Skip to contentSkip to conversation

PPC 405 walnut

U-Boot-Users raj reddy 2 participants 4 messages Sep 5, 2007 – Sep 6, 2007

lore
Share & tools
lore

raj reddy

author
#0 lore raw

My board is close to PPC405 Walnut board. But there is slight modification in the FLASH chip and SDRAM.

-> FLASH chip on my custom board is AT49BV320C (flash interface 16Bits). How do I add this ATMEL chip driver to the u-boot.
-> SDRAM controller not read from EEPROM , i want to hardcode the values of the SDRAM using the sdram_init (i.e sdram.c) function instead of the spd_sdram.c file. Do i need to change the function implimentation init_func_ram() in the board.c file.

plz throw the light to resolve.....

Regards,
Entry.

---------------------------------
Unlimited freedom, unlimited storage. Get it now
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070905/0281e7db/attachment.htm

#1 lore raw
Quoted 2 lines · In message <[email protected]> you wrote:

My board is close to PPC405 Walnut board. But there is slight modification in the FLASH chip and SDRAM.

close is not close enough. You have to do your own port.

Quoted 1 line

-> FLASH chip on my custom board is AT49BV320C (flash interface 16Bits). How do I add this ATMEL chip driver to the u-boot.

Is it CFI conform?

Quoted 1 line

-> SDRAM controller not read from EEPROM , i want to hardcode the values of the SDRAM using the sdram_init (i.e sdram.c) function instead of the spd_sdram.c file. Do i need to change the function implimentation init_func_ram() in the board.c file.

init_func_ram() is a static function in "lib_ppc/board.c" which you should keep your fingers off. it is not affected by a new board port.

Quoted 3 lines

--0-1855522460-1188986846=:51367
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

And never post HTML on this list, please!

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If a group of N persons implements a COBOL compiler,  there  will  be
N-1 passes. Someone in the group has to be the manager. - T. Cheatham
author
#2 lore raw
Quoted 8 lines · --- Wolfgang Denk

In message <[email protected]> you

Quoted 2 lines · wrote:

My board is close to PPC405 Walnut board. But

there is slight modification in the FLASH chip and SDRAM.

Quoted 8 lines

close is not close enough. You have to do your own port.

Quoted 1 line

-> FLASH chip on my custom board is AT49BV320C

(flash interface 16Bits). How do I add this ATMEL chip driver to the u-boot.

Is it CFI conform?

yes it's Command Flash Interface only. Hope i answered to you correctely....

Quoted 16 lines
Quoted 2 lines

-> SDRAM controller not read from EEPROM , i

want to hardcode the values of the SDRAM using the sdram_init (i.e sdram.c) function instead of the spd_sdram.c file. Do i need to change the function implimentation init_func_ram() in the board.c file.

init_func_ram() is a static function in "lib_ppc/board.c" which you
should keep your fingers off. it is not affected by a new board port.

Quoted 3 lines

--0-1855522460-1188986846=:51367
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

Quoted 18 lines

And never post HTML on this list, please!

Best regards,

Wolfgang Denk

Signature · 10 lines
DENX Software Engineering GmbH,     MD: Wolfgang
Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194
Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80
Email: wd at denx.de
If a group of N persons implements a COBOL compiler,
 there  will  be
N-1 passes. Someone in the group has to be the
manager. - T. Cheatham

Try the revolutionary next-gen Yahoo! Mail. Go to http://mrd.mail.yahoo.com/dc/landing

author
#3 lore raw
In reply to Wolfgang Denk
Quoted 8 lines · --- Wolfgang Denk

In message <[email protected]> you

Quoted 2 lines · wrote:

My board is close to PPC405 Walnut board. But

there is slight modification in the FLASH chip and SDRAM.

Quoted 8 lines

close is not close enough. You have to do your own port.

Quoted 1 line

-> FLASH chip on my custom board is AT49BV320C

(flash interface 16Bits). How do I add this ATMEL chip driver to the u-boot.

Is it CFI conform?

yes it Command Flash Interface only..I request someone to please throw light to comeout of this loop....

Quoted 16 lines
Quoted 2 lines

-> SDRAM controller not read from EEPROM , i

want to hardcode the values of the SDRAM using the sdram_init (i.e sdram.c) function instead of the spd_sdram.c file. Do i need to change the function implimentation init_func_ram() in the board.c file.

init_func_ram() is a static function in "lib_ppc/board.c" which you
should keep your fingers off. it is not affected by a new board port.

Quoted 3 lines

--0-1855522460-1188986846=:51367
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

Quoted 18 lines

And never post HTML on this list, please!

Best regards,

Wolfgang Denk

Signature · 10 lines
DENX Software Engineering GmbH,     MD: Wolfgang
Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194
Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80
Email: wd at denx.de
If a group of N persons implements a COBOL compiler,
 there  will  be
N-1 passes. Someone in the group has to be the
manager. - T. Cheatham

Bollywood, fun, friendship, sports and more. You name it, we have it on http://in.groups.yahoo.com