tlbentry for U3 bit
I am using ppc440 based board. I have
added one tlbentry in init.S for memctrl register with U3 bit enable.
When I check the tlb entry through BDI I found that U3 bit is disabled.
?
I have done the same thing usingchange_tlb then I have seen U3 bit enabled through BDI.
?
Please let me know
Is there any limitation of init.S for setting tlbenty with U3 bit enable? -Ronny
Send free SMS to your Friends on Mobile from your Yahoo! Messenger. Download Now! http://messenger.yahoo.com/download.php
Hi Ronny,
Quoted 6 lines · On Monday 19 April 2010 12:42:29 Ronny D wrote:
I am using ppc440 based board. I have
added one tlbentry ininit.Sfor memctrl register with U3 bit enable.When I check the tlb entry through BDI I found that U3 bit is disabled.
Quoted 7 lines
I have done the same thing using
change_tlbthen I have seen U3 bit enabled through BDI.Please let me know
Is there any limitation of initS for setting tlbenty with U3 bit enable?
Take a look at the "tlbentry" macro (arch/ppc/include/mmu.h). As you can see, the TLB2 macro does not allow changing any of the Ux bits:
#define tlbentry(epn,sz,rpn,erpn,attr)\ .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
#define TLB2(a) ((a) & 0x00000fbf)
So you need to change TLB2 if you need to set those Ux bits.
BTW: The PPC440 users manual mentions that the U3 storage attribute has no effect on PPC440. So I'm wondering what you are trying to achieve by setting this bit.
Cheers,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de