Add devicetree bindings for Cirrus Logic CS4349
Subsystems (2)
PATCH 2/2 Add devicetree bindings for Cirrus Logic CS4349
From: Tim Howe <[email protected]>
Signed-off-by Tim Howe <[email protected]>
--- Documentation/devicetree/bindings/sound/cs4349.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/cs4349.txt
Documentation/devicetree/bindings/sound/cs4349.txt new file +19 -0
@@ -0,0 +1,19 @@ +CS4349 audio CODEC + +Required properties: + + - compatible : "cirrus,cs4349" + + - reg : the I2C address of the device for I2C + +Optional properties: + + - reset-gpios : a GPIO spec for the reset pin. + +Example: + +codec: cs4349@48 { + compatible = "cirrus,cs4349"; + reg = <0x48>; + reset-gpios = <&gpio 54 0>; +};
Signature · 1 line
2.4.5
Mark Brown
maintainerQuoted 3 lines · On Mon, Jul 13, 2015 at 03:08:44PM -0500, [email protected] wrote:
From: Tim Howe <[email protected]>
Signed-off-by Tim Howe <[email protected]>
Ah, the binding is here. Normally the binding comes before the code or in the same patch. This looks good.