my custom SDIO card can be detected in 2.6.30 but not in 2.6.18
List,
My redpine wifi chip based custom SDIO card be detected in 2.6.30 but not in 2.6.18. Redpine reference SDIO card works well in 2.6.18.
Where should I take a look in SDIO stack that invoke probe function?
Any help will be appreciated.
---henry
Quoted 3 lines · hong zhang
List,
My redpine wifi chip based custom SDIO card be detected in 2.6.30 but not in 2.6.18.
Just use 2.6.30 then.
If you want free help from people here, you should at least consider using a kernel version that isn't absurdly old.
If you're stuck with 2.6.18 because that's what your vendor provided to you, then please go to them for support.
Nicolas
Because 2.6.14 is the latest in PXA320 package.
Do you know what command can display version of SDIO wifi device?
Quoted 31 lines · Nicolas Pitre
From: Nicolas Pitre <[email protected]>
Subject: Re: my custom SDIO card can be detected in 2.6.30 but not in 2.6.18
To: "hong zhang" <[email protected]>
Cc: [email protected]
Date: Saturday, September 4, 2010, 12:51 AMQuoted 3 lines · hong zhang
List,
My redpine wifi chip based custom SDIO card be
detected in 2.6.30 but not in 2.6.18.
Just use 2.6.30 then.
If you want free help from people here, you should at least consider
using a kernel version that isn't absurdly old.If you're stuck with 2.6.18 because that's what your vendor provided to
you, then please go to them for support.Nicolas
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 1 line · hong zhang
Because 2.6.14 is the latest in PXA320 package.
Please ask Marvell for help then. We do not support their package here.
Nicolas