Error in Masquerade ??
Hello Jorge !
Thanks for the response.
When i have a fixed ip i can use SNAT, but i have some dsl links with dynamic ip so i can't use SNAT :-(
Leandro
-------
Leandro:
You need another rule to alter the source ip address of the outgoing packets.
iptables -t nat -A POSTROUTING -o eth0 \ -j SNAT --to-source <server_address>
iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
Jorge.
Quoted 10 lines · Leandro Silva
I have the following rule in my firewall:
iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE And that's the only rule if postrouting chain. It's working fine but from time to time a packet leaves the server with the original ip and not with the server's. It's happening like 1 "wrong" packet for 100 or 200 ok. I've tried in other servers with same results and different "Mandrakes" ( 9.1, 10,1 and 2006.0 ). And different cpus ( p3, p4, amd, all with 512 mb ram ).
Any ideias ?
Quoted 3 lines
Thanks a lot
Leandro
--
Jorge Isaac Davila Lopez
Nicaragua Open Source
+505 808 2478
[email protected]
Quoted 7 lines · Leandro Silva
Hello Jorge !
Thanks for the response.
When i have a fixed ip i can use SNAT, but i have some dsl links with dynamic ip so i can't use SNAT :-(Leandro
If you have a ppp adapter you need MASQUERADE.
If you have DSL with a static or "dynamic" (dynamically assigned, but it doesn't change) IP address on an eth interface you can still use SNAT. E.g. I have a DSL line which assignes a static IP address. I use SNAT.
Quoted 8 lines
-------
Leandro:You need another rule to alter the source ip address of the outgoing packets.
iptables -t nat -A POSTROUTING -o eth0 \ -j SNAT --to-source <
server_address>iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
You do *not* need both rules.
Gr,
Rob
Quoted 13 lines · Leandro Silva
Quoted 12 lines
I have the following rule in my firewall:
iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE And that's the only rule if postrouting chain. It's working fine but from time to time a packet leaves the server with the original ip and not with the server's. It's happening like 1 "wrong" packet for 100 or 200 ok. I've tried in other servers with same results and different "Mandrakes" ( 9.1, 10,1 and 2006.0 ). And different cpus ( p3, p4, amd, all with 512 mb ram ).
Any ideias ?Thanks a lot
Leandro