Conexant CX23418 on Toshiba Qosmio G30
Hi everyone.
I only find this ML to report my problem. If I'm wrong, please tell me the right place.
I'm trying to get working the Conexant CX23418 DVB-T tuner found in my Toshiba Qosmio G30 computer.
I followed instruccions on https://www.linuxtv.org/wiki/index.php/Xceive_XC3028/XC2028
I got and install firmware file xc3028-v27.fw and v4l-cx23418-cpu.fw, v4l-cx23418-apu.fw, v4l-cx23418-dig.fw.
But I don't have the directory /dev/dvb/ created. So, any further test with Kaffeine or similar failed.
I used two Linux distros with the same result: Devuan 2 with kernel 4.9.0 and xubuntu-18.04.2-desktop-i386 with kernel 4.15.0.
I've read in the wiki page that: "extracts the firmware from the specific hcw85bda.sys", but I dont have such file in the original OS install of this computer; I have these files: apu400x.rom, colorcvt.ax, cpnotify.ax, cxraptor.ax, cxTVRate.dll, makoaudB400x.rom, makoaudC400x.rom, /reg_files/Nur20MCE.reg, ttv400x.cat, ttv400x.inf, ttv400x.sys, ttv400x_a.rom, ttv400x_d.rom, TVersion.xml under the "TV Tuner Driver" folder.
------------------------------------------
Output of lspci -vv:
06:09.0 Multimedia video controller: Conexant Systems, Inc. CX23418 Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio Decoder
Subsystem: Toshiba America Info Systems CX23418 Single-Chip MPEG-2
Encoder with Integrated Analog Video/Broadcast Audio Decoder
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 50000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: cx18
Kernel modules: cx18
------------------------------------------
Output of dmesg | grep "cx18\|xc2028"
[ 2.806433] cx18: Start initialization, version 1.5.1 [ 3.015404] cx18-0: Initializing card 0 [ 3.015461] cx18-0: Autodetected Toshiba Qosmio DVB-T/Analog card [ 3.015646] cx18-0: cx23418 revision 01010000 (B) [ 3.215701] cx18-0: Experimenters and photos needed for device to work well. [ 3.352511] xc2028 4-0060: creating new instance [ 3.352513] xc2028 4-0060: type set to XCeive xc2028/xc3028 tuner [ 3.353044] cx18-0: Registered device video0 for encoder MPEG (64 x 32.00 kB) [ 3.353161] cx18-0: Registered device video32 for encoder YUV (20 x 101.25 kB) [ 3.353324] cx18-0: Registered device vbi0 for encoder VBI (20 x 51984 bytes) [ 3.353422] cx18-0: Registered device video24 for encoder PCM audio (256 x 4.00 kB) [ 3.353424] cx18-0: Initialized card: Toshiba Qosmio DVB-T/Analog [ 3.353453] cx18: End initialization [ 3.355613] cx18 0000:06:09.0: firmware: direct-loading firmware xc3028-v27.fw [ 3.355619] xc2028 4-0060: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [ 3.360534] cx18-alsa: module loading... [ 3.365744] cx18 0000:06:09.0: firmware: direct-loading firmware v4l-cx23418-cpu.fw [ 3.477870] cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332 bytes) [ 3.505987] cx18 0000:06:09.0: firmware: direct-loading firmware v4l-cx23418-apu.fw [ 3.606282] cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 (141200 bytes) [ 3.612391] cx18-0: FW version: 0.0.74.0 (Release 2007/03/12) [ 3.832250] cx18 0000:06:09.0: firmware: direct-loading firmware v4l-cx23418-cpu.fw [ 3.975957] cx18 0000:06:09.0: firmware: direct-loading firmware v4l-cx23418-apu.fw [ 4.298236] cx18 0000:06:09.0: firmware: direct-loading firmware v4l-cx23418-dig.fw [ 4.564513] cx18-0 843: loaded v4l-cx23418-dig.fw firmware (16382 bytes) [ 4.587159] cx18-0 843: verified load of v4l-cx23418-dig.fw firmware (16382 bytes) [ 4.604039] xc2028 4-0060: Loading firmware for type= [ 6.165368] xc2028 4-0060: Loading firmware for type= [ 6.192842] xc2028 4-0060: Loading SCODE for type= [ 6.201782] xc2028 4-0060: Incorrect readback of firmware version. [ 6.276039] xc2028 4-0060: Error! firmware not loaded [ 6.277937] xc2028 4-0060: Error -22 while loading base firmware [ 6.352036] xc2028 4-0060: Error! firmware not loaded [ 6.353906] xc2028 4-0060: Error -22 while loading base firmware [ 6.428038] xc2028 4-0060: Error! firmware not loaded [ 6.429925] xc2028 4-0060: Error -22 while loading base firmware [ 6.504036] xc2028 4-0060: Error! firmware not loaded [ 6.505983] xc2028 4-0060: Error -22 while loading base firmware [ 6.580037] xc2028 4-0060: Error! firmware not loaded [ 6.582019] xc2028 4-0060: Error -22 while loading base firmware [ 6.656036] xc2028 4-0060: Error! firmware not loaded [ 6.657988] xc2028 4-0060: Error -22 while loading base firmware [ 6.732039] xc2028 4-0060: Error! firmware not loaded [ 6.733962] xc2028 4-0060: Error -22 while loading base firmware [ 6.808042] xc2028 4-0060: Error! firmware not loaded [ 6.809938] xc2028 4-0060: Error -22 while loading base firmware
------------------------------------------
I've a full review of this computer (in Spanish) in my site:
http://pedroreina.net/hardware/qosmio/
If you need more info, just ask.
Thank you very much for your time and work.
Sincerely.
Pedro Reina