Skip to contentSkip to conversation

Two inodes with the same inode number

DISCUSSION Ross Lagerwall 1 participant 2 messages Sep 11, 2015 2 messages not in the archive

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

I have a setup with two hosts, A and B, both using a CIFS SMB 3.0 mount where the following operations take place (using 4.1 kernels):

A B
open X
close X
mv X Y
touch X
open X
open Y

After this, host A will have two dentries pointing to the same inode (or at least with the same inode number), which results in some 'interesting' behavior.

I've seen at least two failure modes:
1) Above, both open calls will try to use the same lease key, causing the server to fail the second open with STATUS_INVALID_PARAMETER. (the server was Windows Server 2012 R2)

2) The reported file size will be different depending on which filename was last used to refresh the inode attributes.

Although cifs_d_revalidate updates attributes such as the file size, it doesn't ever update the inode number. I tried making it return 0 to drop the cached inode if the inode number had changed but even still, opens failed occasionally with STATUS_INVALID_PARAMETER. Is there an alternate fix for this?

Thanks,

Signature · 1 line
Ross Lagerwall
#3 lore raw
In reply to a message not in the archive
Quoted 3 lines · On 09/11/2015 12:27 PM, john.jackson-hxIV5DHgdjlWk0Htik3J/[email protected]…

Peter, reading this person complaint regarding cifs further leads me to believe that the synology server may have problems managing inode numbers.

Just to be clear, my problem is on the client side since unmounting and remounting the share fixes the issue.

Thanks,

Signature · 1 line
Ross Lagerwall