PowerTOP v2.6.1 released
Alexandra Yates
We are pleased to announce the release of PowerTOP v2.6.1
About PowerTOP
PowerTOP is a Linux tool to diagnose issues with power consumption and power management. In addition to being a diagnostic tool, PowerTOP also has an interactive mode you can use to experiment with various power management settings, for cases where the Linux distribution has not enabled those settings.
PowerTOP reports which components in the system are most likely to blame for higher-than-needed power consumption, ranging from software applications to active components in the system. Detailed screens are available for CPU C and P states, device activity, and software activity.
For many years, PowerTOP has been used heavily by Intel, Linux distributors, and various parts of the open source community.
Fixes
Segmentation faults with PowerTOP2.6 reported by Julian Wollrath <jwollrath(a)web.de>
Packaging issues reported by Julian Wollrath <jwollrath(a)web.de> Thank you to everyone who contributed to this release!
Alexandra Yates (3):
Bug-fix:Seg-fault with powertop --html & --csv
Update translation files and configuration
PowerTOP version 2.6.1
Thank you,
Alexandra.
Jaroslav Skarvada
----- Original Message -----
Quoted 37 lines
We are pleased to announce the release of PowerTOP v2.6.1
About PowerTOP
PowerTOP is a Linux tool to diagnose issues with power consumption and power management. In addition to being a diagnostic tool, PowerTOP also has an interactive mode you can use to experiment with various power management settings, for cases where the Linux distribution has not enabled those settings.
PowerTOP reports which components in the system are most likely to blame for higher-than-needed power consumption, ranging from software applications to active components in the system. Detailed screens are available for CPU C and P states, device activity, and software activity.
For many years, PowerTOP has been used heavily by Intel, Linux distributors, and various parts of the open source community.
Fixes
Segmentation faults with PowerTOP2.6 reported by Julian Wollrath <jwollrath(a)web.de>
Packaging issues reported by Julian Wollrath <jwollrath(a)web.de> Thank you to everyone who contributed to this release!Alexandra Yates (3):
Bug-fix:Seg-fault with powertop --html & --csv
Update translation files and configuration
PowerTOP version 2.6.1
Quoted 7 lines
Thank you,
Alexandra.
_______________________________________________
PowerTop mailing list
PowerTop(a)lists.01.org
https://lists.01.org/mailman/listinfo/powertop
Hi,
the source tarball contains 32 bit object files under /src/tuning
Also it is not possible to compile it after running:
$ make clean
It seems csstoh.sh script is missing
regards
Jaroslav
Alexandra Yates
Quoted 53 lines
----- Original Message -----
Quoted 38 lines
We are pleased to announce the release of PowerTOP v2.6.1
About PowerTOP
PowerTOP is a Linux tool to diagnose issues with power consumption and power management. In addition to being a diagnostic tool, PowerTOP also has an interactive mode you can use to experiment with various power management settings, for cases where the Linux distribution has not enabled those settings.
PowerTOP reports which components in the system are most likely to blame for higher-than-needed power consumption, ranging from software applications to active components in the system. Detailed screens are available for CPU C and P states, device activity, and software activity.
For many years, PowerTOP has been used heavily by Intel, Linux distributors, and various parts of the open source community.
Fixes
Segmentation faults with PowerTOP2.6 reported by Julian Wollrath <jwollrath(a)web.de>
Packaging issues reported by Julian Wollrath <jwollrath(a)web.de> Thank you to everyone who contributed to this release!Alexandra Yates (3):
Bug-fix:Seg-fault with powertop --html & --csv
Update translation files and configuration
PowerTOP version 2.6.1
Quoted 7 lines
Thank you,
Alexandra.
_______________________________________________
PowerTop mailing list
PowerTop(a)lists.01.org
https://lists.01.org/mailman/listinfo/powertopHi,
the source tarball contains 32 bit object files under /src/tuning
Quoted 9 lines
Also it is not possible to compile it after running:
$ make cleanIt seems
csstoh.shscript is missingregards
Jaroslav
Hi Jaroslav,
Thank you for reporting this bug. This bug has been in PowerTOP for a while. I tested PowerTOP-2.5 and I was able to reproduce it as well.
Nevertheless, the bug needs to be fixed. I'm adding this issue to our list of bugs to fix it in a future release.
Thank you,
Alexandra.
Joerg Mayer
Quoted 4 lines · Alexandra Yates
Quoted 4 lines
Also it is not possible to compile it after running:
$ make cleanIt seems
csstoh.shscript is missing
I've had this patch in my tree for at least some months...
Ciao
Jörg
Signature · 3 lines
Joerg Mayer <jmayer(a)loplof.de> We are stuck with technology when what we really want is just stuff that works. Some say that should read Microsoft instead of technology.
Fix build in a clean tree
src/Makefile.am +1 -1
@@ -50,5 +50,5 @@ AM_LDFLAGS = $(LIBS) $(NCURSES_LIBS) $(PCIUTILS_LIBS) $(LIBNL_LIBS) $(LIBZ_LIBS) BUILT_SOURCES = css.h CLEANFILES = css.h css.h: powertop.css - $(SHELL) ./csstoh.sh powertop.css css.h + $(SHELL) ${srcdir}/csstoh.sh ${srcdir}/powertop.css css.h
Alexandra Yates
Quoted 9 lines · Alexandra Yates
Quoted 4 lines
Quoted 4 lines
Also it is not possible to compile it after running:
$ make cleanIt seems
csstoh.shscript is missingI've had this patch in my tree for at least some months...
Quoted 11 lines
Ciao
Jörg
--
Joerg Mayer <jmayer(a)loplof.de>
We are stuck with technology when what we really want is just stuff that works. Some say that should read Microsoft instead of technology.
_______________________________________________
PowerTop mailing list
PowerTop(a)lists.01.org
https://lists.01.org/mailman/listinfo/powertop
Hi Joerg,
Can you send the patch to the mailing list?
Thank you,
Alexandra.
Chris Samuel
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 1 line · Alexandra Yates
Can you send the patch to the mailing list?
There was a patch attached to his email.
cheers,
Chris
- --
Chris Samuel : http://www.csamuel.org/ : Melbourne, VIC
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEVAwUBU4luwI1yjaOTJg85AQIdwgf/bEBkIciB+1Scpq+rOBC+0TU5qXez6ZlT Bl5zyHtEFiJs8ce2DxxwrQInM7+hrsKcWZup0t4rL85sEHkjmzd+ijDh37EP9bW5 GXmj3pAG+tySFtZVJeDzn5XIia5ZGGVwR5O4pkEhmBUPB/u06TA7+LoCnp5YGy9Y cynVc7fthL4WI6Scac0kcVA08l5ISHnujajOLhT8/A95aqx6rwqMeeM2Jf1GDa7c rU2ZGgAffeM8MavXzsBiHe1NVv1l+uHV4OlNRdwWaPAHHGCgcj8+piCmcUFKd9i7 /RT5cy4O5jMug4YuMgh8L4Eo9aDQwZI4jPZtUtuV1lI/1NNdxog29Q== =U6Rp
-----END PGP SIGNATURE-----
Joerg Mayer
[Powertop] Fix out of tree builds [Was: PowerTOP v2.6.1 released]
In reply to Alexandra YatesQuoted 9 lines · Alexandra Yates
Quoted 7 lines · Alexandra Yates
Quoted 4 lines
Quoted 4 lines
Also it is not possible to compile it after running:
$ make cleanIt seems
csstoh.shscript is missingI've had this patch in my tree for at least some months...
Can you send the patch to the mailing list?
I verified that I did attach it. For people who prefer inline patches find a regenerated version below. Btw, to find out about problems with the source: Please run "make distcheck" before doing a release - which will currently fail due to the included object files.
Ciao
Jörg
Quoted 1 line
From
22a76b66041f27017de302ae5650ec973471a01aMon Sep 17 00:00:00 2001
From: Joerg Mayer <jmpt(a)loplof.de>
Date: Sun, 1 Jun 2014 09:36:17 +0200
Subject: [PATCH] Fix out of tree builds
--- src/Makefile.am | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
src/Makefile.am +1 -1
@@ -50,5 +50,5 @@ AM_LDFLAGS = $(LIBS) $(NCURSES_LIBS) $(PCIUTILS_LIBS) $(LIBNL_LIBS) $(LIBZ_LIBS) BUILT_SOURCES = css.h CLEANFILES = css.h css.h: powertop.css - $(SHELL) ./csstoh.sh powertop.css css.h + $(SHELL) ${srcdir}/csstoh.sh ${srcdir}/powertop.css css.h
Signature · 6 lines
1.8.4.5 -- Joerg Mayer <jmayer(a)loplof.de> We are stuck with technology when what we really want is just stuff that works. Some say that should read Microsoft instead of technology.
Joerg Mayer
[Powertop] Fix packaging extra files in src/tuning/ [Was: PowerTOP v2.6.1 released]
Quoted 3 lines
find a regenerated version below. Btw, to find out about problems with the source: Please run "make distcheck" before doing a release - which will currently fail due to the included object files.
OK, while I'm at it: Fix the extra files in src/tuning/ as well. With this an the previous patch applied "make distcheck" succeeds on my system.
Ciao
Jörg
Quoted 1 line
From
86f48b0eaf6b7128b70f96b47c1e176142eb7402Mon Sep 17 00:00:00 2001
From: Joerg Mayer <jmpt(a)loplof.de>
Date: Sun, 1 Jun 2014 10:06:35 +0200
Subject: [PATCH] Don't add the complete content of src/tuning/ when packaging
the source.
--- src/Makefile.am | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
src/Makefile.am +1 -1
@@ -18,7 +18,7 @@ powertop_SOURCES = parameters/persistent.cpp parameters/learn.cpp parameters/par devices/thinkpad-light.cpp devices/ahci.h devices/i915-gpu.h devices/network.h \ devices/rfkill.cpp devices/alsa.h devices/thinkpad-fan.h devices/device.h \ devices/usb.h devices/backlight.h devices/backlight.cpp devices/runtime_pm.h \ - devices/thinkpad-light.h devices/network.cpp lib.h tuning \ + devices/thinkpad-light.h devices/network.cpp lib.h \ tuning/bluetooth.cpp tuning/tuning.cpp tuning/tuningusb.cpp \ tuning/ethernet.cpp tuning/bluetooth.h tuning/tuning.h tuning/ethernet.h \ tuning/tunable.cpp tuning/nl80211.h tuning/iw.c tuning/wifi.cpp tuning/tuningsysfs.h \
Signature · 6 lines
1.8.4.5 -- Joerg Mayer <jmayer(a)loplof.de> We are stuck with technology when what we really want is just stuff that works. Some say that should read Microsoft instead of technology.