enable 802.11h and 802.11d in IBSS mode
Hi all,
I'm using ath10k in IBSS with 2 wireless cards based on qca988x.
How can I enable DFS (802.11h AND 802.11d) in IBSS mode (I mean there's not hostapd.conf file)?
Kernel is 4.2.0+ from CT and firmware is 10.1.467-ct-com-full-014-96d543.
Thanks,
Jose
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 4 lines · Jose Nunez-Martinez (CTTC)
Hi all,
I'm using ath10k in IBSS with 2 wireless cards based on qca988x.
How can I enable DFS (802.11h AND 802.11d) in IBSS mode (I mean there's not hostapd.conf file)?
As I understand, IBSS is using wpa_supplicant and wpa_supplicant does not have DFS feature at this moment.
Thanks,
Peter
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
I'm not using wpa_supplicant. I'm directly using "iw" commands to configure the wireless cards.
Regards,
Jose
Quoted 15 lines · Peter Oh
Quoted 4 lines · Jose Nunez-Martinez (CTTC)
Hi all,
I'm using ath10k in IBSS with 2 wireless cards based on qca988x.
How can I enable DFS (802.11h AND 802.11d) in IBSS mode (I mean there's not hostapd.conf file)?As I understand, IBSS is using
wpa_supplicantandwpa_supplicantdoes not have DFS feature at this moment.Thanks,
Peter_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Signature · 14 lines
Jose Núñez-Martínez, PhD Senior Researcher email: [email protected] COMNET Division Web: http://networks.cttc.cat Centre Tecnològic de Telecomunicacions de Catalunya (CTTC) Parc Mediterrani de la Tecnologia Av. Carl Friedrich Gauss, 7 Ph.:+34 936452927 08860 Castelldefels - Barcelona Fax: +34 936452901 _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 2 lines · Jose Núñez-Martínez (CTTC)
I'm not using
wpa_supplicant. I'm directly using "iw" commands to configure the wireless cards.
I don't think you're really supposed to do that? There'd be nothing to handle radar detection event which is pretty much in violation of regulatory laws.
Michał
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k