kernel crash debugging
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 4 lines · Lee
Hello,
I am running kernel version '2.6.13-gentoo-r3'
Quoted 8 lines
My hardware is as follows:
- motherboard: Tyan Tiger 230T
- processors: 2 Pentium II 1.13Ghz
- memory: 1.5GBI have been having intermittent lockups for a while now.
At first, I thought it had something to do with vmware, but this is no occuring with a non-tainted kernel.
First thing I would try with those kind of faults is Memtest86, you could have some bad RAM or bad memory timing settings..
Signature · 3 lines
Robert Hancock Saskatoon, SK, Canada To email, remove "nospam" from [email protected] Home Page: http://www.roberthancock.com/
Quoted 7 lines
Quoted 7 lines
I am running kernel version '2.6.13-gentoo-r3'
My hardware is as follows:
- motherboard: Tyan Tiger 230T
- processors: 2 Pentium II 1.13Ghz
- memory: 1.5GB
Quoted 6 lines
Quoted 3 lines
I have been having intermittent lockups for a while now.
At first, I thought it had something to do with vmware, but this is no occuring with a non-tainted kernel.
First thing I would try with those kind of faults is Memtest86, you could have some bad RAM or bad memory timing settings..
I could understand that concept except for one thing:
- with 4k stacks turned on, i have the lockups
- with 4k stacks turned off, i have not had a single lock up at all.
Per an earlier email from '[email protected]', it appears that there is still an execution path in the kernel with is causing a stack overflow.
Signature · 4 lines
Lee [email protected] 14:18:50 up 4 days, 19:29, 1 user, load average: 2.80, 2.72, 2.30