i2c: i801: Stop using pm_runtime_set_autosuspend_delay(-1)
PATCH 1/1 i2c: i801: Stop using pm_runtime_set_autosuspend_delay(-1)
The original change works as intended, but Andy pointed in [0] that now userspace could re-enable RPM via sysfs, even though we explicitly want to disable it. So effectively revert the original patch, just with small improvements:
- Calls to pm_runtime_allow()/pm_runtime_forbid() don't have to be balanced, so we can remove the call to pm_runtime_forbid() in i801_remove().
- priv->acpi_reserved is accessed after i801_acpi_remove(), and according to Robert [1] the custom handler can't run any longer. Therefore we don't have to take priv->acpi_lock.
[0] https://www.spinics.net/lists/linux-i2c/msg52730.html
[1] https://lore.kernel.org/linux-acpi/BYAPR11MB32561D19A0FD9AB93E2B1E5287D39@BYAPR11MB3256.namprd11.prod.outlook.com/T/#t
--- drivers/i2c/busses/i2c-i801.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/i2c/busses/i2c-i801.c +5 -4
@@ -1623,7 +1623,7 @@ i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits,* BIOS is accessing the host controller so prevent it from * suspending automatically from now on. */ -pm_runtime_set_autosuspend_delay (&pdev->dev,-1 ); +pm_runtime_get_sync (&pdev->dev); }if ((function &ACPI_IO_MASK ) ==ACPI_READ )
@@ -1890,9 +1890,6 @@ static void i801_remove(struct pci_dev *dev) {struct i801_priv *priv =pci_get_drvdata (dev); -pm_runtime_forbid (&dev->dev); -pm_runtime_get_noresume (&dev->dev); -i801_disable_host_notify (priv);i801_del_mux (priv);i2c_del_adapter (&priv->adapter);
@@ -1901,6 +1898,10 @@ static void i801_remove(struct pci_dev *dev)platform_device_unregister (priv->tco_pdev); +/* if acpi_reserved is set then usage_count is incremented already */ +if (!priv->acpi_reserved) +pm_runtime_get_noresume (&dev->dev); +/* * do not call pci_disable_device(dev) since it can cause hard hangs on * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010)
Signature · 1 line
2.33.0