Skip to contentSkip to conversation

Unhandled fault or spinlock lockup suspected ?

DISCUSSION Jean-Christian de Rivaz 3 participants 4 messages Sep 29, 2015

lore
Share & tools
lore
#0 lore raw

Hi,

I tried the last git linux master on a embedded system that worked with a 3.19.0 kernel before. I solved most of the problems caused by the kernel upgrade, but every 15 to 20 minutes I get this type of kernel report:

[ 1051.150000] Unhandled fault: page domain fault (0x81b) at 0x00088000
[ 1051.150000] pgd = da078000
[ 1051.150000] [00088000] *pgd=3c7b1831, *pte=2b37d34f, *ppte=2b37d83f
[ 1051.150000] Internal error: : 81b [#1] PREEMPT ARM
[ 1051.150000] Modules linked in: at91_adc brcmfmac brcmutil mkiss ax25 

ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack xt_TCPMSS xt_tcpudp iptable_filter ip_tables x_tables industrialio_triggered_buffer cdc_acm rtc_ab_eoz9_s3 [last unloaded: at91_adc]

[ 1051.150000] CPU: 0 PID: 1177 Comm: dbus-daemon Tainted: G W       
4.3.0-rc3+ #1
[ 1051.150000] Hardware name: Atmel SAMA5
[ 1051.150000] task: deaf07c0 ti: da006000 task.ti: da006000
[ 1051.150000] PC is at memcpy+0x50/0x330
[ 1051.150000] LR is at 0x2c277375
[ 1051.150000] pc : [<c02a64d0>]    lr : [<2c277375>] psr: a0010013
sp : da007c7c  ip : 42442f70  fp : da007cc4
[ 1051.150000] r10: 00000051  r9 : dea2b73d  r8 : 6f746b73
[ 1051.150000] r7 : 65646565  r6 : 72662f67  r5 : 726f2f27  r4 : 3d687461
[ 1051.150000] r3 : 702c2764  r2 : ffffffa5  r1 : dea2b718  r0 : 00088000
[ 1051.150000] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM 
Segment none
[ 1051.150000] Control: 10c53c7d  Table: 3a078059  DAC: 00000051
[ 1051.150000] Process dbus-daemon (pid: 1177, stack limit = 0xda006208)
[ 1051.150000] Stack: (0xda007c7c to 0xda008000)
[ 1051.150000] 7c60: 00000000
[ 1051.150000] 7c80: 00000000 00000000 dea2b73d 00088000 00088045 
c02b3f2c dc7b1220 dc7f1774
[ 1051.150000] 7ca0: da007cc4 da007f54 0000013d da007e48 00000000 
0000013d da007cd4 da007cc8
[ 1051.150000] 7cc0: c02b3fb0 c02b3df4 da007d0c da007cd8 c02b9a54 
c02b3f9c c01354f8 00000001
[ 1051.150000] 7ce0: da007cfc 00000000 0000013d 0000013d da007e04 
0000013d da007f54 de935880
[ 1051.150000] 7d00: da007d44 da007d10 c0449d94 c02b99d0 c0048200 
c05ee87c 00000000 0000013d
[ 1051.150000] 7d20: 00000000 dea8af4c da007e04 dea8b130 dea8aec0 
0000013d da007d5c da007d48
[ 1051.150000] 7d40: c04dbfe0 c0449d30 da007e04 de935880 da007dfc 
da007d60 c04dca50 c04dbfbc
[ 1051.150000] 7d60: 000000c3 c004d370 deaf07f0 c004d378 0000001b 
dea8b050 dea8b130 00000000
[ 1051.150000] 7d80: dea8b104 da007da8 00000000 00000001 00000000 
00000000 00000000 dedd2040
[ 1051.150000] 7da0: 40000040 00000800 00000000 00000000 00000000 
00000000 00000000 0000004c
[ 1051.150000] 7dc0: da007e04 da007dd0 c02b8670 c0124700 da007e48 
da007f4c 00000000 40000040
[ 1051.150000] 7de0: dedd2040 da007e88 bede1858 bede18d0 da007e2c 
da007e00 c04dce68 c04dc5e0
[ 1051.150000] 7e00: c043b9d4 c04dbfb0 dedd2040 da007f4c 00000000 
00000800 40000040 00000000
[ 1051.150000] 7e20: da007e3c da007e30 c0439c9c c04dce2c da007f34 
da007e40 c043bab4 c0439c88
[ 1051.150000] 7e40: 00000000 00000000 00087f08 00000800 00000001 
dc7ea940 00000040 00000000
[ 1051.150000] 7e60: 00000000 00000000 00000001 c05eb3c8 da007e8c 
c043af48 c04dbaa0 dedd2040
[ 1051.150000] 7e80: da007eac da007e90 c043af48 c04dbaac 00000000 
da162c4c da007ebc da007ea8
[ 1051.150000] 7ea0: c0048200 c05ee8b0 deb2f81c 60000013 deb2f7c0 
da007ef8 00000000 c05ee7a0
[ 1051.150000] 7ec0: deb2f814 c05ee7ac da007eec da007ed8 c05ee7ac 
c0046994 deb2f814 c0169828
[ 1051.150000] 7ee0: da007f2c da007ef0 c0169828 c05ec9d0 deb2f7c0 
c013ee4c 0000004c da007f48
[ 1051.150000] 7f00: da007f1c da007f10 c013ee4c bede18d0 dedd2040 
40000000 00000129 c00101a4
[ 1051.150000] 7f20: da006000 00000000 da007f94 da007f38 c043cb5c 
c043ba24 00000000 c00101a4
[ 1051.150000] 7f40: da006000 00000000 fffffff7 00000000 00000000 
00000000 00000000 00000800
[ 1051.150000] 7f60: da007e48 00000001 bede1858 0000004c 40000000 
00000000 c007466c 00000011
[ 1051.150000] 7f80: bede18d0 0007d2dc da007fa4 da007f98 c043cba0 
c043cb1c 00000000 da007fa8
[ 1051.150000] 7fa0: c000ffe0 c043cb94 00000011 bede18d0 00000011 
bede18d0 40000000 0000004c
[ 1051.150000] 7fc0: 00000011 bede18d0 0007d2dc 00000129 00000800 
00000044 00000000 bede1928
[ 1051.150000] 7fe0: 00000000 bede1854 000351b3 b6e449a6 40000030 
00000011 3fffd861 3fffdc61
[ 1051.150000] [<c02a64d0>] (memcpy) from [<c02b3f2c>] 
(__copy_to_user_memcpy+0x144/0x1a8)
[ 1051.150000] [<c02b3f2c>] (__copy_to_user_memcpy) from [<c02b3fb0>] 
(arm_copy_to_user+0x20/0x2c)
[ 1051.150000] [<c02b3fb0>] (arm_copy_to_user) from [<c02b9a54>] 
(copy_to_iter+0x90/0x330)
[ 1051.150000] [<c02b9a54>] (copy_to_iter) from [<c0449d94>] 
(skb_copy_datagram_iter+0x70/0x250)
[ 1051.150000] [<c0449d94>] (skb_copy_datagram_iter) from [<c04dbfe0>] 
(unix_stream_read_actor+0x30/0x3c)
[ 1051.150000] [<c04dbfe0>] (unix_stream_read_actor) from [<c04dca50>] 
(unix_stream_read_generic+0x47c/0x7c0)
[ 1051.150000] [<c04dca50>] (unix_stream_read_generic) from [<c04dce68>] 
(unix_stream_recvmsg+0x48/0x50)
[ 1051.150000] [<c04dce68>] (unix_stream_recvmsg) from [<c0439c9c>] 
(sock_recvmsg+0x20/0x24)
[ 1051.150000] [<c0439c9c>] (sock_recvmsg) from [<c043bab4>] 
(___sys_recvmsg+0x9c/0x178)
[ 1051.150000] [<c043bab4>] (___sys_recvmsg) from [<c043cb5c>] 
(__sys_recvmsg+0x4c/0x78)
[ 1051.150000] [<c043cb5c>] (__sys_recvmsg) from [<c043cba0>] 
(SyS_recvmsg+0x18/0x1c)
[ 1051.150000] [<c043cba0>] (SyS_recvmsg) from [<c000ffe0>] 
(ret_fast_syscall+0x0/0x3c)
[ 1051.150000] Code: f5d1f05c f5d1f07c e8b151f8 e2522020 (e8a051f8)
[ 1051.150000] ---[ end trace 8cd5fc6da1af601e ]---
[ 1051.150000] note: dbus-daemon[1177] exited with preempt_count 1
[ 1051.150000] BUG: spinlock lockup suspected on CPU#0, dbus-daemon/1177
[ 1051.150000]  lock: 0xdc7f1774, .magic: dead4ead, .owner: 
dbus-daemon/1177, .owner_cpu: 0
[ 1051.150000] CPU: 0 PID: 1177 Comm: dbus-daemon Tainted: G      D 
W       4.3.0-rc3+ #1
[ 1051.150000] Hardware name: Atmel SAMA5
[ 1051.150000] [<c001601c>] (unwind_backtrace) from [<c0013a2c>] 
(show_stack+0x20/0x24)
[ 1051.150000] [<c0013a2c>] (show_stack) from [<c02a7730>] 
(dump_stack+0x20/0x28)
[ 1051.150000] [<c02a7730>] (dump_stack) from [<c00d7838>] 
(spin_dump+0x88/0x9c)
[ 1051.150000] [<c00d7838>] (spin_dump) from [<c0059054>] 
(do_raw_spin_lock+0x118/0x15c)
[ 1051.150000] [<c0059054>] (do_raw_spin_lock) from [<c05ee87c>] 
(_raw_spin_lock+0x28/0x2c)
[ 1051.150000] [<c05ee87c>] (_raw_spin_lock) from [<c01031c0>] 
(unmap_single_vma+0x174/0x594)
[ 1051.150000] [<c01031c0>] (unmap_single_vma) from [<c0103e84>] 
(unmap_vmas+0x64/0x78)
[ 1051.150000] [<c0103e84>] (unmap_vmas) from [<c010a730>] 
(exit_mmap+0xe8/0x224)
[ 1051.150000] [<c010a730>] (exit_mmap) from [<c0021b0c>] (mmput+0x48/0xdc)
[ 1051.150000] [<c0021b0c>] (mmput) from [<c0026044>] (do_exit+0x25c/0x938)
[ 1051.150000] [<c0026044>] (do_exit) from [<c0013ca4>] (die+0x274/0x2a8)
[ 1051.150000] [<c0013ca4>] (die) from [<c0013d00>] 
(arm_notify_die+0x28/0x60)
[ 1051.150000] [<c0013d00>] (arm_notify_die) from [<c00092e4>] 
(do_DataAbort+0xb4/0xc4)
[ 1051.150000] [<c00092e4>] (do_DataAbort) from [<c05eed60>] 
(__dabt_svc+0x40/0x60)
[ 1051.150000] Exception stack(0xda007c28 to 0xda007c70)
[ 1051.150000] 7c20:                   00088000 dea2b718 ffffffa5 
702c2764 3d687461 726f2f27
[ 1051.150000] 7c40: 72662f67 65646565 6f746b73 dea2b73d 00000051 
da007cc4 42442f70 da007c7c
[ 1051.150000] 7c60: 2c277375 c02a64d0 a0010013 ffffffff
[ 1051.150000] [<c05eed60>] (__dabt_svc) from [<c02a64d0>] 
(memcpy+0x50/0x330)
[ 1051.150000] [<c02a64d0>] (memcpy) from [<c02b3f2c>] 
(__copy_to_user_memcpy+0x144/0x1a8)
[ 1051.150000] [<c02b3f2c>] (__copy_to_user_memcpy) from [<c02b3fb0>] 
(arm_copy_to_user+0x20/0x2c)
[ 1051.150000] [<c02b3fb0>] (arm_copy_to_user) from [<c02b9a54>] 
(copy_to_iter+0x90/0x330)
[ 1051.150000] [<c02b9a54>] (copy_to_iter) from [<c0449d94>] 
(skb_copy_datagram_iter+0x70/0x250)
[ 1051.150000] [<c0449d94>] (skb_copy_datagram_iter) from [<c04dbfe0>] 
(unix_stream_read_actor+0x30/0x3c)
[ 1051.150000] [<c04dbfe0>] (unix_stream_read_actor) from [<c04dca50>] 
(unix_stream_read_generic+0x47c/0x7c0)
[ 1051.150000] [<c04dca50>] (unix_stream_read_generic) from [<c04dce68>] 
(unix_stream_recvmsg+0x48/0x50)
[ 1051.150000] [<c04dce68>] (unix_stream_recvmsg) from [<c0439c9c>] 
(sock_recvmsg+0x20/0x24)
[ 1051.150000] [<c0439c9c>] (sock_recvmsg) from [<c043bab4>] 
(___sys_recvmsg+0x9c/0x178)
[ 1051.150000] [<c043bab4>] (___sys_recvmsg) from [<c043cb5c>] 
(__sys_recvmsg+0x4c/0x78)
[ 1051.150000] [<c043cb5c>] (__sys_recvmsg) from [<c043cba0>] 
(SyS_recvmsg+0x18/0x1c)
[ 1051.150000] [<c043cba0>] (SyS_recvmsg) from [<c000ffe0>] 

(ret_fast_syscall+0x0/0x3c)

Only the trace related to the user space process change between the reports. For example:

[ 3247.380000] note: NetworkManager[2148] exited with preempt_count 1
[ 3252.700000] BUG: spinlock lockup suspected on CPU#0, NetworkManager/2148
[ 3252.710000]  lock: 0xdc7f1cb4, .magic: dead4ead, .owner: 
NetworkManager/2148, .owner_cpu: 0
[ 3252.720000] CPU: 0 PID: 2148 Comm: NetworkManager Tainted: G D 
W       4.3.0-rc3+ #1
[ 3252.720000] Hardware name: Atmel SAMA5
[ 3252.730000] [<c001601c>] (unwind_backtrace) from [<c0013a2c>] 
(show_stack+0x20/0x24)
[ 3252.730000] [<c0013a2c>] (show_stack) from [<c02a7730>] 
(dump_stack+0x20/0x28)
[ 3252.740000] [<c02a7730>] (dump_stack) from [<c00d7838>] 
(spin_dump+0x88/0x9c)
[ 3252.750000] [<c00d7838>] (spin_dump) from [<c0059054>] 
(do_raw_spin_lock+0x118/0x15c)
[ 3252.750000] [<c0059054>] (do_raw_spin_lock) from [<c05ee87c>] 
(_raw_spin_lock+0x28/0x2c)
[ 3252.760000] [<c05ee87c>] (_raw_spin_lock) from [<c0100a88>] 
(follow_page_mask+0xb8/0x3a0)
[ 3252.770000] [<c0100a88>] (follow_page_mask) from [<c0100e08>] 
(__get_user_pages+0x98/0x4a0)
[ 3252.770000] [<c0100e08>] (__get_user_pages) from [<c0101570>] 
(get_user_pages_unlocked+0x144/0x1e0)
[ 3252.780000] [<c0101570>] (get_user_pages_unlocked) from [<c00f4464>] 
(get_user_pages_fast+0x50/0x58)
[ 3252.790000] [<c00f4464>] (get_user_pages_fast) from [<c0081cfc>] 
(get_futex_key+0x80/0x240)
[ 3252.800000] [<c0081cfc>] (get_futex_key) from [<c0082bdc>] 
(futex_wake+0x50/0x148)
[ 3252.800000] [<c0082bdc>] (futex_wake) from [<c008447c>] 
(do_futex+0x100/0xba8)
[ 3252.810000] [<c008447c>] (do_futex) from [<c0084fc4>] 
(SyS_futex+0xa0/0x19c)
[ 3252.810000] [<c0084fc4>] (SyS_futex) from [<c0021d34>] 
(mm_release+0xf4/0x124)
[ 3252.820000] [<c0021d34>] (mm_release) from [<c0025f08>] 
(do_exit+0x120/0x938)
[ 3252.830000] [<c0025f08>] (do_exit) from [<c0013ca4>] (die+0x274/0x2a8)
[ 3252.830000] [<c0013ca4>] (die) from [<c0013d00>] 
(arm_notify_die+0x28/0x60)
[ 3252.840000] [<c0013d00>] (arm_notify_die) from [<c00092e4>] 
(do_DataAbort+0xb4/0xc4)
[ 3252.840000] [<c00092e4>] (do_DataAbort) from [<c05eed60>] 

(__dabt_svc+0x40/0x60)

The kernel trace and exception stack are always the same.

I am completely lost, as the panic don't seem to be related to anything specific to this embedded system. I would greatly appreciate any hint about where to look.

Best Regards,
Jean-Christian de Rivaz

#1 lore raw
Quoted 3 lines · Jean-Christian de Rivaz

I tried the last git linux master on a embedded system that worked with a 3.19.0 kernel before. I solved most of the problems caused by the kernel upgrade, but every 15 to 20 minutes I get this type of kernel report:

Yes, it's because of the user access changes. The uaccess_with_memcpy() code got broken, and despite trying to fix it, it seems that it's still broken. I'll try again to fix it in the next few days.

In any case, unless you have a Marvell platform, you should have this disabled - it provides a performance boost for Marvell platforms, but degrades performance everywhere else. Please ensure that you disable CONFIG_UACCESS_WITH_MEMCPY.

Signature · 2 lines
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
#2 lore raw

Le 29. 09. 15 18:22, Russell King - ARM Linux a ?crit :

Quoted 13 lines · Jean-Christian de Rivaz
Quoted 3 lines

I tried the last git linux master on a embedded system that worked with a 3.19.0 kernel before. I solved most of the problems caused by the kernel upgrade, but every 15 to 20 minutes I get this type of kernel report:

Yes, it's because of the user access changes. The uaccess_with_memcpy() code got broken, and despite trying to fix it, it seems that it's still broken. I'll try again to fix it in the next few days.

In any case, unless you have a Marvell platform, you should have this disabled - it provides a performance boost for Marvell platforms, but degrades performance everywhere else. Please ensure that you disable CONFIG_UACCESS_WITH_MEMCPY.

Hi Russell, many thanks for your fast help. Work well when CONFIG_UACCESS_WITH_MEMCPY is disabled.

Jean-Christian

#3 lore raw
Quoted 12 lines · Jean-Christian de Rivaz

Le 29. 09. 15 18:22, Russell King - ARM Linux a ?crit :

Quoted 11 lines · Jean-Christian de Rivaz
Quoted 4 lines

I tried the last git linux master on a embedded system that worked with a 3.19.0 kernel before. I solved most of the problems caused by the kernel upgrade, but every 15 to 20 minutes I get this type of kernel report:

Yes, it's because of the user access changes. The uaccess_with_memcpy() code got broken, and despite trying to fix it, it seems that it's still broken. I'll try again to fix it in the next few days.

Quoted 8 lines
Quoted 5 lines

In any case, unless you have a Marvell platform, you should have this disabled - it provides a performance boost for Marvell platforms, but degrades performance everywhere else. Please ensure that you disable CONFIG_UACCESS_WITH_MEMCPY.

Hi Russell, many thanks for your fast help. Work well when CONFIG_UACCESS_WITH_MEMCPY is disabled.

Cool, maybe you could send a patch removing CONFIG_UACCESS_WITH_MEMCPY from arch/arm/configs/at91_dt_defconfig and sama5_defconfig ?