Skip to contentSkip to conversation

ath10k IBSS and A-MSDU throuput

DISCUSSION Harms, Hannes 2 participants 4 messages Apr 29, 2016 Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore
#0 lore raw

Hi everyone,

I have set up two Compex WLE900 in ad-hoc mode, 80MHz channel width, channel 100.
I am using kernel 3.17 from Gateworks for imx6 and
my own compat_wirless (4.4.2) with all patches from Candela for ath10k and all patches for mac80211 from the Candela 4.4 kernel tree.

The upload for TCP is about 200 MBit/s and the download is about 250 MBit/s, tested with iperf3.

Now I am trying to enable A-MSDU as described in the firmware release 10.1.467-ct-15 from Candela, but I can not measure anydifference in throughput.

Could anyone confirm that A-MSDU is really working with IBSS?

Best Regards
Hannes

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#1 lore raw
Quoted 7 lines · Hannes

Hi everyone,

I have set up two Compex WLE900 in ad-hoc mode, 80MHz channel width, channel 100.
I am using kernel 3.17 from Gateworks for imx6 and
my own compat_wirless (4.4.2) with all patches from Candela for ath10k and all patches for mac80211 from the Candela 4.4 kernel tree.

Quoted 6 lines

The upload for TCP is about 200 MBit/s and the download is about 250 MBit/s, tested with iperf3.

Now I am trying to enable A-MSDU as described in the firmware release 10.1.467-ct-15 from Candela, but I can not measure anydifference in throughput.

Could anyone confirm that A-MSDU is really working with IBSS?

You can sniff it and see if you can sniff amsdu frames on air?

I only tested it a bit when developing that feature for another user (who eventually decided to not use it anyway since it required linux kernel hacks to make it work), so possibly there was a regression...

Thanks,
Ben

Signature · 7 lines
Ben Greear <[email protected]>
Candela Technologies Inc  http://www.candelatech.com

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
#2 lore raw

To sniff frames on air I would need additional hardware, right?
Or maybe there is a possibility to debug in / outgoing amsdu frames in the ath10k driver? Unfortunately my kernel programming skills are very limited,
but maybe I will continue testing next week.

Thanks,
Hannes

Am 29.04.2016 um 18:21 schrieb Ben Greear:

Quoted 17 lines · Hannes
Quoted 7 lines

Hi everyone,

I have set up two Compex WLE900 in ad-hoc mode, 80MHz channel width, channel 100.
I am using kernel 3.17 from Gateworks for imx6 and
my own compat_wirless (4.4.2) with all patches from Candela for ath10k and all patches for mac80211 from the Candela 4.4 kernel tree.

Quoted 6 lines

The upload for TCP is about 200 MBit/s and the download is about 250 MBit/s, tested with iperf3.

Now I am trying to enable A-MSDU as described in the firmware release 10.1.467-ct-15 from Candela, but I can not measure anydifference in throughput.

Could anyone confirm that A-MSDU is really working with IBSS?

Quoted 9 lines

You can sniff it and see if you can sniff amsdu frames on air?

I only tested it a bit when developing that feature for another user (who eventually decided to not use it anyway since it required linux kernel hacks to make it work), so possibly there was a regression...

Thanks,
Ben

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#3 lore raw
Quoted 5 lines · Hannes Harms

To sniff frames on air I would need additional hardware, right?
Or maybe there is a possibility to debug in / outgoing amsdu frames in the ath10k driver? Unfortunately my kernel programming skills are very limited,
but maybe I will continue testing next week.

Yes, another ath10k NIC can sniff it if properly configured.

Stock firmware doesn't sniff certain frames, but the one you are using should be able to sniff everything.

Thanks,
Ben

Quoted 38 lines

Thanks,
Hannes

Am 29.04.2016 um 18:21 schrieb Ben Greear:

Quoted 17 lines · Hannes
Quoted 7 lines

Hi everyone,

I have set up two Compex WLE900 in ad-hoc mode, 80MHz channel width, channel 100.
I am using kernel 3.17 from Gateworks for imx6 and
my own compat_wirless (4.4.2) with all patches from Candela for ath10k and all patches for mac80211 from the Candela 4.4 kernel tree.

Quoted 6 lines

The upload for TCP is about 200 MBit/s and the download is about 250 MBit/s, tested with iperf3.

Now I am trying to enable A-MSDU as described in the firmware release 10.1.467-ct-15 from Candela, but I can not measure anydifference in throughput.

Could anyone confirm that A-MSDU is really working with IBSS?

Quoted 9 lines

You can sniff it and see if you can sniff amsdu frames on air?

I only tested it a bit when developing that feature for another user (who eventually decided to not use it anyway since it required linux kernel hacks to make it work), so possibly there was a regression...

Thanks,
Ben

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

Signature · 8 lines
Ben Greear <[email protected]>
Candela Technologies Inc  http://www.candelatech.com


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k