New/unfamiliar messages
I just updated my Poky/Yocto + RaspberryPi layers and fired off
a build of an image I built a few weeks ago. Lo and behold, I
received a slew of messages I've not seen before, e.g.
NOTE: Stamp /home/local/rpi2_2015-03-05/tmp/stamps/i686-linux/file-native/5.22-r0 is not reachable, removing related manifests
NOTE: Stamp /home/local/rpi2_2015-03-05/tmp/stamps/i686-linux/elfutils-native/0.161-r0 is not reachable, removing related manifests
NOTE: Stamp /home/local/rpi2_2015-03-05/tmp/stamps/i686-linux/openssl-native/1.0.2a-r0 is not reachable, removing related manifests
NOTE: Stamp /home/local/rpi2_2015-03-05/tmp/stamps/i686-linux/xproto-native/1_7.0.27-r0 is not reachable, removing related manifests
NOTE: Stamp /home/local/rpi2_2015-03-05/tmp/stamps/i686-linux/perl-native/5.20.0-r0 is not reachable, removing related manifests
NOTE: Stamp /home/local/rpi2_2015-03-05/tmp/stamps/i686-linux/freetype-native/2.5.5-r0 is not reachable, removing related manifests
NOTE: Stamp /home/local/rpi2_2015-03-05/tmp/stamps/i686-linux/intltool-native/0.50.2-r0 is not reachable, removing related manifests
NOTE: Stamp /home/local/rpi2_2015-03-05/tmp/stamps/i686-linux/qemu-native/2.3.0-r1 is not reachable, removing related manifests
NOTE: Stamp /home/local/rpi2_2015-03-05/tmp/stamps/i686-linux/dbus-native/1.8.16-r0 is not reachable, removing related manifests
... many more
What do these mean and should I be worried about seeing them?
Thanks
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Quoted 7 lines · Gary Thomas
NOTE: Stamp
/home/local/rpi2_2015-03-05/tmp/stamps/i686-linux/dbus-native/1.8.16-r0is not reachable, removing related manifests
... many moreWhat do these mean and should I be worried about seeing them?
That basically means that e.g. the dbus-native in the layers is newer than the version in the sysroot, so it is now removing dbus-native 1.8.16 from the sysroot so it can later install 1.8.<something newer>. Now this code has pretty much proven itself we can probably remove those messages.
Previously it just wrote over the top and hoped for the best, with logic to error out if one native recipe wrote over another recipe's files. This was good for determinism but bad for moving files between recipes or renaming recipes (which was impossible).
Ross
Quoted 6 lines · Ross
On 20 July 2015 at 16:28, Gary Thomas <[email protected] <mailto:[email protected]>> wrote:
NOTE: Stamp
/home/local/rpi2_2015-03-05/tmp/stamps/i686-linux/dbus-native/1.8.16-r0is not reachable, removing related manifests
... many more
Quoted 8 lines
What do these mean and should I be worried about seeing them?
That basically means that e.g. the dbus-native in the layers is newer than the version in the sysroot, so it is now removing dbus-native 1.8.16 from the sysroot so it can later install 1.8.<something newer>. Now this code has pretty much proven itself we can probably remove those messages.
Previously it just wrote over the top and hoped for the best, with logic to error out if one native recipe wrote over another recipe's files. This was good for determinism but bad for moving files between recipes or renaming recipes (which was impossible).
Thanks for the explanation. I can see that the code for this is fairly new (early June) and I must have not seen many of these so it grabbed my attention. The build tree in question was last touched in March, so there obviously were many cases of this situation.
Related query: I tend to build & rebuild in the same tree (typically only one platform per build tree) over long periods of time (like my RaspberryPi2 tree which I've had around for many months). Over time, there may be a lot of updated builds and I end up with many "duplicated" trees in my tmp/work (I don't use rm_work), e.g.
tmp/work/x86_64-linux/libfontenc-native/1_1.1.3-r0 tmp/work/x86_64-linux/libfontenc-native/1_1.1.2-r0 tmp/work/x86_64-linux/glib-2.0-native/1_2.44.1-r0 tmp/work/x86_64-linux/glib-2.0-native/1_2.44.0-r0
Is there a [simple] way to remove just the old/redundant trees?
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Quoted 2 lines · Gary Thomas
Is there a [simple] way to remove just the old/redundant trees?
Use rm_work? :) I believe there is a rm_old_work in meta-oe which may be what you're after.
Ross
Quoted 32 lines · Gary Thomas
Quoted 6 lines · Ross
On 20 July 2015 at 16:28, Gary Thomas <[email protected] <mailto:[email protected]>> wrote:
NOTE: Stamp
/home/local/rpi2_2015-03-05/tmp/stamps/i686-linux/dbus-native/1.8.16-r0is not reachable, removing related manifests
... many moreQuoted 8 lines
What do these mean and should I be worried about seeing them?
That basically means that e.g. the dbus-native in the layers is newer than the version in the sysroot, so it is now removing dbus-native 1.8.16 from the sysroot so it can later install 1.8.<something newer>. Now this code has pretty much proven itself we can probably remove those messages.
Previously it just wrote over the top and hoped for the best, with logic to error out if one native recipe wrote over another recipe's files. This was good for determinism but bad for moving files between recipes or renaming recipes (which was impossible).
Thanks for the explanation. I can see that the code for this is fairly new (early June) and I must have not seen many of these so it grabbed my attention. The build tree in question was last touched in March, so there obviously were many cases of this situation.
Related query: I tend to build & rebuild in the same tree (typically only one platform per build tree) over long periods of time (like my RaspberryPi2 tree which I've had around for many months). Over time, there may be a lot of updated builds and I end up with many "duplicated" trees in my tmp/work (I don't use
rm_work), e.g.
tmp/work/x86_64-linux/libfontenc-native/1_1.1.3-r0 tmp/work/x86_64-linux/libfontenc-native/1_1.1.2-r0 tmp/work/x86_64-linux/glib-2.0-native/1_2.44.1-r0 tmp/work/x86_64-linux/glib-2.0-native/1_2.44.0-r0
Quoted 1 line
Is there a [simple] way to remove just the old/redundant trees?
The code you're talking about above now does this (without rm_work)!
Cheers,
Richard
Quoted 33 lines · Richard Purdie
Quoted 32 lines · Gary Thomas
Quoted 6 lines · Ross
On 20 July 2015 at 16:28, Gary Thomas <[email protected] <mailto:[email protected]>> wrote:
NOTE: Stamp
/home/local/rpi2_2015-03-05/tmp/stamps/i686-linux/dbus-native/1.8.16-r0is not reachable, removing related manifests
... many moreQuoted 8 lines
What do these mean and should I be worried about seeing them?
That basically means that e.g. the dbus-native in the layers is newer than the version in the sysroot, so it is now removing dbus-native 1.8.16 from the sysroot so it can later install 1.8.<something newer>. Now this code has pretty much proven itself we can probably remove those messages.
Previously it just wrote over the top and hoped for the best, with logic to error out if one native recipe wrote over another recipe's files. This was good for determinism but bad for moving files between recipes or renaming recipes (which was impossible).
Thanks for the explanation. I can see that the code for this is fairly new (early June) and I must have not seen many of these so it grabbed my attention. The build tree in question was last touched in March, so there obviously were many cases of this situation.
Related query: I tend to build & rebuild in the same tree (typically only one platform per build tree) over long periods of time (like my RaspberryPi2 tree which I've had around for many months). Over time, there may be a lot of updated builds and I end up with many "duplicated" trees in my tmp/work (I don't use
rm_work), e.g.tmp/work/x86_64-linux/libfontenc-native/1_1.1.3-r0 tmp/work/x86_64-linux/libfontenc-native/1_1.1.2-r0 tmp/work/x86_64-linux/glib-2.0-native/1_2.44.1-r0 tmp/work/x86_64-linux/glib-2.0-native/1_2.44.0-r0
Quoted 3 lines
Quoted 1 line
Is there a [simple] way to remove just the old/redundant trees?
The code you're talking about above now does this (without
rm_work)!
Interesting - why then do I still have redundant (tmp/work/...) trees?
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Quoted 35 lines · Gary Thomas
Quoted 34 lines · Richard Purdie
Quoted 33 lines · Gary Thomas
Quoted 9 lines · Ross
On 20 July 2015 at 16:28, Gary Thomas <[email protected] <mailto:[email protected]>> wrote:
NOTE: Stamp
/home/local/rpi2_2015-03-05/tmp/stamps/i686-linux/dbus-native/1.8.16-r0is not reachable, removing related manifests
... many moreWhat do these mean and should I be worried about seeing them?
Quoted 6 lines
That basically means that e.g. the dbus-native in the layers is newer than the version in the sysroot, so it is now removing dbus-native 1.8.16 from the sysroot so it can later install 1.8.<something newer>. Now this code has pretty much proven itself we can probably remove those messages.
Previously it just wrote over the top and hoped for the best, with logic to error out if one native recipe wrote over another recipe's files. This was good for determinism but bad
for moving files between recipes or renaming recipes (which was impossible).Thanks for the explanation. I can see that the code for this is fairly new (early June) and I must have not seen many of these so it grabbed my attention. The build tree in question was last touched in March, so there obviously were many cases of this situation.
Related query: I tend to build & rebuild in the same tree (typically only one platform per build tree) over long periods of time (like my RaspberryPi2 tree which I've had around for many months). Over time, there may be a lot of updated builds and I end up with many "duplicated" trees in my tmp/work (I don't use
rm_work), e.g.tmp/work/x86_64-linux/libfontenc-native/1_1.1.3-r0 tmp/work/x86_64-linux/libfontenc-native/1_1.1.2-r0 tmp/work/x86_64-linux/glib-2.0-native/1_2.44.1-r0 tmp/work/x86_64-linux/glib-2.0-native/1_2.44.0-r0
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
Is there a [simple] way to remove just the old/redundant trees?
The code you're talking about above now does this (without
rm_work)!Interesting - why then do I still have redundant (tmp/work/...) trees?
Answering my own question; I assume this is because I may have some build artifacts from other images I may have built in this tree and the messages (and removal) only apply to the image(s) I built today?
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Quoted 38 lines · Gary Thomas
Quoted 37 lines · Gary Thomas
Quoted 36 lines · Richard Purdie
Quoted 34 lines · Gary Thomas
Quoted 9 lines · Ross
On 20 July 2015 at 16:28, Gary Thomas <[email protected] <mailto:[email protected]>> wrote:
NOTE: Stamp
/home/local/rpi2_2015-03-05/tmp/stamps/i686-linux/dbus-native/1.8.16-r0is not reachable, removing related manifests
... many moreWhat do these mean and should I be worried about seeing them?
Quoted 6 lines
That basically means that e.g. the dbus-native in the layers is newer than the version in the sysroot, so it is now removing dbus-native 1.8.16 from the sysroot so it can later install 1.8.<something newer>. Now this code has pretty much proven itself we can probably remove those messages.
Previously it just wrote over the top and hoped for the best, with logic to error out if one native recipe wrote over another recipe's files. This was good for determinism but bad
for moving files between recipes or renaming recipes (which was impossible).Thanks for the explanation. I can see that the code for this is fairly new (early June) and I must have not seen many of these so it grabbed my attention. The build tree in question was last touched in March, so there obviously were many cases of this situation.
Related query: I tend to build & rebuild in the same tree (typically only one platform per build tree) over long periods of time (like my RaspberryPi2 tree which I've had around for many months). Over time, there may be a lot of updated builds and I end up with many "duplicated" trees in my tmp/work (I don't use
rm_work), e.g.tmp/work/x86_64-linux/libfontenc-native/1_1.1.3-r0 tmp/work/x86_64-linux/libfontenc-native/1_1.1.2-r0 tmp/work/x86_64-linux/glib-2.0-native/1_2.44.1-r0 tmp/work/x86_64-linux/glib-2.0-native/1_2.44.0-r0Is there a [simple] way to remove just the old/redundant trees?
Quoted 9 lines
Quoted 4 lines
Quoted 1 line
The code you're talking about above now does this (without
rm_work)!Interesting - why then do I still have redundant (tmp/work/...) trees?
Answering my own question; I assume this is because I may have some build artifacts from other images I may have built in this tree and the messages (and removal) only apply to the image(s) I built today?
Well that theory is blown up :-( I had in my tree:
drwxrwxr-x 8 gthomas gthomas 4096 May 28 11:29 tmp/work/x86_64-linux/yasm-native/1.2.0-r0 drwxrwxr-x 8 gthomas gthomas 4096 Jul 16 09:30 tmp/work/x86_64-linux/yasm-native/1.3.0-r0
So I thought I'd test my hypothesis by trying a build of yasm-native:
$ bitbake yasm-native NOTE: Started PRServer with DBfile: /local/p0382-cutting-edge_2014-11-21/cache/prserv.sqlite3, IP: 127.0.0.1, PORT: 56915, PID: 32139 Parsing recipes: 100% |##################################################################################| Time: 00:01:27 Parsing of 1323 .bb files complete (0 cached, 1323 parsed). 1763 targets, 97 skipped, 0 masked, 0 errors. NOTE: Stamp /local/p0382-cutting-edge_2014-11-21/tmp/stamps/x86_64-linux/qemu-native/2.3.0-r1 is not reachable, removing related manifests NOTE: Stamp /local/p0382-cutting-edge_2014-11-21/tmp/stamps/x86_64-linux/gtk-update-icon-cache-native/3.4.4-r0 is not reachable, removing related manifests NOTE: Stamp /local/p0382-cutting-edge_2014-11-21/tmp/stamps/cortexa9hf-vfp-neon-amltd-linux-gnueabi/speex/1.2rc1-r2 is not reachable, removing related manifests NOTE: Stamp /local/p0382-cutting-edge_2014-11-21/tmp/stamps/cortexa9hf-vfp-neon-mx6qdl-amltd-linux-gnueabi/libdrm/2.4.59-r0 is not reachable, removing related manifests NOTE: Resolving any missing task queue dependencies
Build Configuration:
BB_VERSION = "1.27.1" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "Ubuntu-13.10" TARGET_SYS = "arm-amltd-linux-gnueabi" MACHINE = "teton-p0382" DISTRO = "amltd" DISTRO_VERSION = "1.8+snapshot-20150720" TUNE_FEATURES = "arm armv7a vfp thumb neon callconvention-hard cortexa9" TARGET_FPU = "vfp-neon" meta = "cutting-edge:0f8d89ce66cfffccc9911d6c61470a585173b79d" meta-oe = "cutting-edge:bd2eab9d5b5fb0c030528aeba706f5a24429bf4f" meta-demos = "master:40d5e8595e6f2fffab978ef8f672512bc78563ba" meta-amltd = "cutting-edge:526a81399cd4e8212b73f697bb28ae9b7db91912" meta-teton-imx6-p0382 = "cutting-edge:3f8803e5822a8b55898f8194638e51a5ea1625b3" meta-fsl-arm = "cutting-edge:cf94bf962184cbc3d9c1ba7e2d6e8751eebfad77" meta-fsl-arm-extra = "cutting-edge:60398d3a0b1e5f18a5348fafede7dd3c58abfbac" meta-fsl-demos = "master:1ae8a2d8e9899f0182fa5227acc2b7b6c78039ff" meta-webserver = "master:788c2ed48b961935f8381cb2c4fe54d68602b05c" meta-browser = "cutting-edge:fdb555cdaa1ae090f97bf6ab9736e4c158509a92"
NOTE: Preparing RunQueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
NOTE: Tasks Summary: Attempted 65 tasks of which 8 didn't need to be rerun and all succeeded.
So some things got cleaned up, but not yasm-native:
$ ls tmp/work/x86_64-linux/yasm-native 1.2.0-r0 1.3.0-r0
I like the idea here, but it doesn't seem to be quite what I expect. Maybe I'm [still] missing the point a bit?
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Quoted 34 lines · Gary Thomas
Quoted 33 lines · Richard Purdie
Quoted 32 lines · Gary Thomas
Quoted 6 lines · Ross
On 20 July 2015 at 16:28, Gary Thomas <[email protected] <mailto:[email protected]>> wrote:
NOTE: Stamp
/home/local/rpi2_2015-03-05/tmp/stamps/i686-linux/dbus-native/1.8.16-r0is not reachable, removing related manifests
... many moreQuoted 8 lines
What do these mean and should I be worried about seeing them?
That basically means that e.g. the dbus-native in the layers is newer than the version in the sysroot, so it is now removing dbus-native 1.8.16 from the sysroot so it can later install 1.8.<something newer>. Now this code has pretty much proven itself we can probably remove those messages.
Previously it just wrote over the top and hoped for the best, with logic to error out if one native recipe wrote over another recipe's files. This was good for determinism but bad for moving files between recipes or renaming recipes (which was impossible).
Thanks for the explanation. I can see that the code for this is fairly new (early June) and I must have not seen many of these so it grabbed my attention. The build tree in question was last touched in March, so there obviously were many cases of this situation.
Related query: I tend to build & rebuild in the same tree (typically only one platform per build tree) over long periods of time (like my RaspberryPi2 tree which I've had around for many months). Over time, there may be a lot of updated builds and I end up with many "duplicated" trees in my tmp/work (I don't use
rm_work), e.g.tmp/work/x86_64-linux/libfontenc-native/1_1.1.3-r0 tmp/work/x86_64-linux/libfontenc-native/1_1.1.2-r0 tmp/work/x86_64-linux/glib-2.0-native/1_2.44.1-r0 tmp/work/x86_64-linux/glib-2.0-native/1_2.44.0-r0
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
Is there a [simple] way to remove just the old/redundant trees?
The code you're talking about above now does this (without
rm_work)!Interesting - why then do I still have redundant (tmp/work/...) trees?
They were from before the new code existed? It can only clean up the things it knows about from here forward, and only when a new version of something is built.
Cheers,
Richard