50% CPU user usage but top doesn't list any CPU unfriendly task
Hi,
on a fairly old box used as a desktop (PII 300 Mhz with 196M RAM), I observe the following strange behavior which I believe comes from the kernel.
There's a VoIP known 'P2P' closed source application running, an IP tables based firewall and a remote ssh session initiated. When using top, sorting by CPU usage, no program is using more than a couple of percent of CPU. On the other side, the total CPU user time is at around 40%, with a 1.5 load average. Memory looks OK. The machine is responsive as usual.
So I wonder why the cpu user time is at 40% without any particular program showing as using CPU in the top listing. 'Problem' was reproducible with 2.4.x and now with 2.6.8.1.
So it this a real problem or is there something that I don't understand in particular? Thanks for the insight.
Jerome
The load and the CPU useage are two separate things:
Load: Defined by a programmer on an estimate on which his program is running 100% fulltime, thus consuming little or more CPU/IO.
The interesting program you mention is the VoIP application. Is this program multithreaded and is every thread using a little bit of CPU? Than it quickly adds up to the mentioned 40%. The load is than also easily reached.
Quoted 26 lines · jerome lacoste
Hi,
on a fairly old box used as a desktop (PII 300 Mhz with 196M RAM), I observe the following strange behavior which I believe comes from the kernel.
There's a VoIP known 'P2P' closed source application running, an IP tables based firewall and a remote ssh session initiated. When using top, sorting by CPU usage, no program is using more than a couple of percent of CPU. On the other side, the total CPU user time is at around 40%, with a 1.5 load average. Memory looks OK. The machine is responsive as usual.
So I wonder why the cpu user time is at 40% without any particular program showing as using CPU in the top listing. 'Problem' was reproducible with 2.4.x and now with 2.6.8.1.
So it this a real problem or is there something that I don't understand in particular? Thanks for the insight.
Jerome
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 6 lines · Norbert van Nobelen
The load and the CPU useage are two separate things:
Load: Defined by a programmer on an estimate on which his program is running 100% fulltime, thus consuming little or more CPU/IO.
The interesting program you mention is the VoIP application. Is this program multithreaded and is every thread using a little bit of CPU? Than it quickly adds up to the mentioned 40%.
There are some threads in that app, not that many, and none show in the top listing (which displays at least 30 entries). So I don't think this sum scenario is valid.
Quoted 1 line
The load is than also easily reached.
Quoted 9 lines · jerome lacoste
Quoted 6 lines · Norbert van Nobelen
The load and the CPU useage are two separate things:
Load: Defined by a programmer on an estimate on which his program is running 100% fulltime, thus consuming little or more CPU/IO.
The interesting program you mention is the VoIP application. Is this program multithreaded and is every thread using a little bit of CPU? Than it quickly adds up to the mentioned 40%.
Quoted 3 lines
There are some threads in that app, not that many, and none show in the top listing (which displays at least 30 entries). So I don't think this sum scenario is valid.
The correct display of threaded processes in top should be fixed by the combination of procps-3.2.4 and the linux-2.6.10 kernel. This according to the text in the announcement of procps-3.2.4. I didn't test it yet, though.
Regards,
Toon.
Signature · 3 lines
"Debugging is twice as hard as writing the code in the first place. Therefore, if you write the code as cleverly as possible, you are, by definition, not smart enough to debug it." - Brian W. Kernighan