gpio: pl061: Fix the issue failed to register the ACPI interruption
PATCH 1/1 gpio: pl061: Fix the issue failed to register the ACPI interruption
Invoke acpi_gpiochip_request_interrupts after the acpi data has been attached to the pl061 acpi node to register interruption.
Otherwise it will be failed to register interruption for the ACPI case. Because in the gpiochip_add_data_with_key, acpi_gpiochip_add is invoked after gpiochip_add_irqchip but at that time the acpi data has not been attached yet.
Tested with below steps on QEMU v4.1.0-rc3 and Linux kernel v5.3-rc4, and found pl061 interruption is missed in the /proc/interrupts:
1.
qemu-system-aarch64 \
-machine virt,gic-version=3 -cpu cortex-a57 \
-m 1G,maxmem=4G,slots=4 \
-kernel Image -initrd rootfs.cpio.gz \
-net none -nographic \
-bios QEMU_EFI.fd \
-append "console=ttyAMA0 acpi=force earlycon=pl011,0x9000000"
2. cat /proc/interrupts in the guest console:
estuary:/$ cat /proc/interrupts CPU0 2: 3228 GICv3 27 Level arch_timer 4: 15 GICv3 33 Level uart-pl011 42: 0 GICv3 23 Level arm-pmu IPI0: 0 Rescheduling interrupts IPI1: 0 Function call interrupts IPI2: 0 CPU stop interrupts IPI3: 0 CPU stop (for crash dump) interrupts IPI4: 0 Timer broadcast interrupts IPI5: 0 IRQ work interrupts IPI6: 0 CPU wake-up interrupts Err: 0
--- drivers/gpio/gpio-pl061.c | 7 +++++++ 1 file changed, 7 insertions(+)
drivers/gpio/gpio-pl061.c +7 -0
@@ -8,6 +8,7 @@* * Data sheet: ARM DDI 0190B, September 2000 */ +#include <linux/acpi.h> #include <linux/spinlock.h> #include <linux/errno.h> #include <linux/init.h>
@@ -24,6 +25,9 @@#include <linux/pinctrl/consumer.h> #include <linux/pm.h> +#include "gpiolib.h" +#include "gpiolib-acpi.h" +#define GPIODIR 0x400#define GPIOIS 0x404#define GPIOIBE 0x408
@@ -345,6 +349,9 @@ static int pl061_probe(struct amba_device *adev, const struct amba_id *id)if (ret)return ret; +if (has_acpi_companion (dev)) +acpi_gpiochip_request_interrupts (&pl061->gc); +amba_set_drvdata (adev, pl061);dev_info (dev,"PL061 GPIO chip registered\n" );
Signature · 4 lines
2.8.1 .
Hi Wei,
thanks for your patch!
This doesn't apply for my "devel" branch, can you rebase on this:
https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git/log/?h=devel
We have moved some ACPI headers around recently.
Quoted 2 lines · Wei Xu
Invoke
acpi_gpiochip_request_interruptsafter the acpi data has been attached to the pl061 acpi node to register interruption.
Makes sense.
Quoted 1 line
Fixes 04ce935c6b2a ("gpio: pl061: Pass irqchip when adding gpiochip")
I doubt this is a regression since I haven't seen anyone use this gpiochip with ACPI before.
Please rename the patch "gpio: pl061: Add ACPI support" unless you can convince me it worked without changes before.
Please include some ACPI people on review of this. From MAINTAINERS:
ACPI
M: "Rafael J. Wysocki" <[email protected]> M: Len Brown <[email protected]> L: [email protected]
I would also include Andy Shevchenko and Mika Westerberg for the GPIO aspects.
Thanks!
Linus Walleij
Quoted 35 lines · Wei Xu
Invoke
acpi_gpiochip_request_interruptsafter the acpi data has been attached to the pl061 acpi node to register interruption.Otherwise it will be failed to register interruption for the ACPI case. Because in the
gpiochip_add_data_with_key,acpi_gpiochip_addis invoked aftergpiochip_add_irqchipbut at that time the acpi data has not been attached yet.Tested with below steps on QEMU v4.1.0-rc3 and Linux kernel v5.3-rc4, and found pl061 interruption is missed in the
/proc/interrupts:
1.
qemu-system-aarch64 \(quoted diff) +0
-6-machine virt,gic-version=3 -cpu cortex-a57 \ -m 1G,maxmem=4G,slots=4 \ -kernel Image -initrd rootfs.cpio.gz \ -net none -nographic \ -bios QEMU_EFI.fd \ -append "console=ttyAMA0 acpi=force earlycon=pl011,0x9000000"2. cat
/proc/interruptsin the guest console:estuary:/$ cat /proc/interrupts CPU0 2: 3228 GICv3 27 Level arch_timer 4: 15 GICv3 33 Level uart-pl011 42: 0 GICv3 23 Level arm-pmu IPI0: 0 Rescheduling interrupts IPI1: 0 Function call interrupts IPI2: 0 CPU stop interrupts IPI3: 0 CPU stop (for crash dump) interrupts IPI4: 0 Timer broadcast interrupts IPI5: 0 IRQ work interrupts IPI6: 0 CPU wake-up interrupts Err: 0
Quoted 1 line
Fixes 04ce935c6b2a ("gpio: pl061: Pass irqchip when adding gpiochip")
Linus, I'm wondering if we can do this for all inside the GPIO library. Thoughts?
--
With Best Regards,
Andy Shevchenko
Quoted 4 lines · Andy Shevchenko
On Mon, Aug 12, 2019 at 2:30 PM Wei Xu <[email protected]> wrote:
Linus, I'm wondering if we can do this for all inside the GPIO library. Thoughts?
If it's supposed to happen exactly the same way on all ACPI-enabled gpiochips, I think it is more or less mandatory :D
We need to be sure we're not gonna have to quirks for misc variants of GPIO controllers down in the gpiolib-acpi.c as a result because some ACPI-thing is "standard not quite standard" though.
Yours,
Linus Walleij
Hi Linus,
Quoted 9 lines · Linus Walleij
Hi Wei,
thanks for your patch!
This doesn't apply for my "devel" branch, can you rebase on this:
https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git/log/?h=develWe have moved some ACPI headers around recently.
Thanks to review!
I just sent out the v2 based on that.
Quoted 12 lines · Wei Xu
Quoted 3 lines
Invoke
acpi_gpiochip_request_interruptsafter the acpi data has been attached to the pl061 acpi node to register interruption.Makes sense.
Quoted 1 line
Fixes 04ce935c6b2a ("gpio: pl061: Pass irqchip when adding gpiochip")I doubt this is a regression since I haven't seen anyone use this gpiochip with ACPI before.
Please rename the patch "gpio: pl061: Add ACPI support" unless you can convince me it worked without changes before.
In the v2, I attached the log on QEMU v3.0.0 and Linux kernel v5.2.0-rc7 and the pl061 driver can register ACPI interruption.
Based on that, I did not rename the patch but I am OK to rename it if you have any doubt.
Quoted 9 lines
Please include some ACPI people on review of this. From
MAINTAINERS:
ACPIM: "Rafael J. Wysocki" <[email protected]> M: Len Brown <[email protected]> L: [email protected]I would also include Andy Shevchenko and Mika Westerberg for the GPIO aspects.
Copied to all of them in the v2.
Thanks!
Best Regards,
Wei
Quoted 5 lines
Thanks!
Linus Walleij.