb->table.nents);
+			sdb->table.nents = sdb->table.orig_nents = nents;
+			sg_init_table(sdb->table.sgl, nents);
 			return 0;
 		}
 		first_chunk = sdb->table.sgl;
Reviewed-by on v1 1/1
#2 lore raw
In reply to Tony Battersby
Quoted 57 lines · Tony Battersby

Fix a memory leak with scsi-mq triggered by commands with large data transfer length.

__sg_alloc_table() sets both table->nents and table->orig_nents to the same value. When the scatterlist is DMA-mapped, table->nents is overwritten with the (possibly smaller) size of the DMA-mapped scatterlist, while table->orig_nents retains the original size of the allocated scatterlist. scsi_free_sgtable() should therefore check orig_nents instead of nents, and all code that initializes sdb->table without calling __sg_alloc_table() should set both nents and orig_nents.

Fixes d285203cf647 ("scsi: add support for a blk-mq based I/O path.")
Cc <[email protected]> # 3.17+

---

For immediate inclusion.

drivers/scsi/scsi_error.c +1 -1
index 106884a..cfadcce 100644
@@ -944,7 +944,7 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses,
 			    scmd->sdb.length);
 		scmd->sdb.table.sgl = &ses->sense_sgl;
 		scmd->sc_data_direction = DMA_FROM_DEVICE;
-		scmd->sdb.table.nents = 1;
+		scmd->sdb.table.nents = scmd->sdb.table.orig_nents = 1;
 		scmd->cmnd[0] = REQUEST_SENSE;
 		scmd->cmnd[4] = scmd->sdb.length;
 		scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
drivers/scsi/scsi_lib.c +3 -4
index b1a2631..448ebda 100644
@@ -583,7 +583,7 @@ static struct scatterlist *scsi_sg_alloc(unsigned int nents, gfp_t gfp_mask)
 
 static void scsi_free_sgtable(struct scsi_data_buffer *sdb, bool mq)
 {
-	if (mq && sdb->table.nents <= SCSI_MAX_SG_SEGMENTS)
+	if (mq && sdb->table.orig_nents <= SCSI_MAX_SG_SEGMENTS)
 		return;
 	__sg_free_table(&sdb->table, SCSI_MAX_SG_SEGMENTS, mq, scsi_sg_free);
 }
@@ -597,8 +597,8 @@ static int scsi_alloc_sgtable(struct scsi_data_buffer *sdb, int nents, bool mq)
 
 	if (mq) {
 		if (nents <= SCSI_MAX_SG_SEGMENTS) {
-			sdb->table.nents = nents;
-			sg_init_table(sdb->table.sgl, sdb->table.nents);
+			sdb->table.nents = sdb->table.orig_nents = nents;
+			sg_init_table(sdb->table.sgl, nents);
 			return 0;
 		}
 		first_chunk = sdb->table.sgl;
 
--
Quoted 3 lines

To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Looks good. James, can we get this in please?