Skip to contentSkip to conversation

bitbake error

DISCUSSION Gary Thomas 2 participants 5 messages Sep 21, 2015

lore
Share & tools
lore
#0 lore raw

When trying to build using latest Poky/Yocto master (7b86c771c80d0759c2ca0e57c46c4c966f89c49e) I'm getting this error:

=================================================================================================
Build Configuration:

BB_VERSION        = "1.27.1"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Ubuntu-15.04"
TARGET_SYS        = "arm-amltd-linux-gnueabi"
MACHINE           = "teton-p0382"
DISTRO            = "amltd"
DISTRO_VERSION    = "1.8+snapshot-20150921"
TUNE_FEATURES     = "arm armv7a vfp thumb neon callconvention-hard cortexa9"
TARGET_FPU        = "vfp-neon"
meta              = "master:7b86c771c80d0759c2ca0e57c46c4c966f89c49e"

ERROR: Error executing a python function in /local/poky-cutting-edge/meta/recipes-devtools/quilt/quilt-native_0.64.bb:

The stack trace of python calls that resulted in this exception/failure was:
File: 'relocatable_binaries_preprocess', lineno: 6, function: <module>

     0002:def relocatable_binaries_preprocess(d):
     0003:    rpath_replace(d.expand('/local/p0382-cutting-edge_2014-11-21/tmp/work/x86_64-linux/quilt-native/0.64-r0/sysroot-destdir/'), d)
     0004:
     0005:
 *** 0006:relocatable_binaries_preprocess(d)
     0007:
File: 'relocatable_binaries_preprocess', lineno: 3, function: relocatable_binaries_preprocess
     0001:
     0002:def relocatable_binaries_preprocess(d):
 *** 0003:    rpath_replace(d.expand('/local/p0382-cutting-edge_2014-11-21/tmp/work/x86_64-linux/quilt-native/0.64-r0/sysroot-destdir/'), d)
     0004:
     0005:
     0006:relocatable_binaries_preprocess(d)
     0007:

File: 'chrpath.bbclass', lineno: 7, function: rpath_replace
0003:
0004: for bindir in bindirs:
0005: #bb.note ("Processing directory " + bindir)
0006: directory = path + "/" + bindir
*** 0007: process_dir (path, directory, d)

     0008:

File: 'chrpath.bbclass', lineno: 44, function: process_dir
0040: perms = None
0041: else:
0042: # Temporarily make the file writeable so we can chrpath it
0043: os.chmod(fpath, perms|stat.S_IRWXU)
*** 0044: process_file(cmd, fpath, rootdir, baseprefix, tmpdir, d)
0045:
0046: if perms:
0047: os.chmod(fpath, perms)
0048:
File: 'chrpath.bbclass', lineno: 4, function: process_file_linux
0001:def process_file_linux(cmd, fpath, rootdir, baseprefix, tmpdir, d):
0002: import subprocess as sub
0003:

 *** 0004:    p = sub.Popen([cmd, '-l', fpath],stdout=sub.PIPE,stderr=sub.PIPE)
     0005:    err, out = p.communicate()
     0006:    # If returned succesfully, process stderr for results
     0007:    if p.returncode != 0:
     0008:        return
File: '/usr/lib/python2.7/subprocess.py', lineno: 710, function: __init__
     0706:                                cwd, env, universal_newlines,
     0707:                                startupinfo, creationflags, shell, to_close,
     0708:                                p2cread, p2cwrite,
     0709:                                c2pread, c2pwrite,
 *** 0710:                                errread, errwrite)

0711: except Exception:
0712: # Preserve original exception in case os.close raises.
0713: exc_type, exc_value, exc_trace = sys.exc_info()
0714:
File: '/usr/lib/python2.7/subprocess.py', lineno: 1335, function: _execute_child
1331: except OSError as e:
1332: if e.errno != errno.ECHILD:
1333: raise
1334: child_exception = pickle.loads(data)
*** 1335: raise child_exception
1336:
1337:
1338: def _handle_exitstatus(self, sts, _WIFSIGNALED=os.WIFSIGNALED,
1339: _WTERMSIG=os.WTERMSIG, _WIFEXITED=os.WIFEXITED,
Exception: OSError: [Errno 2] No such file or directory

ERROR: Function failed: relocatable_binaries_preprocess
ERROR: Logfile of failure stored in: /local/p0382-cutting-edge_2014-11-21/tmp/work/x86_64-linux/quilt-native/0.64-r0/temp/log.do_populate_sysroot.12966
ERROR: Task 11 (/local/poky-cutting-edge/meta/recipes-devtools/quilt/quilt-native_0.64.bb, do_populate_sysroot) failed with exit code '1'
=================================================================================================

Sadly, I don't see enough info in this error trace to really tell me what file/directory is missing (i.e. what the real problem is)

I tried 'bitbake quilt-native -c cleanstate', but the problem persists. Note that this is a build in a older tree, one which I've been using successfully (as you can tell) since late 2014.

Interestingly, I can build using the same meta-data on a different build box!

I get the same error when using a totally fresh tree, so I'm really perplexed by this one...

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#1 lore raw
Quoted 102 lines · On Monday 21 September 2015 07:10:00 Gary Thomas wrote:

When trying to build using latest Poky/Yocto master (7b86c771c80d0759c2ca0e57c46c4c966f89c49e) I'm getting this error:

============================================================================
===================== Build Configuration:

BB_VERSION        = "1.27.1"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Ubuntu-15.04"
TARGET_SYS        = "arm-amltd-linux-gnueabi"
MACHINE           = "teton-p0382"
DISTRO            = "amltd"
DISTRO_VERSION    = "1.8+snapshot-20150921"
TUNE_FEATURES     = "arm armv7a vfp thumb neon callconvention-hard cortexa9"
TARGET_FPU        = "vfp-neon"
meta              = "master:7b86c771c80d0759c2ca0e57c46c4c966f89c49e"

ERROR: Error executing a python function in /local/poky-cutting-edge/meta/recipes-devtools/quilt/quilt-native_0.64.bb:

The stack trace of python calls that resulted in this exception/failure was:
File: 'relocatable_binaries_preprocess', lineno: 6, function: <module> 0002:def relocatable_binaries_preprocess(d):

      0003:   
rpath_replace(d.expand('/local/p0382-cutting-edge_2014-11-21/tmp/work/x86_6
4-linux/quilt-native/0.64-r0/sysroot-destdir/'), d) 0004:
      0005:
  *** 0006:relocatable_binaries_preprocess(d)
      0007:

File: 'relocatable_binaries_preprocess', lineno: 3, function:
relocatable_binaries_preprocess 0001:
0002:def relocatable_binaries_preprocess(d):
*** 0003:
rpath_replace(d.expand('/local/p0382-cutting-edge_2014-11-21/tmp/work/x86_6 4-linux/quilt-native/0.64-r0/sysroot-destdir/'), d) 0004:

      0005:
      0006:relocatable_binaries_preprocess(d)
      0007:

File: 'chrpath.bbclass', lineno: 7, function: rpath_replace
0003:
0004: for bindir in bindirs:
0005: #bb.note ("Processing directory " + bindir)
0006: directory = path + "/" + bindir
*** 0007: process_dir (path, directory, d)

      0008:

File: 'chrpath.bbclass', lineno: 44, function: process_dir
0040: perms = None
0041: else:
0042: # Temporarily make the file writeable so we can
chrpath it 0043: os.chmod(fpath, perms|stat.S_IRWXU)
*** 0044: process_file(cmd, fpath, rootdir, baseprefix, tmpdir,
d) 0045:
0046: if perms:
0047: os.chmod(fpath, perms)
0048:
File: 'chrpath.bbclass', lineno: 4, function: process_file_linux
0001:def process_file_linux(cmd, fpath, rootdir, baseprefix, tmpdir,
d): 0002: import subprocess as sub

      0003:
  *** 0004:    p = sub.Popen([cmd, '-l',
fpath],stdout=sub.PIPE,stderr=sub.PIPE) 0005:    err, out = p.communicate()
      0006:    # If returned succesfully, process stderr for results
      0007:    if p.returncode != 0:
      0008:        return

File: '/usr/lib/python2.7/subprocess.py', lineno: 710, function: __init__
0706: cwd, env, universal_newlines,
0707: startupinfo, creationflags,
shell, to_close, 0708: p2cread, p2cwrite,
0709: c2pread, c2pwrite,
*** 0710: errread, errwrite)
0711: except Exception:
0712: # Preserve original exception in case os.close
raises. 0713: exc_type, exc_value, exc_trace = sys.exc_info()
0714:
File: '/usr/lib/python2.7/subprocess.py', lineno: 1335, function:
_execute_child 1331: except OSError as e:
1332: if e.errno != errno.ECHILD:
1333: raise
1334: child_exception = pickle.loads(data)
*** 1335: raise child_exception

      1336:
      1337:
      1338:        def _handle_exitstatus(self, sts,

_WIFSIGNALED=os.WIFSIGNALED, 1339: _WTERMSIG=os.WTERMSIG,
_WIFEXITED=os.WIFEXITED, Exception: OSError: [Errno 2] No such file or directory

ERROR: Function failed: relocatable_binaries_preprocess
ERROR: Logfile of failure stored in:
/local/p0382-cutting-edge_2014-11-21/tmp/work/x86_64-linux/quilt-native/0.6 4-r0/temp/log.do_populate_sysroot.12966 ERROR: Task 11 (/local/poky-cutting-edge/meta/recipes-devtools/quilt/quilt-native_0.64.bb, do_populate_sysroot) failed with exit code '1'
===========================================================================
======================

Sadly, I don't see enough info in this error trace to really tell me what file/directory is missing (i.e. what the real problem is)

I tried 'bitbake quilt-native -c cleanstate', but the problem persists. Note that this is a build in a older tree, one which I've been using successfully (as you can tell) since late 2014.

Quoted 5 lines

Interestingly, I can build using the same meta-data on a different build box!

I get the same error when using a totally fresh tree, so I'm really perplexed by this one...

I believe this code is trying to run chrpath - do you have that installed on the host where it's failing?

Cheers,
Paul

Signature · 2 lines
Paul Eggleton
Intel Open Source Technology Centre
#2 lore raw
Quoted 103 lines · Paul Eggleton
Quoted 102 lines · On Monday 21 September 2015 07:10:00 Gary Thomas wrote:

When trying to build using latest Poky/Yocto master (7b86c771c80d0759c2ca0e57c46c4c966f89c49e) I'm getting this error:

============================================================================
===================== Build Configuration:

BB_VERSION        = "1.27.1"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Ubuntu-15.04"
TARGET_SYS        = "arm-amltd-linux-gnueabi"
MACHINE           = "teton-p0382"
DISTRO            = "amltd"
DISTRO_VERSION    = "1.8+snapshot-20150921"
TUNE_FEATURES     = "arm armv7a vfp thumb neon callconvention-hard cortexa9"
TARGET_FPU        = "vfp-neon"
meta              = "master:7b86c771c80d0759c2ca0e57c46c4c966f89c49e"

ERROR: Error executing a python function in /local/poky-cutting-edge/meta/recipes-devtools/quilt/quilt-native_0.64.bb:

The stack trace of python calls that resulted in this exception/failure was:
File: 'relocatable_binaries_preprocess', lineno: 6, function: <module> 0002:def relocatable_binaries_preprocess(d):

       0003:
rpath_replace(d.expand('/local/p0382-cutting-edge_2014-11-21/tmp/work/x86_6
4-linux/quilt-native/0.64-r0/sysroot-destdir/'), d) 0004:
       0005:
   *** 0006:relocatable_binaries_preprocess(d)
       0007:
File: 'relocatable_binaries_preprocess', lineno: 3, function:
relocatable_binaries_preprocess 0001:
       0002:def relocatable_binaries_preprocess(d):
   *** 0003:
rpath_replace(d.expand('/local/p0382-cutting-edge_2014-11-21/tmp/work/x86_6
4-linux/quilt-native/0.64-r0/sysroot-destdir/'), d) 0004:
       0005:
       0006:relocatable_binaries_preprocess(d)
       0007:

File: 'chrpath.bbclass', lineno: 7, function: rpath_replace
0003:
0004: for bindir in bindirs:
0005: #bb.note ("Processing directory " + bindir)
0006: directory = path + "/" + bindir
*** 0007: process_dir (path, directory, d)

       0008:

File: 'chrpath.bbclass', lineno: 44, function: process_dir
0040: perms = None
0041: else:
0042: # Temporarily make the file writeable so we can
chrpath it 0043: os.chmod(fpath, perms|stat.S_IRWXU)
*** 0044: process_file(cmd, fpath, rootdir, baseprefix, tmpdir,
d) 0045:
0046: if perms:
0047: os.chmod(fpath, perms)
0048:
File: 'chrpath.bbclass', lineno: 4, function: process_file_linux
0001:def process_file_linux(cmd, fpath, rootdir, baseprefix, tmpdir,
d): 0002: import subprocess as sub

       0003:
   *** 0004:    p = sub.Popen([cmd, '-l',
fpath],stdout=sub.PIPE,stderr=sub.PIPE) 0005:    err, out = p.communicate()
       0006:    # If returned succesfully, process stderr for results
       0007:    if p.returncode != 0:
       0008:        return

File: '/usr/lib/python2.7/subprocess.py', lineno: 710, function: __init__
0706: cwd, env, universal_newlines,
0707: startupinfo, creationflags,
shell, to_close, 0708: p2cread, p2cwrite,
0709: c2pread, c2pwrite,
*** 0710: errread, errwrite)
0711: except Exception:
0712: # Preserve original exception in case os.close
raises. 0713: exc_type, exc_value, exc_trace = sys.exc_info()
0714:
File: '/usr/lib/python2.7/subprocess.py', lineno: 1335, function:
_execute_child 1331: except OSError as e:
1332: if e.errno != errno.ECHILD:
1333: raise
1334: child_exception = pickle.loads(data)
*** 1335: raise child_exception

       1336:
       1337:
       1338:        def _handle_exitstatus(self, sts,

_WIFSIGNALED=os.WIFSIGNALED, 1339: _WTERMSIG=os.WTERMSIG,
_WIFEXITED=os.WIFEXITED, Exception: OSError: [Errno 2] No such file or directory

ERROR: Function failed: relocatable_binaries_preprocess
ERROR: Logfile of failure stored in:
/local/p0382-cutting-edge_2014-11-21/tmp/work/x86_64-linux/quilt-native/0.6 4-r0/temp/log.do_populate_sysroot.12966 ERROR: Task 11 (/local/poky-cutting-edge/meta/recipes-devtools/quilt/quilt-native_0.64.bb, do_populate_sysroot) failed with exit code '1'
===========================================================================
======================

Sadly, I don't see enough info in this error trace to really tell me what file/directory is missing (i.e. what the real problem is)

I tried 'bitbake quilt-native -c cleanstate', but the problem persists. Note that this is a build in a older tree, one which I've been using successfully (as you can tell) since late 2014.

Quoted 8 lines
Quoted 5 lines

Interestingly, I can build using the same meta-data on a different build box!

I get the same error when using a totally fresh tree, so I'm really perplexed by this one...

I believe this code is trying to run chrpath - do you have that installed on the host where it's failing?

Yes (or at least I USED TO!)

I've done some more digging and it seems that this build machine (where this error happened) has been totally eaten (corrupted) :-( My home directory (and who knows what else?) is empty. I'm going to blame it on my attempt to try out OpenWRT builds on this box (not my choice - customers seem to always get in the way)

Sorry for the noise - I'll go back to trying to repair my build machine now

BTW, how did you come to the conclusion about chrpath?

Thanks for the help

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#3 lore raw
Quoted 153 lines · On Monday 21 September 2015 07:55:35 Gary Thomas wrote:
Quoted 143 lines · Paul Eggleton
Quoted 142 lines · On Monday 21 September 2015 07:10:00 Gary Thomas wrote:

When trying to build using latest Poky/Yocto master (7b86c771c80d0759c2ca0e57c46c4c966f89c49e) I'm getting this error:

=========================================================================
=== ===================== Build Configuration:

BB_VERSION        = "1.27.1"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Ubuntu-15.04"
TARGET_SYS        = "arm-amltd-linux-gnueabi"
MACHINE           = "teton-p0382"
DISTRO            = "amltd"
DISTRO_VERSION    = "1.8+snapshot-20150921"
TUNE_FEATURES     = "arm armv7a vfp thumb neon callconvention-hard

cortexa9" TARGET_FPU = "vfp-neon"
meta = "master:7b86c771c80d0759c2ca0e57c46c4c966f89c49e"

ERROR: Error executing a python function in /local/poky-cutting-edge/meta/recipes-devtools/quilt/quilt-native_0.64.bb :

The stack trace of python calls that resulted in this exception/failure
was: File: 'relocatable_binaries_preprocess', lineno: 6, function:
<module>>>
0002:def relocatable_binaries_preprocess(d):

       0003:

rpath_replace(d.expand('/local/p0382-cutting-edge_2014-11-21/tmp/work/x86 _6

4-linux/quilt-native/0.64-r0/sysroot-destdir/'), d) 0004:

       0005:
   *** 0006:relocatable_binaries_preprocess(d)
   
       0007:

File: 'relocatable_binaries_preprocess', lineno: 3, function:

relocatable_binaries_preprocess 0001:
0002:def relocatable_binaries_preprocess(d):

   *** 0003:

rpath_replace(d.expand('/local/p0382-cutting-edge_2014-11-21/tmp/work/x86 _6

4-linux/quilt-native/0.64-r0/sysroot-destdir/'), d) 0004:

       0005:
       0006:relocatable_binaries_preprocess(d)

       0007:

File: 'chrpath.bbclass', lineno: 7, function: rpath_replace

0003:
0004: for bindir in bindirs:
0005: #bb.note ("Processing directory " + bindir)
0006: directory = path + "/" + bindir

   *** 0007:        process_dir (path, directory, d)
   
       0008:

File: 'chrpath.bbclass', lineno: 44, function: process_dir

0040: perms = None
0041: else:
0042: # Temporarily make the file writeable so we
can

chrpath it 0043: os.chmod(fpath, perms|stat.S_IRWXU)

*** 0044: process_file(cmd, fpath, rootdir, baseprefix,
tmpdir,

d) 0045:
0046: if perms:
0047: os.chmod(fpath, perms)

0048:
File: 'chrpath.bbclass', lineno: 4, function: process_file_linux

0001:def process_file_linux(cmd, fpath, rootdir, baseprefix, tmpdir,

d): 0002: import subprocess as sub

       0003:
   *** 0004:    p = sub.Popen([cmd, '-l',

fpath],stdout=sub.PIPE,stderr=sub.PIPE) 0005: err, out =
p.communicate()

       0006:    # If returned succesfully, process stderr for results
       0007:    if p.returncode != 0:
       0008:        return

File: '/usr/lib/python2.7/subprocess.py', lineno: 710, function: __init__

0706: cwd, env, universal_newlines,
0707: startupinfo, creationflags,

shell, to_close, 0708: p2cread, p2cwrite,

0709: c2pread, c2pwrite,

*** 0710: errread, errwrite)

0711: except Exception:
0712: # Preserve original exception in case os.close

raises. 0713: exc_type, exc_value, exc_trace = sys.exc_info()
0714:
File: '/usr/lib/python2.7/subprocess.py', lineno: 1335, function:

_execute_child 1331: except OSError as e:
1332: if e.errno != errno.ECHILD:
1333: raise
1334: child_exception = pickle.loads(data)

*** 1335: raise child_exception

       1336:
       1337:
       1338:        def _handle_exitstatus(self, sts,

_WIFSIGNALED=os.WIFSIGNALED, 1339: _WTERMSIG=os.WTERMSIG,
_WIFEXITED=os.WIFEXITED, Exception: OSError: [Errno 2] No such file or directory

ERROR: Function failed: relocatable_binaries_preprocess
ERROR: Logfile of failure stored in:
/local/p0382-cutting-edge_2014-11-21/tmp/work/x86_64-linux/quilt-native/0 .6
4-r0/temp/log.do_populate_sysroot.12966 ERROR: Task 11 (/local/poky-cutting-edge/meta/recipes-devtools/quilt/quilt-native_0.64.b b,
do_populate_sysroot) failed with exit code '1'
=========================================================================
==
======================

Sadly, I don't see enough info in this error trace to really tell me what file/directory is missing (i.e. what the real problem is)

I tried 'bitbake quilt-native -c cleanstate', but the problem persists. Note that this is a build in a older tree, one which I've been using successfully (as you can tell) since late 2014.

Quoted 8 lines
Quoted 5 lines

Interestingly, I can build using the same meta-data on a different build box!

I get the same error when using a totally fresh tree, so I'm really perplexed by this one...

I believe this code is trying to run chrpath - do you have that installed on the host where it's failing?

Quoted 7 lines

Yes (or at least I USED TO!)

I've done some more digging and it seems that this build machine (where this error happened) has been totally eaten (corrupted) :-( My home directory (and who knows what else?) is empty. I'm going to blame it on my attempt to try out OpenWRT builds on this box (not my choice - customers seem to always get in the way)

Hmm, that doesn't sound good.

Just as a check, you didn't by any chance try to use the subpath= option with a value that has a trailing '/' using an older version of bitbake did you?

Quoted 1 line

BTW, how did you come to the conclusion about chrpath?

According to the stack trace the error happened in a part of the code that uses chrpath to adjust the rpath in binaries, and I know that subprocess.Popen() will raise "No such file or directory" exception if it can't find the chrpath binary. We do have a check to ensure chrpath is installed as part of the sanity tests at startup - except IIRC if that check has been run before it won't be run again unless you delete build/conf/sanity_info.

Cheers,
Paul

Signature · 2 lines
Paul Eggleton
Intel Open Source Technology Centre
#4 lore raw

Sorry for the dups - I forgot to CC the list.

Quoted 162 lines · Paul Eggleton
Quoted 153 lines · On Monday 21 September 2015 07:55:35 Gary Thomas wrote:
Quoted 143 lines · Paul Eggleton
Quoted 142 lines · On Monday 21 September 2015 07:10:00 Gary Thomas wrote:

When trying to build using latest Poky/Yocto master (7b86c771c80d0759c2ca0e57c46c4c966f89c49e) I'm getting this error:

=========================================================================
=== ===================== Build Configuration:

BB_VERSION        = "1.27.1"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Ubuntu-15.04"
TARGET_SYS        = "arm-amltd-linux-gnueabi"
MACHINE           = "teton-p0382"
DISTRO            = "amltd"
DISTRO_VERSION    = "1.8+snapshot-20150921"
TUNE_FEATURES     = "arm armv7a vfp thumb neon callconvention-hard

cortexa9" TARGET_FPU = "vfp-neon"
meta = "master:7b86c771c80d0759c2ca0e57c46c4c966f89c49e"

ERROR: Error executing a python function in /local/poky-cutting-edge/meta/recipes-devtools/quilt/quilt-native_0.64.bb :

The stack trace of python calls that resulted in this exception/failure
was: File: 'relocatable_binaries_preprocess', lineno: 6, function:
<module>>>
0002:def relocatable_binaries_preprocess(d):

        0003:

rpath_replace(d.expand('/local/p0382-cutting-edge_2014-11-21/tmp/work/x86 _6

4-linux/quilt-native/0.64-r0/sysroot-destdir/'), d) 0004:

        0005:
    *** 0006:relocatable_binaries_preprocess(d)

        0007:

File: 'relocatable_binaries_preprocess', lineno: 3, function:

relocatable_binaries_preprocess 0001:

        0002:def relocatable_binaries_preprocess(d):
    *** 0003:

rpath_replace(d.expand('/local/p0382-cutting-edge_2014-11-21/tmp/work/x86 _6

4-linux/quilt-native/0.64-r0/sysroot-destdir/'), d) 0004:

        0005:
        0006:relocatable_binaries_preprocess(d)

        0007:

File: 'chrpath.bbclass', lineno: 7, function: rpath_replace

0003:
0004: for bindir in bindirs:
0005: #bb.note ("Processing directory " + bindir)
0006: directory = path + "/" + bindir

*** 0007: process_dir (path, directory, d)

0008:
File: 'chrpath.bbclass', lineno: 44, function: process_dir

0040: perms = None
0041: else:
0042: # Temporarily make the file writeable so we
can

chrpath it 0043: os.chmod(fpath, perms|stat.S_IRWXU)

*** 0044: process_file(cmd, fpath, rootdir, baseprefix,
tmpdir,

d) 0045:
0046: if perms:
0047: os.chmod(fpath, perms)

0048:
File: 'chrpath.bbclass', lineno: 4, function: process_file_linux

0001:def process_file_linux(cmd, fpath, rootdir, baseprefix, tmpdir,

d): 0002: import subprocess as sub

        0003:
    *** 0004:    p = sub.Popen([cmd, '-l',

fpath],stdout=sub.PIPE,stderr=sub.PIPE) 0005: err, out =
p.communicate()

        0006:    # If returned succesfully, process stderr for results
        0007:    if p.returncode != 0:
        0008:        return

File: '/usr/lib/python2.7/subprocess.py', lineno: 710, function: __init__

0706: cwd, env, universal_newlines,
0707: startupinfo, creationflags,

shell, to_close, 0708: p2cread, p2cwrite,

0709: c2pread, c2pwrite,

*** 0710: errread, errwrite)

0711: except Exception:
0712: # Preserve original exception in case os.close

raises. 0713: exc_type, exc_value, exc_trace = sys.exc_info()
0714:
File: '/usr/lib/python2.7/subprocess.py', lineno: 1335, function:

_execute_child 1331: except OSError as e:
1332: if e.errno != errno.ECHILD:
1333: raise
1334: child_exception = pickle.loads(data)

*** 1335: raise child_exception

1336:
1337:
1338: def _handle_exitstatus(self, sts,

_WIFSIGNALED=os.WIFSIGNALED, 1339: _WTERMSIG=os.WTERMSIG,
_WIFEXITED=os.WIFEXITED, Exception: OSError: [Errno 2] No such file or directory

ERROR: Function failed: relocatable_binaries_preprocess
ERROR: Logfile of failure stored in:
/local/p0382-cutting-edge_2014-11-21/tmp/work/x86_64-linux/quilt-native/0 .6
4-r0/temp/log.do_populate_sysroot.12966 ERROR: Task 11 (/local/poky-cutting-edge/meta/recipes-devtools/quilt/quilt-native_0.64.b b,
do_populate_sysroot) failed with exit code '1'
=========================================================================
==
======================

Sadly, I don't see enough info in this error trace to really tell me what file/directory is missing (i.e. what the real problem is)

I tried 'bitbake quilt-native -c cleanstate', but the problem persists. Note that this is a build in a older tree, one which I've been using successfully (as you can tell) since late 2014.

Quoted 8 lines
Quoted 5 lines

Interestingly, I can build using the same meta-data on a different build box!

I get the same error when using a totally fresh tree, so I'm really perplexed by this one...

I believe this code is trying to run chrpath - do you have that installed on the host where it's failing?

Quoted 7 lines

Yes (or at least I USED TO!)

I've done some more digging and it seems that this build machine (where this error happened) has been totally eaten (corrupted) :-( My home directory (and who knows what else?) is empty. I'm going to blame it on my attempt to try out OpenWRT builds on this box (not my choice - customers seem to always get in the way)

Quoted 4 lines

Hmm, that doesn't sound good.

Just as a check, you didn't by any chance try to use the subpath= option with a value that has a trailing '/' using an older version of bitbake did you?

No. As I said, I've been using this machine (for years), always with the same processes, and never a problem until today.

Time to rebuild the machine from scratch

Quoted 9 lines
Quoted 2 lines

BTW, how did you come to the conclusion about chrpath?

According to the stack trace the error happened in a part of the code that uses chrpath to adjust the rpath in binaries, and I know that subprocess.Popen() will raise "No such file or directory" exception if it can't find the chrpath binary. We do have a check to ensure chrpath is installed as part of the sanity tests at startup - except IIRC if that check has been run before it won't be run again unless you delete build/conf/sanity_info.

Fair enough (and indeed the sanity check would have been skipped since that tree was initially built on 2014-11-21). Too bad errors (like this) couldn't be trapped a bit higher up to indicate what really failed, as opposed to a lengthy stack trace which isn't very useful, at least not to those not totally familiar with the code.

Thanks again

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------