how to set u-boot in meta-machine
Hi,
I'm going to build a linux distro for LeMaker Guitar with yocto project and I've meet some problems, hope you can help me:
I refer this
page(http://www.yoctoproject.org/docs/2.1/bsp-guide/bsp-guide.html) to build a layer named 'meta-guitar' with a custom kernel source (https://github.com/LeMaker/linux-actions).
It seems nothing wrong during the building time and i get a 'meta-guitar' successfuly.
But when i try to build a image with bitbake core-image-minimal i get a error:
ERROR: u-boot-v2016.03+gitAUTOINC+df61a74e68-r0 do_compile: oe_runmake failed
ERROR: u-boot-v2016.03+gitAUTOINC+df61a74e68-r0 do_compile: Function failed: do_compile (log file is located at /home/tab/work/yocto/build/guitar/tmp/work/guitar-poky-linux-gnueabi/u-boot/v2016.03+gitAUTOINC+df61a74e68-r0/temp/log.do_compi le.16108)
and the logfile says: Configuration file ".config" not found.
It seems that I need to do something with the u-boot while building the meta-guitar?
But there's no more info about the u-boot while I'm building meta-guitar, such as the path of the u-boot source file?
How can i solve this problem?
Hope for your help.
Tab Liu
Signature · 19 lines
** * * *Tab Liu * *LeMaker ****Support * *Team * **Making Innovation Easy *. * Email: [email protected] <mailto:[email protected]> (Technical Support) [email protected] <mailto:[email protected]> (Product Distribution) Website: http://www.lemaker.org/ <http://www.lemaker.org/>
Quoted 13 lines · tab
Hi,
I'm going to build a linux distro for LeMaker Guitar with yocto project and I've meet some problems, hope you can help me:
I refer this page(http://www.yoctoproject.org/docs/2.1/bsp-guide/bsp-guide.html) to build a layer named 'meta-guitar'
with a custom
kernel source (https://github.com/LeMaker/linux-actions).
It seems nothing wrong during the building time and i get a 'meta-guitar' successfuly.
But when i try to build a image withbitbake core-image-minimali get a error:ERROR: u-boot-v2016.03+gitAUTOINC+df61a74e68-r0
do_compile:oe_runmakefailed
ERROR: u-boot-v2016.03+gitAUTOINC+df61a74e68-r0do_compile: Function failed:do_compile(log file is located at/home/tab/work/yocto/build/guitar/tmp/work/guitar-poky-linux-gnueabi/u-boot/v2016.03+gitAUTOINC+df61a74e68-r0/temp/log.do_compile.16108)
Quoted 8 lines
and the logfile says: Configuration file ".config" not found.
It seems that I need to do something with the u-boot while building the meta-guitar?
But there's no more info about the u-boot while I'm building meta-guitar, such as the path of the u-boot source file?
How can i solve this problem?
Hope for your help.Tab Liu
Try looking at some of the <MACHINE>.conf files in meta-fsl-arm where you should be able to see how to set up the U-Boot build.
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------