Skip to contentSkip to conversation

nftables DNAT not working

DISCUSSION palica 1 participant 2 messages Oct 21, 2015

lore
Share & tools
lore

palica

author
#0 lore raw

hello list,

please help me debug this.

I have 4.0.5 kernel and 0.5 nftables installed. this is my ruleset

table ip filter {
        chain input {
                type filter hook input priority 0; policy accept;
                ct state established,related counter packets 303 bytes

18088 accept
ct state invalid counter packets 4 bytes 292 log prefix
"Invalid traffic: " drop
iif lo counter packets 0 bytes 0 accept
ip protocol icmp accept
tcp dport ssh ct state new counter packets 5 bytes 212
log prefix "New SSH connection: " accept
tcp dport { http, https} ct state new counter packets 7
bytes 352 log prefix "New HTTP/S connection: " accept
counter packets 30 bytes 1497 log prefix "Dropped
traffic: " drop

        }

        chain forward {
                type filter hook forward priority 0; policy accept;
                ct state new counter packets 0 bytes 0 log prefix
"FORWARD CHAIN: " accept
        }

        chain output {
                type filter hook output priority 0; policy accept;
                ct state new counter packets 33 bytes 2476 log prefix
"OUTPUT CHAIN: "
        }
}
table ip nat {
        chain prerouting {
                type nat hook prerouting priority 0; policy accept;
                tcp dport { http, https} counter packets 0 bytes 0 log
prefix "DNAT :" dnat 10.0.3.40
                log prefix "DNAT prerouting: "
        }

        chain postrouting {
                type nat hook postrouting priority 0; policy accept;
                ip saddr 10.0.3.0/24 oif br0 counter packets 0 bytes 0

snat 37.187.110.20
log prefix "SNAT postrouting: "
}
}
table ip6 filter {
chain input {
type filter hook input priority 0; policy accept; iif lo counter packets 0 bytes 0 accept
ct state established,related counter packets 8 bytes 768
accept
ct state invalid counter packets 0 bytes 0 log prefix
"Invalid traffic: " drop
icmpv6 type { nd-router-advert, nd-neighbor-advert,
echo-request, nd-neighbor-solicit} counter packets 70 bytes 5024 accept
tcp dport ssh ct state new counter packets 0 bytes 0 log
prefix "New SSH connection: " accept
tcp dport { https, http} ct state new counter packets 2
bytes 160 log prefix "New HTTP/S connection: " accept
udp dport domain ct state new counter packets 0 bytes 0
log prefix "New DOMAIN connection: " accept
counter packets 0 bytes 0 log prefix "Dropped
connection: " drop

        }
}

these are the only two packets that get logged upon trying to connect to port 80

Oct 21 12:46:26 kernel: New HTTP/S connection: IN=br0 OUT=

MAC=00:22:4d:ad:bc:d0:1c:e6:c7:52:07:40:86:dd SRC=2001:41d0:0008:d609:0000:0000:0000:0001 DST=2001:41d0:000a:6314:0000:0000:0000:0001 LEN=80 TC=0 HOPLIMIT=59 FLOWLBL=660071 PROTO=TCP SPT=60001 DPT=80 WINDOW=65535 RES=0x00 SYN URGP=0

Oct 21 12:46:26 kernel: New HTTP/S connection: IN=br0 OUT=

MAC=00:22:4d:ad:bc:d0:10:bd:18:e5:ff:80:08:00 SRC=5.135.156.9 DST=37.187.110.20 LEN=60 TOS=0x10 PREC=0x00 TTL=60 ID=15350 DF PROTO=TCP SPT=58750 DPT=80 WINDOW=65535 RES=0x00 SYN URGP=0

the network interfaces are br0 the destination for DNAT is a LXC using veth.

What am I doing wrong/ overlooking?

Thank you very much for your time.

Palica

author
#1 lore raw

ok,

just for the reference this works with iptables:

# Generated by iptables-save v1.4.21 on Wed Oct 21 23:54:14 2015 *raw
:PREROUTING ACCEPT [3275:234388]
:OUTPUT ACCEPT [2229:414696]
COMMIT
# Completed on Wed Oct 21 23:54:14 2015
# Generated by iptables-save v1.4.21 on Wed Oct 21 23:54:14 2015 *nat
:PREROUTING ACCEPT [289:10144]
:INPUT ACCEPT [289:10144]
:OUTPUT ACCEPT [2:152]
:POSTROUTING ACCEPT [11:644]
:LXC - [0:0]
-A PREROUTING -m addrtype --dst-type LOCAL -j LXC
-A OUTPUT ! -d 127.0.0.0/8 -m addrtype --dst-type LOCAL -j LXC -A POSTROUTING -s 10.0.3.0/24 ! -o lxcbr0 -j MASQUERADE
-A POSTROUTING -s 10.0.3.40/32 -d 10.0.3.40/32 -p tcp -m tcp --dport 80 -j MASQUERADE
-A LXC ! -i lxcbr0 -p tcp -m tcp --dport 80 -j DNAT --to-destination 10.0.3.40:80
COMMIT
# Completed on Wed Oct 21 23:54:14 2015
# Generated by iptables-save v1.4.21 on Wed Oct 21 23:54:14 2015 *mangle
:PREROUTING ACCEPT [3275:234388]
:INPUT ACCEPT [3151:212528]
:FORWARD ACCEPT [104:20660]
:OUTPUT ACCEPT [2229:414696]
:POSTROUTING ACCEPT [2333:435356]
COMMIT
# Completed on Wed Oct 21 23:54:14 2015
# Generated by iptables-save v1.4.21 on Wed Oct 21 23:54:14 2015 *filter
:INPUT ACCEPT [291:10240]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [2229:414696]
:LXC - [0:0]
-A INPUT -p tcp -m tcp --dport 22 --tcp-flags FIN,SYN,RST,ACK SYN -j ssh_whitelist
-A INPUT -i eth0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A FORWARD -o lxcbr0 -j LXC
-A FORWARD -o lxcbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A FORWARD -i lxcbr0 ! -o lxcbr0 -j ACCEPT
-A FORWARD -i lxcbr0 -o lxcbr0 -j ACCEPT
-A LXC -d 10.0.3.40/32 ! -i lxcbr0 -o lxcbr0 -p tcp -m tcp --dport 80 -j ACCEPT
COMMIT
# Completed on Wed Oct 21 23:54:14 2015

I have created a lxcbr0 bridge with 10.0.3.1/24 and veth (slave of lxcbr0) for the LXC has 10.0.3.40/24, the Internet-facing interface was changed to eth0.

i will try to convert these iptables to nftables tomorrow.

palica

Quoted 94 lines · palica

hello list,

please help me debug this.

I have 4.0.5 kernel and 0.5 nftables installed. this is my ruleset

table ip filter {
        chain input {
                type filter hook input priority 0; policy accept;
                ct state established,related counter packets 303 bytes

18088 accept
ct state invalid counter packets 4 bytes 292 log prefix
"Invalid traffic: " drop
iif lo counter packets 0 bytes 0 accept
ip protocol icmp accept
tcp dport ssh ct state new counter packets 5 bytes 212
log prefix "New SSH connection: " accept
tcp dport { http, https} ct state new counter packets 7
bytes 352 log prefix "New HTTP/S connection: " accept
counter packets 30 bytes 1497 log prefix "Dropped
traffic: " drop

        }

        chain forward {
                type filter hook forward priority 0; policy accept;
                ct state new counter packets 0 bytes 0 log prefix
"FORWARD CHAIN: " accept
        }

        chain output {
                type filter hook output priority 0; policy accept;
                ct state new counter packets 33 bytes 2476 log prefix
"OUTPUT CHAIN: "
        }
}
table ip nat {
        chain prerouting {
                type nat hook prerouting priority 0; policy accept;
                tcp dport { http, https} counter packets 0 bytes 0 log
prefix "DNAT :" dnat 10.0.3.40
                log prefix "DNAT prerouting: "
        }

        chain postrouting {
                type nat hook postrouting priority 0; policy accept;
                ip saddr 10.0.3.0/24 oif br0 counter packets 0 bytes 0

snat 37.187.110.20
log prefix "SNAT postrouting: "
}
}
table ip6 filter {
chain input {
type filter hook input priority 0; policy accept; iif lo counter packets 0 bytes 0 accept
ct state established,related counter packets 8 bytes 768
accept
ct state invalid counter packets 0 bytes 0 log prefix
"Invalid traffic: " drop
icmpv6 type { nd-router-advert, nd-neighbor-advert,
echo-request, nd-neighbor-solicit} counter packets 70 bytes 5024 accept
tcp dport ssh ct state new counter packets 0 bytes 0 log
prefix "New SSH connection: " accept
tcp dport { https, http} ct state new counter packets 2
bytes 160 log prefix "New HTTP/S connection: " accept
udp dport domain ct state new counter packets 0 bytes 0
log prefix "New DOMAIN connection: " accept
counter packets 0 bytes 0 log prefix "Dropped
connection: " drop

        }
}

these are the only two packets that get logged upon trying to connect to port 80

Oct 21 12:46:26 kernel: New HTTP/S connection: IN=br0 OUT=

MAC=00:22:4d:ad:bc:d0:1c:e6:c7:52:07:40:86:dd SRC=2001:41d0:0008:d609:0000:0000:0000:0001 DST=2001:41d0:000a:6314:0000:0000:0000:0001 LEN=80 TC=0 HOPLIMIT=59 FLOWLBL=660071 PROTO=TCP SPT=60001 DPT=80 WINDOW=65535 RES=0x00 SYN URGP=0

Oct 21 12:46:26 kernel: New HTTP/S connection: IN=br0 OUT=

MAC=00:22:4d:ad:bc:d0:10:bd:18:e5:ff:80:08:00 SRC=5.135.156.9 DST=37.187.110.20 LEN=60 TOS=0x10 PREC=0x00 TTL=60 ID=15350 DF PROTO=TCP SPT=58750 DPT=80 WINDOW=65535 RES=0x00 SYN URGP=0

the network interfaces are br0 the destination for DNAT is a LXC using veth.

What am I doing wrong/ overlooking?

Thank you very much for your time.

Palica
--
To unsubscribe from this list: send the line "unsubscribe netfilter" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html