Suggestion for better HDMI console support

Dear kernel developers,

I experimented with Odroid C2 Linux installation and I wanted an HDMI display console. I succeeded but I needed a workaround which I report below.

My suggestion today is to implement the workaround logic inside the kernel, which should be (technically at least) easy for some of you.

I noticed that the serial console is often suggested as a highly recommended alternative for Amlogic SOC development. Maybe my suggestion would change this (making the HDMI console working out of the box).

The problem I experienced with the Odroid C2 hdmi console display
output: for unknown reason, the kernel initializes the hdmi output in a blank screen state that is exited only if the kernel receives two
requests: first to blank the (already blanked) screen and then to unblank the screen. This sequence happens if a connected keyboard is idle for 15 minutes and then touched by the user.

The workaround: I wrote a small C program that makes the two kernel requests without wait.

Here is a snapshot:

#include <sys/ioctl.h>
#include <linux/vt.h>
#include <linux/tiocl.h>

static int blank_code=TIOCL_BLANKSCREEN;
static int unblank_code=TIOCL_UNBLANKSCREEN;

int main(int argc, char *argv[])
{
int td;
td=open("/dev/tty0",O_RDWR|O_NOCTTY);

   if (td>=0) {
     ioctl(td,TIOCLINUX,&blank_code);
     ioctl(td,TIOCLINUX,&unblank_code);

}
}

My kernel version is 3.16.56 as customized to Odroid C2 by Hardkernel.

"Hope it helps!"

- Thierry Moreau

P.S. I am chasing installation hints for the Amlogic closed source libraries for X.11 support in an otherwise plain vanilla Linux innstallation (headless and server working fine). Any suggestion as sources of info?