Skip to contentSkip to conversation

howto make SNAT preserve translation ip for all connectionsfromthe same internal ip

DISCUSSION Попов Игорь Николаевич 1 participant 1 message Jun 30, 2007 1 message not in the archive

lore
Share & tools
lore
#1 lore raw
In reply to a message not in the archive

Hello, Jorge Davila
Сб, 30.06.2007 16:21:27 you wrote:

JD> Well, is not enough add
JD> -s 192.168.0.0/24
JD> to the rule?
JD> Jorge DГ║vila.

No, I want that any connection (different streams) from particular ip of internal network always nated to the same external ip. Is it by default?

JD> > Hi, all.
JD> >Say, I use iptables -t nat -A POSTROUTING -p tcp -o eth0 -j SNAT --to-source JD> >194.236.50.1-194.236.50.7 for NAT. Accordingly to man:
JD> >The source IP for each stream that we open would then be allocated randomly JD> >from these (194.236.50.1-194.236.50.7), and a single stream would always use JD> >the same IP address for all packets within that stream.
JD> >
JD> >What if I want that internal ip from block 192.168.0.0/24 is always translated JD> >into the same external ip?
JD> >PF from OpenBSD does it:
JD> >
JD> > For nat and rdr rules, (as well as for the route-to, reply-to and dup-to
JD> > rule options) for which there is a single redirection address which has
JD> >a

JD> >     subnet mask smaller than 32 for IPv4 or 128 for IPv6 (more than one IP
JD> >     address), a variety of different methods for assigning this address can
JD> >     be used:

JD> >
JD> > bitmask
JD> > The bitmask option applies the network portion of the redirection
JD> > address to the address to be modified (source with nat,
JD> >destination
JD> > with rdr).
JD> >
JD> > random
JD> > The random option selects an address at random within the defined
JD> > block of addresses.
JD> >
JD> > source-hash
JD> > The source-hash option uses a hash of the source address to deter-
JD> > mine the redirection address, ensuring that the redirection
JD> >address

JD> >           is always the same for a given source.  An optional key can be
JD> >           specified after this keyword either in hex or as a string; by de-
JD> >           fault pfctl(8) randomly generates a key for source-hash every time
JD> >           the ruleset is reloaded.

JD> >
JD> > round-robin
JD> > The round-robin option loops through the redirection address(es).
JD> >
JD> > When more than one redirection address is specified, round-robin
JD> >is
JD> > the only permitted pool type.
JD> >
JD> > static-port
JD> > With nat rules, the static-port option prevents pf(4) from modify-
JD> > ing the source port on TCP and UDP packets.
JD> >

JD> >     Additionally, the sticky-address option can be specified to help ensure
JD> >     that multiple connections from the same source are mapped to the same
JD> >     redirection address.  This option can be used with the random and round-
JD> >     robin pool options.  Note that by default these associations are de-
JD> >     stroyed as soon as there are no longer states which refer to them; in 

JD> >or-
JD> > der to make the mappings last beyond the lifetime of the states,
JD> >increase
JD> > the global options with set timeout src.track. See STATEFUL TRACKING
JD> > OPTIONS for more ways to control the source tracking.
JD> >
JD> >
JD> --
JD> Jorge Isaac Davila Lopez
JD> Nicaragua Open Source
JD> +505 430 5462
JD> [email protected]

Igor Popov <[email protected]>
icq 241601876
jid [email protected]

__________
www.newmail.ru -- всегда что-то новое.