Skip to contentSkip to conversation

cups-filters

DISCUSSION Steffen Sledz 2 participants 5 messages Oct 21, 2015 – Oct 22, 2015

lore
Share & tools
lore

Steffen Sledz

author
#0 lore raw

Does anybody know about a recipe providing cups-filters?

http://layers.openembedded.org was not really helpful here.

Signature · 7 lines
DResearch Fahrzeugelektronik GmbH
Otto-Schmirgal-Str. 3, 10319 Berlin, Germany
Tel: +49 30 515932-237 mailto:[email protected]
Fax: +49 30 515932-299
Geschäftsführer: Dr. Michael Weber, Werner Mögle;
Amtsgericht Berlin Charlottenburg; HRB 130120 B;
Ust.-IDNr. DE273952058
#1 lore raw
Quoted 4 lines · Steffen Sledz

Does anybody know about a recipe providing cups-filters?

http://layers.openembedded.org was not really helpful here.

Hi,
I have one which works for my purposes but it is not really tested... It is based on something I found somewhere on the web (I don't remember the source).
Hope it helps ;-)

best regards,
Richard

cups-filters.inc:
^^^^^^^^^^^^^^^^^
DESCRIPTION = "CUPS backends, filters, and other software"
HOMEPAGE = "http://www.linuxfoundation.org/collaborate/workgroups/openprinting/cups-filters" LICENSE = "GPLv2 & LGPLv2 & MIT & GPLv2+ & GPLv3"
SECTION = "console/utils"
DEPENDS = "cups lcms2 ijs poppler qpdf"
PR = "r4"

SRC_URI = "http://openprinting.org/download/cups-filters/cups-filters-${PV}.tar.gz"

inherit autotools

PACKAGES += "\
        ${PN}-data \
        "

#FILES_${PN}-gst = "\

#       ${libdir}/cups/filter/gstopxl \
#       ${libdir}/cups/filter/gstoraster \
#       "

#RCONFLICTS_${PN}-gst = "ghostscript-cups"

#FILES_${PN}-banners = "\
# /usr/share/cups/banners \
# "

FILES_${PN}-data = "\
        /usr/share/cups/data \
        "
FILES_${PN}-dbg += "\
        ${libdir}/cups/filter/.debug \
        ${libdir}/cups/backend/.debug \
        "
FILES_${PN} += "\
        ${libdir}/cups/filter/bannertopdf \
        ${libdir}/cups/filter/commandtoescpx \
        ${libdir}/cups/filter/commandtopclx \
        ${libdir}/cups/filter/foomatic-rip \
        ${libdir}/cups/filter/imagetopdf \
        ${libdir}/cups/filter/imagetops \
        ${libdir}/cups/filter/imagetoraster \
        ${libdir}/cups/filter/pdftoijs \
        ${libdir}/cups/filter/pdftoippprinter \
        ${libdir}/cups/filter/pdftoopvp \
        ${libdir}/cups/filter/pdftopdf \
        ${libdir}/cups/filter/pdftops \
        ${libdir}/cups/filter/pdftoraster \
        ${libdir}/cups/filter/pstopdf \
        ${libdir}/cups/filter/rastertoescpx \
        ${libdir}/cups/filter/rastertopclx \
        ${libdir}/cups/filter/textonly \
        ${libdir}/cups/filter/texttopdf \
        ${libdir}/cups/filter/texttops \
        ${libdir}/cups/filter/urftopdf \
        ${libdir}/cups/backend \
        /usr/share/cups/charsets \
        /usr/share/cups/drv \
        /usr/share/cups/mime \
        /usr/share/cups/ppdc \
        /usr/share/ppd/cupsfilters \
        "
do_install_append() {
        # remove banners
        rm -rf ${D}/usr/share/cups/banners

        # remove gst, already provided by ghostscript-cups
        rm -f ${D}${libdir}/cups/filter/gstopxl
        rm -f ${D}${libdir}/cups/filter/gstoraster

        # remove testprint (already provided by cups)
        rm -f ${D}/usr/share/cups/data/testprint
}

#RDEPENDS_${PN} += "libqpdf libpoppler"

author
#2 lore raw
Quoted 8 lines · Richard Leitner
Quoted 3 lines · Steffen Sledz

Does anybody know about a recipe providing cups-filters?

http://layers.openembedded.org was not really helpful here.

I have one which works for my purposes but it is not really tested... It is based on something I found somewhere on the web (I don't remember the source).

Any plans to make this part of an official layer?

Regards,
Steffen

Signature · 7 lines
DResearch Fahrzeugelektronik GmbH
Otto-Schmirgal-Str. 3, 10319 Berlin, Germany
Tel: +49 30 515932-237 mailto:[email protected]
Fax: +49 30 515932-299
Geschäftsführer: Dr. Michael Weber, Werner Mögle;
Amtsgericht Berlin Charlottenburg; HRB 130120 B;
Ust.-IDNr. DE273952058
#3 lore raw
Quoted 4 lines · Steffen Sledz
Quoted 3 lines · Richard Leitner
Quoted 2 lines · Steffen Sledz

Does anybody know about a recipe providing cups-filters?

Quoted 8 lines
Quoted 5 lines
Quoted 1 line

http://layers.openembedded.org was not really helpful here.

I have one which works for my purposes but it is not really tested... It is based on something I found somewhere on the web (I don't remember the source).

Any plans to make this part of an official layer?

Currently I have no time for creating and testing a clean patch for it. But if anybody has time and motivation, feel free to do it ;-)

regards,
Richard L

author
#4 lore raw
Quoted 7 lines · Richard Leitner
Quoted 6 lines · Steffen Sledz
Quoted 5 lines · Richard Leitner
Quoted 3 lines · Steffen Sledz

Does anybody know about a recipe providing cups-filters?

http://layers.openembedded.org was not really helpful here.

Quoted 8 lines
Quoted 6 lines
Quoted 3 lines

I have one which works for my purposes but it is not really tested... It is based on something I found somewhere on the web (I don't remember the source).

Any plans to make this part of an official layer?

Currently I have no time for creating and testing a clean patch for it. But if anybody has time and motivation, feel free to do it ;-)

I could try to prepare one.

@layer-maintainers: What would be the right layer for this? openembedded-core or meta-oe?

Signature · 7 lines
DResearch Fahrzeugelektronik GmbH
Otto-Schmirgal-Str. 3, 10319 Berlin, Germany
Tel: +49 30 515932-237 mailto:[email protected]
Fax: +49 30 515932-299
Geschäftsführer: Dr. Michael Weber, Werner Mögle;
Amtsgericht Berlin Charlottenburg; HRB 130120 B;
Ust.-IDNr. DE273952058