Skip to contentSkip to conversation

"make xconfig" fails with "No rule to make target …/qconf-moc.cc …"

PATCH Rolf Eike Beer 2 participants 2 messages Jun 24, 2024

Subsystems (2)
lore
Share & tools
lore
#0 lore raw
$ make O=~/repos/build/linux/ xconfig V=1

make -f linux/scripts/Makefile.build obj=scripts/kconfig xconfig
# HOSTCXX scripts/kconfig/qconf.o
g++ -Wp,-MMD,scripts/kconfig/.qconf.o.d -Wall -O2 -std=c++11 -fPIC -I/usr/include/qt6/QtCore -I/usr/include/qt6 -DQT_CORE_LIB -I/usr/lib64/qt6/mkspecs/linux-g++ -I/usr/include/qt6/QtGui -DQT_GUI_LIB -I/usr/include/qt6/QtWidgets -DQT_WIDGETS_LIB -std=c++17 -I ./scripts/kconfig -c -o scripts/kconfig/qconf.o linux/scripts/kconfig/qconf.cc
make[3]: *** No rule to make target 'linux/scripts/kconfig/qconf-moc.cc', needed by 'scripts/kconfig/qconf-moc.o'. Stop.

The culprit seems to be 0e912c03208075b95ea726076bf1b45db8419bc2. If I revert this like the following I'm able to do "make xconfig" again:

scripts/kconfig/Makefile +6 -6
@@ -198,22 +198,22 @@ $(addprefix $(obj)/, mconf.o $(lxdialog)): | $(obj)/mconf-cflags
 
 # qconf: Used for the xconfig target based on Qt
 hostprogs      += qconf
-qconf-cxxobjs  := qconf.o qconf-moc.o
+qconf-cxxobjs  := qconf.o
 qconf-objs     := images.o $(common-objs)
 
 HOSTLDLIBS_qconf         = $(call read-file, $(obj)/qconf-libs)
 HOSTCXXFLAGS_qconf.o     = -std=c++11 -fPIC $(call read-file, $(obj)/qconf-cflags)
-HOSTCXXFLAGS_qconf-moc.o = -std=c++11 -fPIC $(call read-file, $(obj)/qconf-cflags)
 $(obj)/qconf: | $(obj)/qconf-libs
-$(obj)/qconf.o $(obj)/qconf-moc.o: | $(obj)/qconf-cflags
+$(obj)/qconf.o: | $(obj)/qconf-cflags
+$(obj)/qconf.o: $(obj)/qconf.moc
 
 quiet_cmd_moc = MOC     $@
-      cmd_moc = $(call read-file, $(obj)/qconf-bin)/moc $< -o $@
+      cmd_moc = $(call read-file, $(obj)/qconf-bin)/moc -i $< -o $@
 
-$(obj)/qconf-moc.cc: $(src)/qconf.h FORCE | $(obj)/qconf-bin
+$(obj)/%.moc: $(src)/%.h FORCE | $(obj)/qconf-bin
        $(call if_changed,moc)
 
-targets += qconf-moc.cc
+targets += qconf.moc
 
 # gconf: Used for the gconfig target based on GTK+
 hostprogs      += gconf
scripts/kconfig/qconf.cc +1 -0
index c6c42c0f4e5d..283b427f4321 100644
@@ -25,6 +25,7 @@
 #include "lkc.h"
 #include "qconf.h"
 
+#include "qconf.moc"
 #include "images.h"
 
 

I don't think this is the proper solution, but at least it works. I hope you find a better way to fix this.

Regards,

Eike

Signature · 13 lines
Rolf Eike Beer

emlix GmbH
Headquarters: Berliner Str. 12, 37073 Göttingen, Germany
Phone +49 (0)551 30664-0, e-mail [email protected]
District Court of Göttingen, Registry Number HR B 3160
Managing Directors: Heike Jordan, Dr. Uwe Kracke
VAT ID No. DE 205 198 055
Office Berlin: Panoramastr. 1, 10178 Berlin, Germany
Office Bonn: Bachstr. 6, 53115 Bonn, Germany
http://www.emlix.com

emlix - your embedded Linux partner
#1 lore raw
Quoted 6 lines · Rolf Eike Beer
$ make O=~/repos/build/linux/ xconfig V=1

make -f linux/scripts/Makefile.build obj=scripts/kconfig xconfig
# HOSTCXX scripts/kconfig/qconf.o
g++ -Wp,-MMD,scripts/kconfig/.qconf.o.d -Wall -O2 -std=c++11 -fPIC -I/usr/include/qt6/QtCore -I/usr/include/qt6 -DQT_CORE_LIB -I/usr/lib64/qt6/mkspecs/linux-g++ -I/usr/include/qt6/QtGui -DQT_GUI_LIB -I/usr/include/qt6/QtWidgets -DQT_WIDGETS_LIB -std=c++17 -I ./scripts/kconfig -c -o scripts/kconfig/qconf.o linux/scripts/kconfig/qconf.cc
make[3]: *** No rule to make target 'linux/scripts/kconfig/qconf-moc.cc', needed by 'scripts/kconfig/qconf-moc.o'. Stop.

Thanks for your report. I can reproduce it and bisect led me to commit b1992c3772e6 ("kbuild: use $(src) instead of $(srctree)/$(src) for source directory", 2024-04-27). We missed to adjust the host-cxxobjs rule appropriately; this should fix the issue with less effort:

scripts/Makefile.host +1 -1
index d35f55e0d141..e85be7721a48 100644
@@ -146,5 +146,5 @@ $(call multi_depend, $(host-cxxmulti), , -objs -cxxobjs)
 # Create .o file from a single .cc (C++) file
 quiet_cmd_host-cxxobjs = HOSTCXX $@
       cmd_host-cxxobjs = $(HOSTCXX) $(hostcxx_flags) -c -o $@ $<
-$(host-cxxobjs): $(obj)/%.o: $(src)/%.cc FORCE
+$(host-cxxobjs): $(obj)/%.o: $(obj)/%.cc FORCE
        $(call if_changed_dep,host-cxxobjs)

I am going to send a proper patch.

Kind regards,
Nicolas

Quoted 66 lines

The culprit seems to be 0e912c03208075b95ea726076bf1b45db8419bc2. If I revert this like the following I'm able to do "make xconfig" again:

scripts/kconfig/Makefile +6 -6
@@ -198,22 +198,22 @@ $(addprefix $(obj)/, mconf.o $(lxdialog)): | $(obj)/mconf-cflags
 
 # qconf: Used for the xconfig target based on Qt
 hostprogs      += qconf
-qconf-cxxobjs  := qconf.o qconf-moc.o
+qconf-cxxobjs  := qconf.o
 qconf-objs     := images.o $(common-objs)
 
 HOSTLDLIBS_qconf         = $(call read-file, $(obj)/qconf-libs)
 HOSTCXXFLAGS_qconf.o     = -std=c++11 -fPIC $(call read-file, $(obj)/qconf-cflags)
-HOSTCXXFLAGS_qconf-moc.o = -std=c++11 -fPIC $(call read-file, $(obj)/qconf-cflags)
 $(obj)/qconf: | $(obj)/qconf-libs
-$(obj)/qconf.o $(obj)/qconf-moc.o: | $(obj)/qconf-cflags
+$(obj)/qconf.o: | $(obj)/qconf-cflags
+$(obj)/qconf.o: $(obj)/qconf.moc
 
 quiet_cmd_moc = MOC     $@
-      cmd_moc = $(call read-file, $(obj)/qconf-bin)/moc $< -o $@
+      cmd_moc = $(call read-file, $(obj)/qconf-bin)/moc -i $< -o $@
 
-$(obj)/qconf-moc.cc: $(src)/qconf.h FORCE | $(obj)/qconf-bin
+$(obj)/%.moc: $(src)/%.h FORCE | $(obj)/qconf-bin
        $(call if_changed,moc)
 
-targets += qconf-moc.cc
+targets += qconf.moc
 
 # gconf: Used for the gconfig target based on GTK+
 hostprogs      += gconf
scripts/kconfig/qconf.cc +1 -0
index c6c42c0f4e5d..283b427f4321 100644
@@ -25,6 +25,7 @@
 #include "lkc.h"
 #include "qconf.h"
 
+#include "qconf.moc"
 #include "images.h"
 
 

I don't think this is the proper solution, but at least it works. I hope you find a better way to fix this.

Regards,

Eike

Signature · 13 lines
Rolf Eike Beer

emlix GmbH
Headquarters: Berliner Str. 12, 37073 Göttingen, Germany
Phone +49 (0)551 30664-0, e-mail [email protected]
District Court of Göttingen, Registry Number HR B 3160
Managing Directors: Heike Jordan, Dr. Uwe Kracke
VAT ID No. DE 205 198 055
Office Berlin: Panoramastr. 1, 10178 Berlin, Germany
Office Bonn: Bachstr. 6, 53115 Bonn, Germany
http://www.emlix.com

emlix - your embedded Linux partner
Signature · 1 line
Nicolas Schier