Handling an elf kernel dump with a randomized base
Subsystems (2)
I have been working on getting kernels on different architectures with randomized base operational. One problem I've run into is that kernel dumps taken this way are not debuggable with gdb, the symbols are, of course, all in the wrong places.
The way gdb handles relocation is to add an AT_ENTRY value in an auxv note. It holds the relocated start address and gdb uses that to figure out the offsets. This is easy enough to add if you have the information, I'm wondering the best way to do this looking at getting it into the mainstream kernel and the crash dump tools.
There is some handling of this on x86_64 with KERNELOFFSET, but it doesn't work for gdb.
I can think of two ways to add this:
* Add a vmcoreinfo value with the entry point and have the extraction tool create the elf note.
* Put the entry point in sysfs and have kexec add the note like it does for vmcoreinfo.
I'd like to avoid any solution that requires putting vmlinux or any other large file on the target system, as this is not always possible for small embedded systems.
Thanks,
-corey
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
Quoted 12 lines · Corey Minyard
I have been working on getting kernels on different architectures with randomized base operational. One problem I've run into is that kernel dumps taken this way are not debuggable with gdb, the symbols are, of course, all in the wrong places.
The way gdb handles relocation is to add an
AT_ENTRYvalue in an auxv note. It holds the relocated start address and gdb uses that to figure out the offsets. This is easy enough to add if you have the information, I'm wondering the best way to do this looking at getting it into the mainstream kernel and the crash dump tools.There is some handling of this on
x86_64with KERNELOFFSET, but it doesn't work for gdb.
Quoted 8 lines
I can think of two ways to add this:
* Add a vmcoreinfo value with the entry point and have the extraction tool create the elf note.
* Put the entry point in sysfs and have kexec add the note like it does for vmcoreinfo.
I thought of a third possibility. You could have a downstream tool that looks at the value of a symbol (like _stext) in the vmcoreinfo and the vmlinux file and adds the auxv note to the core dump. That would require no changes to anything, but would require the downstream tool.
-corey
Quoted 6 lines
I'd like to avoid any solution that requires putting vmlinux or any other large file on the target system, as this is not always possible for small embedded systems.
Thanks,
-corey
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec