iMX6q PCIe phy link never came up on kernel v4.4.x
Hi There,
Working on a custom iMX6q board I'm getting a PCIe phy link never came up, even if uboot detect everything ok. My DTS is enabling PCIe with
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie_reset>;
reset-gpio = <&gpio7 12 0>;
status = "okay";
};The PCIe is connected to a PCIe-to-PCI TI XIO2001, so I'd like to know if there is any other special setup to do in order to get it to work on a v4.4.x kernel.
Any idea?
Thanks in advance,
Roberto Fichera.
U-Boot 2014.04-imx_v2014.04_3.14.38_6qp_beta+g6e9282c (Feb 15 2016 - 10:02:31)
CPU: Freescale i.MX6Q rev1.5 at 792 MHz CPU: Temperature 35 C, calibration data: 0x5664d569 Reset cause: POR Board: Janas iMX6Q (ID:e315c064140749d4) I2C: ready DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1
*** Warning - bad CRC, using default environment
00:01.0 - 16c3:abcd - Bridge device
01:00.0 - 104c:8240 - Bridge device
02:04.0 - 1397:08b4 - Network controller
In: serial
Out: serial
Err: serialFound PFUZE100! deviceid=10,revid=21
mmc1(part 0) is current device
Net: FEC [PRIME]
Warning: failed to set MAC address
Normal Boot
....
....
[ 0.236141] PCI host bridge /soc/pcie at 0x01000000 ranges: [ 0.236162] No bus range found for /soc/pcie at 0x01000000, using [bus 00-ff] [ 0.236213] err 0x01f00000..0x01f7ffff -> 0x01f00000 [ 0.236250] IO 0x01f80000..0x01f8ffff -> 0x00000000 [ 0.236330] MEM 0x01000000..0x01efffff -> 0x01000000 -->>> [ 0.546690] imx6q-pcie 1ffc000.pcie: phy link never came up [ 0.547263] imx6q-pcie 1ffc000.pcie: PCI host bridge to bus 0000:00 [ 0.547287] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.547304] pci_bus 0000:00: root bus resource [??? 0x01f00000-0x01f7ffff flags 0x0] [ 0.547321] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.547335] pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff] [ 0.548608] PCI: bus0: Fast back to back transfers disabled [ 0.548950] PCI: bus1: Fast back to back transfers enabled [ 0.549107] pci 0000:00:00.0: BAR 0: assigned [mem 0x01000000-0x010fffff] [ 0.549137] pci 0000:00:00.0: BAR 6: assigned [mem 0x01100000-0x0110ffff pref] [ 0.549159] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.549945] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
...