Skip to contentSkip to conversation

Jethro branch

meta-selinux Philip Tricca 2 participants 3 messages Mar 2, 2016 – Mar 3, 2016

lore
Share & tools
lore
#0 lore raw

Hey all,

meta-selinux has been tracking release branches for a while but we're missing a Jethro. I've had a Jethro branch on my github fork for a bit. It's pointing at 4c75d9cbc from master with no additional changes. Both images build, boot, login and pass the basic smoke test. Seems like this may be useful to others so I'll put it up in the yocto repo as well.

If anyone tests or uses it and runs into any problems with it please let the list know.

Philip

#1 lore raw
Quoted 7 lines · Philip Tricca

Hey all,

meta-selinux has been tracking release branches for a while but we're missing a Jethro. I've had a Jethro branch on my github fork for a bit. It's pointing at 4c75d9cbc from master with no additional changes. Both images build, boot, login and pass the basic smoke test. Seems like this may be useful to others so I'll put it up in the yocto repo as well.

I've just pushed this branch. I've tested all 3 kernels in both images for basic boot / smoke tests. The root user can login and the shell ends up in the right context. The filesystem is labeled properly. Please post issues and patches to the list.

Philip

#2 lore raw

Checked jethro branch, image booting successfully, policy loads well & label file-system thanks !
used distro : poky-selinux & image: core-image-selinux

meta-yocto-bsp = "branch_jethro:b1f23d1254682866236bfaeb843c0d8aa332efc2"
meta-selinux = "branch_jethro:4c75d9cbcf1d75043c7c5ab315aa383d9b227510"

Thanks
Shrikant

Quoted 22 lines · Philip Tricca
Quoted 7 lines · Philip Tricca

Hey all,

meta-selinux has been tracking release branches for a while but we're missing a Jethro. I've had a Jethro branch on my github fork for a bit. It's pointing at 4c75d9cbc from master with no additional changes. Both images build, boot, login and pass the basic smoke test. Seems like this may be useful to others so I'll put it up in the yocto repo as well.

I've just pushed this branch. I've tested all 3 kernels in both images for basic boot / smoke tests. The root user can login and the shell ends up in the right context. The filesystem is labeled properly. Please post issues and patches to the list.

Philip

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto