Skip to contentSkip to conversation

Python3 and Numpy

DISCUSSION Benoit Rapidel 3 participants 5 messages Nov 27, 2015 – Dec 18, 2015 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

I found one in meta. How do I update it ? I'm using poky jethro. Should a create a new one named python3-numpy or the same recipe should handle both python versions ?

B

@Alex, sorry for that, reposting in the mailing list.

Quoted 11 lines · Alexander Kanavin
Quoted 3 lines · Benoit Rapidel

I want to install NumPy with Python3 supporton a Beaglebone Black. Unfortunately, I couldn't find any information or a recipe. Anyone has ever tried, success, failed ?

There is a recipe for numpy in oe-core, but it's not particularly up to date, and doesn't have python3 support. You are welcome to update it and send patches :)

Alex

Signature · 3 lines
Benoit Rapidel

Co-founder & CTO at ExMachina
#2 lore raw
Quoted 4 lines · Benoit Rapidel

I found one in meta. How do I update it ? I'm using poky jethro. Should a create a new one named python3-numpy or the same recipe should handle both
python versions ?

From what I can see, the standard approach is to create a separate recipe for python3.

If you want to tweak, it's best to base your work on poky master.

Alex

#3 lore raw

Ok, thanks

Numpy start to except ld can't find npymath and npysort. I checked with devshell, there is libnpymath.a and libnpysort.a within build/temp.linux-x86_64-3.4, which is used by ld to find libs. Do you have any clues ?

I'm trying to compile numpy 1.9.2 with python3.

Thanks in advance

B

Quoted 12 lines · Alexander Kanavin
Quoted 4 lines · Benoit Rapidel

I found one in meta. How do I update it ? I'm using poky jethro. Should a create a new one named python3-numpy or the same recipe should handle both
python versions ?

From what I can see, the standard approach is to create a separate recipe for python3.

If you want to tweak, it's best to base your work on poky master.

Alex

Signature · 3 lines
Benoit Rapidel

Co-founder & CTO at ExMachina
#4 lore raw

Here the full log:

http://sprunge.us/SYCO?log

Quoted 27 lines · Benoit Rapidel

Ok, thanks

Numpy start to except ld can't find npymath and npysort. I checked with devshell, there is libnpymath.a and libnpysort.a within build/temp.linux-x86_64-3.4, which is used by ld to find libs. Do you have any clues ?

I'm trying to compile numpy 1.9.2 with python3.

Thanks in advance

B

Quoted 13 lines · Alexander Kanavin
Quoted 4 lines · Benoit Rapidel

I found one in meta. How do I update it ? I'm using poky jethro. Should a create a new one named python3-numpy or the same recipe should handle both
python versions ?

From what I can see, the standard approach is to create a separate recipe for
python3.

If you want to tweak, it's best to base your work on poky master.

Alex

Signature · 6 lines
Benoit Rapidel
Co-founder & CTO
ExMachina

[email protected]
+33 (0)6 89 63 83 68
#5 lore raw

Hello,

I'm still trying to get python3-numpy to compile. I have been inspecting log file for quite a while. One lead I got is that gcc have -L=/usr/lib in its arguments. I diff log.do_compile from python3-numpy and log.do_compile from python-numpy.
I see no reference to /usr/lib in python-numpy log. How can I remove this -L=/usr/lib from arguments to try compiling without searching in this dir ?

Here is the recipe failing:

https://github.com/exmachina-dev/meta-exm-core/blob/master/recipes-python/python3-numpy/python3-numpy_1.10.1.bb

It's mainly taken from python-numpy_1.10.1.bb found in openembedded-core/meta. I renamed all refs of python to point to python3 and I fixed a bug. Config files couldn't be copied due to multiple paths after grep src (py and py3).

And here the full log from log.do_compile (-L=/usr/lib is found at L2143, L2193, L4335 and L4385):

http://sprunge.us/INYI?log

I also found that the setup.py tried to build Fortran code with /usr/bin/gfortran (from host). As python-numpy did not find gfortran, I temporarily uninstalled gfortran from host (L97 now don't find gfortran).

I'm really stuck with this recipe. Any help from you guys is much appreciated.

Many thanks,
B

Quoted 33 lines · Benoit Rapidel

Here the full log:

http://sprunge.us/SYCO?log

Quoted 27 lines · Benoit Rapidel

Ok, thanks

Numpy start to except ld can't find npymath and npysort. I checked with devshell, there is libnpymath.a and libnpysort.a within build/temp.linux-x86_64-3.4, which is used by ld to find libs. Do you have any clues ?

I'm trying to compile numpy 1.9.2 with python3.

Thanks in advance

B

Quoted 13 lines · Alexander Kanavin
Quoted 4 lines · Benoit Rapidel

I found one in meta. How do I update it ? I'm using poky jethro. Should a create a new one named python3-numpy or the same recipe should handle both
python versions ?

From what I can see, the standard approach is to create a separate recipe for
python3.

If you want to tweak, it's best to base your work on poky master.

Alex

Signature · 6 lines
Benoit Rapidel
Co-founder & CTO
ExMachina

[email protected]
+33 (0)6 89 63 83 68