Problem LD_PRELOADing multiple UST helpers
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi Christian,
The more debug output the merrier !
Could you attach the file generated (ld_debug.out.xxxx) by this command:
LD_PRELOAD="liblttng-ust-libc-wrapper.so liblttng-ust-cyg-profile.so liblttng-ust-pthread-wrapper.so liblttng-ust-dl.so" LD_DEBUG=all LD_DEBUG_OUTPUT=ld_debug.out ls
Also is the output provided in your previous email all of the debug output from 'ls' ?
Cheers!
Quoted 55 lines · Christian Ascheberg
Hello,
I am having a strange problem with LTTng UST helpers on a Cyclone V ARM development board. If I
LD_PRELOADmultiple helpers, then only data of the first loaded helper appears in the trace. Below I have some debug output that looks wrong:This is the command:
root@cyclone5:~# LTTNG_UST_DEBUG=1 LD_PRELOAD="liblttng-ust-libc-wrapper.so liblttng-ust-cyg-profile.so liblttng-ust-pthread-wrapper.so liblttng-ust-dl.so" ls- This is some output regarding the first registration:
liblttng_ust_tracepoint[XXX/XXX]: just registered a tracepoints section from0x76e7b42cand having 2 tracepoints (intracepoint_register_lib()at tracepoint.c:767) liblttng_ust_tracepoint[XXX/XXX]: registered tracepoint: ust_baddr_statedump:soinfo (intracepoint_register_lib()at tracepoint.c:772) liblttng_ust_tracepoint[XXX/XXX]: registered tracepoint: lttng_ust_tracef:event (intracepoint_register_lib()at tracepoint.c:772) libust[XXX/XXX]: Provider "ust_baddr_statedump" accepted, version 1.0 is compatible with LTTng UST provider version 1.0. (incheck_provider_version()at lttng-probes.c:174) libust[XXX/XXX]: adding probeust_baddr_statedumpcontaining 1 events to lazy registration list (inlttng_probe_register()at lttng-probes.c:216) libust[XXX/XXY]: just registered probeust_baddr_statedumpcontaining 1 events (inlttng_lazy_probe_register()at lttng-probes.c:115) libust[XXX/XXY]: Sent register event notification for name "ust_baddr_statedump:soinfo":ret_code0,event_id0
(inustcomm_register_event()at lttng-ust-comm.c:1001)
liblttng_ust_tracepoint[XXX/XXY]: Registering probe to tracepoint ust_baddr_statedump:soinfo (in__tracepoint_probe_register()at tracepoint.c:563) liblttng_ust_tracepoint[XXX/XXX]: Registering probe to tracepoint lttng_ust_tracef:event (in__tracepoint_probe_register()at tracepoint.c:563)- And here is some strange output regarding another registration:
liblttng_ust_tracepoint[XXX/XXX]: just registered a tracepoints section from0x76e7b42cand having 2 tracepoints (intracepoint_register_lib()at tracepoint.c:767) liblttng_ust_tracepoint[XXX/XXX]: registered tracepoint: ust_baddr_statedump:soinfo (intracepoint_register_lib()at tracepoint.c:772) liblttng_ust_tracepoint[XXX/XXX]: registered tracepoint: lttng_ust_tracef:event (intracepoint_register_lib()at tracepoint.c:772) libust[XXX/XXX]: Provider "ust_pthread" accepted, version 1.0 is compatible with LTTng UST provider version 1.0. (incheck_provider_version()at lttng-probes.c:174) libust[XXX/XXX]: adding probeust_pthreadcontaining 4 events to lazy registration list (inlttng_probe_register()at lttng-probes.c:216) libust[XXX/XXX]: just registered probeust_pthreadcontaining 4 events (inlttng_lazy_probe_register()at lttng-probes.c:115) libust[XXX/XXX]: Sent register event notification for name "ust_pthread:pthread_mutex_lock_req":ret_code0,event_id4
(inustcomm_register_event()at lttng-ust-comm.c:1001)
libust[XXX/XXX]: Sent register event notification for name "ust_pthread:pthread_mutex_lock_acq":ret_code0,event_id5
(inustcomm_register_event()at lttng-ust-comm.c:1001)
libust[XXX/XXX]: Sent register event notification for name "ust_pthread:pthread_mutex_trylock":ret_code0,event_id6
(inustcomm_register_event()at lttng-ust-comm.c:1001)
libust[XXX/XXX]: Sent register event notification for name "ust_pthread:pthread_mutex_unlock":ret_code0,event_id7
(inustcomm_register_event()at lttng-ust-comm.c:1001)
liblttng_ust_tracepoint[XXX/XXX]: Registering probe to tracepoint ust_pthread:pthread_mutex_unlock (in__tracepoint_probe_register()at tracepoint.c:563) liblttng_ust_tracepoint[XXX/XXX]: Registering probe to tracepoint ust_pthread:pthread_mutex_trylock (in__tracepoint_probe_register()at tracepoint.c:563) liblttng_ust_tracepoint[XXX/XXX]: Registering probe to tracepoint ust_pthread:pthread_mutex_lock_acq (in__tracepoint_probe_register()at tracepoint.c:563) liblttng_ust_tracepoint[XXX/XXX]: Registering probe to tracepoint ust_pthread:pthread_mutex_lock_req (in__tracepoint_probe_register()at tracepoint.c:563)As with this one, the first three lines of all registrations are always the same and do not match the following (in this case) 'Provider "
ust_pthread" accepted'. I subsequently only get tracepoint data from ust_baddr_statedump:soinfo.I followed these build instructions for my board using Yocto 1.7: http://rocketboards.org/foswiki/view/Documentation/GSRD150CompilingLinux
I also tried updating the recipes to use the latest version of LTTng. The output above is from LTTng v2.6.2.
I can provide more debug output if that helps. I do not see this problem on my desktop computer.Can somebody confirm this problem?
Thanks, Christian
_______________________________________________
lttng-dev mailing list
[email protected]
http://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev
Signature · 2 lines
Jonathan R. Julien Efficios
A message that is not in the archive (sent off-list or not yet received): [email protected]
The requested output that was generated by the stated command is in http://pastebin.com/zxuFQ8yV (part 1) and http://pastebin.com/GgR8d3pV (part 2).
The full LTTng debug output, split by executed commands, is in http://pastebin.com/NsCxaYGT
As I tried to say before, note that these three lines are occuring for every registration, but they should occur only once:
liblttng_ust_tracepoint[313/313]: just registered a tracepoints section from 0x76e7b42c and having 2 tracepoints (in tracepoint_register_lib() at tracepoint.c:767) liblttng_ust_tracepoint[313/313]: registered tracepoint: ust_baddr_statedump:soinfo (in tracepoint_register_lib() at tracepoint.c:772) liblttng_ust_tracepoint[313/313]: registered tracepoint: lttng_ust_tracef:event (in tracepoint_register_lib() at tracepoint.c:772)
Corresponding lines for other tracepoint providers are missing instead.
This is the full UST part of the debug output. Part of that is what I had posted before.
root@cyclone5:~# LD_PRELOAD="liblttng-ust-libc-wrapper.so liblttng-ust-cyg-profile.so liblttng-ust-pthread-wrapper.so liblttng-ust-dl.so" ls liblttng_ust_tracepoint[313/313]: just registered a tracepoints section from 0x76e7b42c and having 2 tracepoints (in tracepoint_register_lib() at tracepoint.c:767) liblttng_ust_tracepoint[313/313]: registered tracepoint: ust_baddr_statedump:soinfo (in tracepoint_register_lib() at tracepoint.c:772) liblttng_ust_tracepoint[313/313]: registered tracepoint: lttng_ust_tracef:event (in tracepoint_register_lib() at tracepoint.c:772) libust[313/313]: Provider "ust_baddr_statedump" accepted, version 1.0 is compatible with LTTng UST provider version 1.0. (in check_provider_version() at lttng-probes.c:174) libust[313/313]: adding probe ust_baddr_statedump containing 1 events to lazy registration list (in lttng_probe_register() at lttng-probes.c:216) libust[313/313]: LTT : ltt ring buffer client "relay-metadata-mmap" init (in lttng_ring_buffer_metadata_client_init() at lttng-ring-buffer-metadata-client.h:330) libust[313/313]: LTT : ltt ring buffer client "relay-overwrite-mmap" init (in lttng_ring_buffer_client_overwrite_init() at lttng-ring-buffer-client.h:681) libust[313/313]: LTT : ltt ring buffer client "relay-overwrite-rt-mmap" init (in lttng_ring_buffer_client_overwrite_rt_init() at lttng-ring-buffer-client.h:681) libust[313/313]: LTT : ltt ring buffer client "relay-discard-mmap" init (in lttng_ring_buffer_client_discard_init() at lttng-ring-buffer-client.h:681) libust[313/313]: LTT : ltt ring buffer client "relay-discard-rt-mmap" init (in lttng_ring_buffer_client_discard_rt_init() at lttng-ring-buffer-client.h:681) libust[313/315]: Info: sessiond not accepting connections to local apps socket (in ust_listener_thread() at lttng-ust-comm.c:1224) libust[313/315]: Waiting for local apps sessiond (in wait_for_sessiond() at lttng-ust-comm.c:1135) libust[313/314]: Message Received "Get Tracer Version" (65), Handle "root" (0) (in print_cmd() at lttng-ust-comm.c:367) libust[313/314]: Return value: 0 (in handle_message() at lttng-ust-comm.c:827) libust[313/314]: message successfully sent (in send_reply() at lttng-ust-comm.c:484) libust[313/314]: Message Received "Create Session" (64), Handle "root" (0) (in print_cmd() at lttng-ust-comm.c:367) libust[313/314]: Return value: 1 (in handle_message() at lttng-ust-comm.c:827) libust[313/314]: message successfully sent (in send_reply() at lttng-ust-comm.c:484) libust[313/314]: Message Received "Create Channel" (81), Handle "session" (1) (in print_cmd() at lttng-ust-comm.c:367) libust[313/314]: channel data received (in handle_message() at lttng-ust-comm.c:723) libust[313/314]: Return value: 2 (in handle_message() at lttng-ust-comm.c:827) libust[313/314]: message successfully sent (in send_reply() at lttng-ust-comm.c:484) libust[313/314]: Message Received "Create Stream" (96), Handle "channel" (2) (in print_cmd() at lttng-ust-comm.c:367) libust[313/314]: Return value: 0 (in handle_message() at lttng-ust-comm.c:827) libust[313/314]: message successfully sent (in send_reply() at lttng-ust-comm.c:484) libust[313/314]: Message Received "Create Stream" (96), Handle "channel" (2) (in print_cmd() at lttng-ust-comm.c:367) libust[313/314]: Return value: 0 (in handle_message() at lttng-ust-comm.c:827) libust[313/314]: message successfully sent (in send_reply() at lttng-ust-comm.c:484) libust[313/314]: Message Received "Create Context" (112), Handle "channel" (2) (in print_cmd() at lttng-ust-comm.c:367) libust[313/314]: Return value: 0 (in handle_message() at lttng-ust-comm.c:827) libust[313/314]: message successfully sent (in send_reply() at lttng-ust-comm.c:484) libust[313/314]: Message Received "Create Context" (112), Handle "channel" (2) (in print_cmd() at lttng-ust-comm.c:367) libust[313/314]: Return value: 0 (in handle_message() at lttng-ust-comm.c:827) libust[313/314]: message successfully sent (in send_reply() at lttng-ust-comm.c:484) libust[313/314]: Message Received "Create Context" (112), Handle "channel" (2) (in print_cmd() at lttng-ust-comm.c:367) libust[313/314]: Return value: 0 (in handle_message() at lttng-ust-comm.c:827) libust[313/314]: message successfully sent (in send_reply() at lttng-ust-comm.c:484) libust[313/314]: Message Received "Create Context" (112), Handle "channel" (2) (in print_cmd() at lttng-ust-comm.c:367) libust[313/314]: Return value: 0 (in handle_message() at lttng-ust-comm.c:827) libust[313/314]: message successfully sent (in send_reply() at lttng-ust-comm.c:484) libust[313/314]: Message Received "Create Event" (97), Handle "channel" (2) (in print_cmd() at lttng-ust-comm.c:367) libust[313/314]: Return value: 3 (in handle_message() at lttng-ust-comm.c:827) libust[313/314]: message successfully sent (in send_reply() at lttng-ust-comm.c:484) libust[313/314]: Message Received "Enable" (128), Handle "enabler" (3) (in print_cmd() at lttng-ust-comm.c:367) libust[313/314]: Return value: 0 (in handle_message() at lttng-ust-comm.c:827) libust[313/314]: message successfully sent (in send_reply() at lttng-ust-comm.c:484) libust[313/314]: Message Received "Enable" (128), Handle "session" (1) (in print_cmd() at lttng-ust-comm.c:367) libust[313/314]: Sent register channel notification: chan_id 0, header_type 1 (in ustcomm_register_channel() at lttng-ust-comm.c:1108) libust[313/314]: just registered probe ust_baddr_statedump containing 1 events (in lttng_lazy_probe_register() at lttng-probes.c:115) libust[313/314]: Sent register event notification for name "ust_baddr_statedump:soinfo": ret_code 0, event_id 0 (in ustcomm_register_event() at lttng-ust-comm.c:1001) liblttng_ust_tracepoint[313/314]: Registering probe to tracepoint ust_baddr_statedump:soinfo (in __tracepoint_probe_register() at tracepoint.c:563) libust[313/314]: Return value: 0 (in handle_message() at lttng-ust-comm.c:827) libust[313/314]: message successfully sent (in send_reply() at lttng-ust-comm.c:484) libust[313/314]: Message Received "Wait for Quiescent State" (67), Handle "root" (0) (in print_cmd() at lttng-ust-comm.c:367) libust[313/314]: Return value: 0 (in handle_message() at lttng-ust-comm.c:827) libust[313/314]: message successfully sent (in send_reply() at lttng-ust-comm.c:484) libust[313/314]: Message Received "Registration Done" (68), Handle "root" (0) (in print_cmd() at lttng-ust-comm.c:367) libust[313/314]: Return value: 0 (in handle_message() at lttng-ust-comm.c:827) libust[313/314]: message successfully sent (in send_reply() at lttng-ust-comm.c:484) libust[313/313]: adding probe lttng_ust_tracef containing 1 events to lazy registration list (in lttng_probe_register() at lttng-probes.c:216) libust[313/313]: just registered probe lttng_ust_tracef containing 1 events (in lttng_lazy_probe_register() at lttng-probes.c:115) libust[313/313]: Sent register event notification for name "lttng_ust_tracef:event": ret_code 0, event_id 1 (in ustcomm_register_event() at lttng-ust-comm.c:1001) liblttng_ust_tracepoint[313/313]: Registering probe to tracepoint lttng_ust_tracef:event (in __tracepoint_probe_register() at tracepoint.c:563) liblttng_ust_tracepoint[313/313]: just registered a tracepoints section from 0x76e7b42c and having 2 tracepoints (in tracepoint_register_lib() at tracepoint.c:767) liblttng_ust_tracepoint[313/313]: registered tracepoint: ust_baddr_statedump:soinfo (in tracepoint_register_lib() at tracepoint.c:772) liblttng_ust_tracepoint[313/313]: registered tracepoint: lttng_ust_tracef:event (in tracepoint_register_lib() at tracepoint.c:772) libust[313/313]: Provider "ust_baddr" accepted, version 1.0 is compatible with LTTng UST provider version 1.0. (in check_provider_version() at lttng-probes.c:174) libust[313/313]: adding probe ust_baddr containing 2 events to lazy registration list (in lttng_probe_register() at lttng-probes.c:216) libust[313/313]: just registered probe ust_baddr containing 2 events (in lttng_lazy_probe_register() at lttng-probes.c:115) libust[313/313]: Sent register event notification for name "ust_baddr:push": ret_code 0, event_id 2 (in ustcomm_register_event() at lttng-ust-comm.c:1001) libust[313/313]: Sent register event notification for name "ust_baddr:pop": ret_code 0, event_id 3 (in ustcomm_register_event() at lttng-ust-comm.c:1001) liblttng_ust_tracepoint[313/313]: Registering probe to tracepoint ust_baddr:pop (in __tracepoint_probe_register() at tracepoint.c:563) liblttng_ust_tracepoint[313/313]: Registering probe to tracepoint ust_baddr:push (in __tracepoint_probe_register() at tracepoint.c:563) liblttng_ust_tracepoint[313/313]: just registered a tracepoints section from 0x76e7b42c and having 2 tracepoints (in tracepoint_register_lib() at tracepoint.c:767) liblttng_ust_tracepoint[313/313]: registered tracepoint: ust_baddr_statedump:soinfo (in tracepoint_register_lib() at tracepoint.c:772) liblttng_ust_tracepoint[313/313]: registered tracepoint: lttng_ust_tracef:event (in tracepoint_register_lib() at tracepoint.c:772) libust[313/313]: Provider "ust_pthread" accepted, version 1.0 is compatible with LTTng UST provider version 1.0. (in check_provider_version() at lttng-probes.c:174) libust[313/313]: adding probe ust_pthread containing 4 events to lazy registration list (in lttng_probe_register() at lttng-probes.c:216) libust[313/313]: just registered probe ust_pthread containing 4 events (in lttng_lazy_probe_register() at lttng-probes.c:115) libust[313/313]: Sent register event notification for name "ust_pthread:pthread_mutex_lock_req": ret_code 0, event_id 4 (in ustcomm_register_event() at lttng-ust-comm.c:1001) libust[313/313]: Sent register event notification for name "ust_pthread:pthread_mutex_lock_acq": ret_code 0, event_id 5 (in ustcomm_register_event() at lttng-ust-comm.c:1001) libust[313/313]: Sent register event notification for name "ust_pthread:pthread_mutex_trylock": ret_code 0, event_id 6 (in ustcomm_register_event() at lttng-ust-comm.c:1001) libust[313/313]: Sent register event notification for name "ust_pthread:pthread_mutex_unlock": ret_code 0, event_id 7 (in ustcomm_register_event() at lttng-ust-comm.c:1001) liblttng_ust_tracepoint[313/313]: Registering probe to tracepoint ust_pthread:pthread_mutex_unlock (in __tracepoint_probe_register() at tracepoint.c:563) liblttng_ust_tracepoint[313/313]: Registering probe to tracepoint ust_pthread:pthread_mutex_trylock (in __tracepoint_probe_register() at tracepoint.c:563) liblttng_ust_tracepoint[313/313]: Registering probe to tracepoint ust_pthread:pthread_mutex_lock_acq (in __tracepoint_probe_register() at tracepoint.c:563) liblttng_ust_tracepoint[313/313]: Registering probe to tracepoint ust_pthread:pthread_mutex_lock_req (in __tracepoint_probe_register() at tracepoint.c:563) liblttng_ust_tracepoint[313/313]: just registered a tracepoints section from 0x76e7b42c and having 2 tracepoints (in tracepoint_register_lib() at tracepoint.c:767) liblttng_ust_tracepoint[313/313]: registered tracepoint: ust_baddr_statedump:soinfo (in tracepoint_register_lib() at tracepoint.c:772) liblttng_ust_tracepoint[313/313]: registered tracepoint: lttng_ust_tracef:event (in tracepoint_register_lib() at tracepoint.c:772) libust[313/313]: Provider "lttng_ust_cyg_profile" accepted, version 1.0 is compatible with LTTng UST provider version 1.0. (in check_provider_version() at lttng-probes.c:174) libust[313/313]: adding probe lttng_ust_cyg_profile containing 2 events to lazy registration list (in lttng_probe_register() at lttng-probes.c:216) libust[313/313]: just registered probe lttng_ust_cyg_profile containing 2 events (in lttng_lazy_probe_register() at lttng-probes.c:115) libust[313/313]: Sent register event notification for name "lttng_ust_cyg_profile:func_entry": ret_code 0, event_id 8 (in ustcomm_register_event() at lttng-ust-comm.c:1001) libust[313/313]: Sent register event notification for name "lttng_ust_cyg_profile:func_exit": ret_code 0, event_id 9 (in ustcomm_register_event() at lttng-ust-comm.c:1001) liblttng_ust_tracepoint[313/313]: Registering probe to tracepoint lttng_ust_cyg_profile:func_exit (in __tracepoint_probe_register() at tracepoint.c:563) liblttng_ust_tracepoint[313/313]: Registering probe to tracepoint lttng_ust_cyg_profile:func_entry (in __tracepoint_probe_register() at tracepoint.c:563) liblttng_ust_tracepoint[313/313]: just registered a tracepoints section from 0x76e7b42c and having 2 tracepoints (in tracepoint_register_lib() at tracepoint.c:767) liblttng_ust_tracepoint[313/313]: registered tracepoint: ust_baddr_statedump:soinfo (in tracepoint_register_lib() at tracepoint.c:772) liblttng_ust_tracepoint[313/313]: registered tracepoint: lttng_ust_tracef:event (in tracepoint_register_lib() at tracepoint.c:772) libust[313/313]: Provider "ust_libc" accepted, version 1.0 is compatible with LTTng UST provider version 1.0. (in check_provider_version() at lttng-probes.c:174) libust[313/313]: adding probe ust_libc containing 6 events to lazy registration list (in lttng_probe_register() at lttng-probes.c:216) libust[313/313]: just registered probe ust_libc containing 6 events (in lttng_lazy_probe_register() at lttng-probes.c:115) libust[313/313]: Sent register event notification for name "ust_libc:malloc": ret_code 0, event_id 10 (in ustcomm_register_event() at lttng-ust-comm.c:1001) libust[313/313]: Sent register event notification for name "ust_libc:free": ret_code 0, event_id 11 (in ustcomm_register_event() at lttng-ust-comm.c:1001) libust[313/313]: Sent register event notification for name "ust_libc:calloc": ret_code 0, event_id 12 (in ustcomm_register_event() at lttng-ust-comm.c:1001) libust[313/313]: Sent register event notification for name "ust_libc:realloc": ret_code 0, event_id 13 (in ustcomm_register_event() at lttng-ust-comm.c:1001) libust[313/313]: Sent register event notification for name "ust_libc:memalign": ret_code 0, event_id 14 (in ustcomm_register_event() at lttng-ust-comm.c:1001) libust[313/313]: Sent register event notification for name "ust_libc:posix_memalign": ret_code 0, event_id 15 (in ustcomm_register_event() at lttng-ust-comm.c:1001) liblttng_ust_tracepoint[313/313]: Registering probe to tracepoint ust_libc:posix_memalign (in __tracepoint_probe_register() at tracepoint.c:563) liblttng_ust_tracepoint[313/313]: Registering probe to tracepoint ust_libc:memalign (in __tracepoint_probe_register() at tracepoint.c:563) liblttng_ust_tracepoint[313/313]: Registering probe to tracepoint ust_libc:realloc (in __tracepoint_probe_register() at tracepoint.c:563) liblttng_ust_tracepoint[313/313]: Registering probe to tracepoint ust_libc:calloc (in __tracepoint_probe_register() at tracepoint.c:563) liblttng_ust_tracepoint[313/313]: Registering probe to tracepoint ust_libc:free (in __tracepoint_probe_register() at tracepoint.c:563) liblttng_ust_tracepoint[313/313]: Registering probe to tracepoint ust_libc:malloc (in __tracepoint_probe_register() at tracepoint.c:563)
Am 21.10.2015 um 17:38 schrieb Jonathan Rajotte Julien:
Quoted 69 lines
Hi Christian,
The more debug output the merrier !
Could you attach the file generated (ld_debug.out.xxxx) by this command:
LD_PRELOAD="liblttng-ust-libc-wrapper.so liblttng-ust-cyg-profile.so liblttng-ust-pthread-wrapper.so liblttng-ust-dl.so" LD_DEBUG=all LD_DEBUG_OUTPUT=ld_debug.out ls
Also is the output provided in your previous email all of the debug output from 'ls' ?
Cheers!
Quoted 55 lines · Christian Ascheberg
Hello,
I am having a strange problem with LTTng UST helpers on a Cyclone V ARM development board. If I
LD_PRELOADmultiple helpers, then only data of the first loaded helper appears in the trace. Below I have some debug output that looks wrong:This is the command:
root@cyclone5:~# LTTNG_UST_DEBUG=1 LD_PRELOAD="liblttng-ust-libc-wrapper.so liblttng-ust-cyg-profile.so liblttng-ust-pthread-wrapper.so liblttng-ust-dl.so" ls- This is some output regarding the first registration:
liblttng_ust_tracepoint[XXX/XXX]: just registered a tracepoints section from0x76e7b42cand having 2 tracepoints (intracepoint_register_lib()at tracepoint.c:767) liblttng_ust_tracepoint[XXX/XXX]: registered tracepoint: ust_baddr_statedump:soinfo (intracepoint_register_lib()at tracepoint.c:772) liblttng_ust_tracepoint[XXX/XXX]: registered tracepoint: lttng_ust_tracef:event (intracepoint_register_lib()at tracepoint.c:772) libust[XXX/XXX]: Provider "ust_baddr_statedump" accepted, version 1.0 is compatible with LTTng UST provider version 1.0. (incheck_provider_version()at lttng-probes.c:174) libust[XXX/XXX]: adding probeust_baddr_statedumpcontaining 1 events to lazy registration list (inlttng_probe_register()at lttng-probes.c:216) libust[XXX/XXY]: just registered probeust_baddr_statedumpcontaining 1 events (inlttng_lazy_probe_register()at lttng-probes.c:115) libust[XXX/XXY]: Sent register event notification for name "ust_baddr_statedump:soinfo":ret_code0,event_id0
(inustcomm_register_event()at lttng-ust-comm.c:1001)
liblttng_ust_tracepoint[XXX/XXY]: Registering probe to tracepoint ust_baddr_statedump:soinfo (in__tracepoint_probe_register()at tracepoint.c:563) liblttng_ust_tracepoint[XXX/XXX]: Registering probe to tracepoint lttng_ust_tracef:event (in__tracepoint_probe_register()at tracepoint.c:563)- And here is some strange output regarding another registration:
liblttng_ust_tracepoint[XXX/XXX]: just registered a tracepoints section from0x76e7b42cand having 2 tracepoints (intracepoint_register_lib()at tracepoint.c:767) liblttng_ust_tracepoint[XXX/XXX]: registered tracepoint: ust_baddr_statedump:soinfo (intracepoint_register_lib()at tracepoint.c:772) liblttng_ust_tracepoint[XXX/XXX]: registered tracepoint: lttng_ust_tracef:event (intracepoint_register_lib()at tracepoint.c:772) libust[XXX/XXX]: Provider "ust_pthread" accepted, version 1.0 is compatible with LTTng UST provider version 1.0. (incheck_provider_version()at lttng-probes.c:174) libust[XXX/XXX]: adding probeust_pthreadcontaining 4 events to lazy registration list (inlttng_probe_register()at lttng-probes.c:216) libust[XXX/XXX]: just registered probeust_pthreadcontaining 4 events (inlttng_lazy_probe_register()at lttng-probes.c:115) libust[XXX/XXX]: Sent register event notification for name "ust_pthread:pthread_mutex_lock_req":ret_code0,event_id4
(inustcomm_register_event()at lttng-ust-comm.c:1001)
libust[XXX/XXX]: Sent register event notification for name "ust_pthread:pthread_mutex_lock_acq":ret_code0,event_id5
(inustcomm_register_event()at lttng-ust-comm.c:1001)
libust[XXX/XXX]: Sent register event notification for name "ust_pthread:pthread_mutex_trylock":ret_code0,event_id6
(inustcomm_register_event()at lttng-ust-comm.c:1001)
libust[XXX/XXX]: Sent register event notification for name "ust_pthread:pthread_mutex_unlock":ret_code0,event_id7
(inustcomm_register_event()at lttng-ust-comm.c:1001)
liblttng_ust_tracepoint[XXX/XXX]: Registering probe to tracepoint ust_pthread:pthread_mutex_unlock (in__tracepoint_probe_register()at tracepoint.c:563) liblttng_ust_tracepoint[XXX/XXX]: Registering probe to tracepoint ust_pthread:pthread_mutex_trylock (in__tracepoint_probe_register()at tracepoint.c:563) liblttng_ust_tracepoint[XXX/XXX]: Registering probe to tracepoint ust_pthread:pthread_mutex_lock_acq (in__tracepoint_probe_register()at tracepoint.c:563) liblttng_ust_tracepoint[XXX/XXX]: Registering probe to tracepoint ust_pthread:pthread_mutex_lock_req (in__tracepoint_probe_register()at tracepoint.c:563)As with this one, the first three lines of all registrations are always the same and do not match the following (in this case) 'Provider "
ust_pthread" accepted'. I subsequently only get tracepoint data from ust_baddr_statedump:soinfo.I followed these build instructions for my board using Yocto 1.7: http://rocketboards.org/foswiki/view/Documentation/GSRD150CompilingLinux
I also tried updating the recipes to use the latest version of LTTng. The output above is from LTTng v2.6.2.
I can provide more debug output if that helps. I do not see this problem on my desktop computer.Can somebody confirm this problem?
Thanks, Christian
_______________________________________________
lttng-dev mailing list
[email protected]
http://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev