【BUG】The kernel start fail when enable CONFIG_ARM64_LSE_ATOMICS and KCOV_INSTRUMENT_ALL
Hi,
I try to start the kernel(v4.14.0-rc4) by qemu while enable CONFIG_ARM64_LSE_ATOMICS and KCOV_INSTRUMENT_ALL(use arch/arm64/configs/defconfig) at the same time. Then
it hang:
qemu-system-aarch64 -kernel Image -m 2048 -smp 8 -initrd qemu-le.rootfs -cpu cortex-a57 -nographic -machine virt,kernel_irqchip=on -append 'console=ttyAMA0 root=/dev/ram rdinit=/sbin/init nohz_full=1 earlycon=pl011,0x9000000' -rtc base=localtime -device virtio-net-device,netdev=net0 -netdev type=tap,id=net0,script=no,downscript=no,ifname=tap2
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.0-rc4 #24 SMP PREEMPT Mon Oct 16 11:02:11 CST 2017 [ 0.000000] Boot CPU: AArch64 Processor [411fd070] [ 0.000000] Machine model: linux,dummy-virt [ 0.000000] earlycon: pl11 at MMIO 0x0000000009000000 (options '') [ 0.000000] bootconsole [pl11] enabled [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x00000000bc000000
After I try kernel v4.13 and it's the same result.
I trace the code and find it stop at the end of '__init_single_page(page, pfn, zone, nid)' in memmap_init_zone() of mm/page_alloc.c ?
static void __meminit __init_single_page(struct page *page, unsigned long pfn,
unsigned long zone, int nid)
{
set_page_links(page, zone, nid, pfn);
init_page_count(page);
page_mapcount_reset(page);
page_cpupid_reset_last(page);
INIT_LIST_HEAD(&page->lru);#ifdef WANT_PAGE_VIRTUAL
/* The shift won't overflow because ZONE_NORMAL is below 4G. */
if (!is_highmem_idx(zone))
set_page_address(page, __va(pfn << PAGE_SHIFT));#endif
// printk("stop here\n");
}
Anyone can give me advice?
Thanks,
Bixuan Cui
Quoted 1 line · Bixuan Cui
Hi,
Hi,
Quoted 12 lines
I try to start the kernel(v4.14.0-rc4) by qemu while enable
CONFIG_ARM64_LSE_ATOMICSandKCOV_INSTRUMENT_ALL(use arch/arm64/configs/defconfig)at the same time. Then
it hang:
qemu-system-aarch64 -kernel Image -m 2048 -smp 8 -initrd qemu-le.rootfs -cpu cortex-a57 -nographic -machine virt,kernel_irqchip=on -append 'console=ttyAMA0 root=/dev/ram rdinit=/sbin/init nohz_full=1 earlycon=pl011,0x9000000' -rtc base=localtime -device virtio-net-device,netdev=net0 -netdev type=tap,id=net0,script=no,downscript=no,ifname=tap2[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.0-rc4 #24 SMP PREEMPT Mon Oct 16 11:02:11 CST 2017 [ 0.000000] Boot CPU: AArch64 Processor [411fd070] [ 0.000000] Machine model: linux,dummy-virt [ 0.000000] earlycon: pl11 at MMIO 0x0000000009000000 (options '') [ 0.000000] bootconsole [pl11] enabled [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x00000000bc000000
This is a known issue [1,2] that's being worked on at the moment.
The problem is that the out-of-line LL/SC atomics are built with a special ABI, but KCOV inserts calls to other code that does not follow this ABI, resulting in register corruption.
When I saw this happen, this resulted in cmpxchg() spuriously failing somewhere in the page init code, which looks similar to what you're seeing.
The patch at [1] is sufficient to work around this for the time being.
Thanks,
Mark.
[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2017-September/533105.html
[2] http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/537018.html
Quoted 32 lines
After I try kernel v4.13 and it's the same result.
I trace the code and find it stop at the end of '__init_single_page(page, pfn, zone, nid)' inmemmap_init_zone()ofmm/page_alloc.c?static void
__meminit__init_single_page(struct page *page, unsigned long pfn,
unsigned long zone, int nid){ set_page_links(page, zone, nid, pfn); init_page_count(page); page_mapcount_reset(page); page_cpupid_reset_last(page); INIT_LIST_HEAD(&page->lru);#ifdef WANT_PAGE_VIRTUAL /* The shift won't overflow because ZONE_NORMAL is below 4G. */ if (!is_highmem_idx(zone)) set_page_address(page, __va(pfn << PAGE_SHIFT));#endif
//printk("stop here\n");
}Anyone can give me advice?
Thanks,
Bixuan Cui_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 11 lines
This is a known issue [1,2] that's being worked on at the moment.
The problem is that the out-of-line LL/SC atomics are built with a special ABI, but KCOV inserts calls to other code that does not follow this ABI, resulting in register corruption.
When I saw this happen, this resulted in
cmpxchg()spuriously failing somewhere in the page init code, which looks similar to what you're seeing.The patch at [1] is sufficient to work around this for the time being.
Thank you for your explanation :-D .
Thanks,
Bixuan Cui
Quoted 42 lines
Thanks,
Mark.[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2017-September/533105.html
[2] http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/537018.htmlQuoted 24 lines
After I try kernel v4.13 and it's the same result.
I trace the code and find it stop at the end of '__init_single_page(page, pfn, zone, nid)' inmemmap_init_zone()ofmm/page_alloc.c?static void
__meminit__init_single_page(struct page *page, unsigned long pfn,
unsigned long zone, int nid){ set_page_links(page, zone, nid, pfn); init_page_count(page); page_mapcount_reset(page); page_cpupid_reset_last(page); INIT_LIST_HEAD(&page->lru);#ifdef WANT_PAGE_VIRTUAL /* The shift won't overflow because ZONE_NORMAL is below 4G. */ if (!is_highmem_idx(zone)) set_page_address(page, __va(pfn << PAGE_SHIFT));#endif
//printk("stop here\n");
}Anyone can give me advice?
Quoted 8 lines
Thanks,
Bixuan Cui_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel.