Skip to contentSkip to conversation

CONFIG_SCSI_QLA2<tripleX> looks dead - could it be removed ?

DISCUSSION Alessandro Suardi 2 participants 3 messages Jan 9, 2005

lore
Share & tools
lore
#0 lore raw

Hoping that this time the gmail filter doesn't bounce my subject (doh)

Said entry only appears in defconfigs, but doesn't seem to be actually used by anyone - at least according to this grep:

[asuardi@incident linux]$ find . -type f | xargs grep CONFIG_SCSI_QLA2XXX | grep -v defconfig
./drivers/scsi/Makefile:obj-$(CONFIG_SCSI_QLA2XXX) += qla2xxx/
./include/linux/autoconf.h:#define CONFIG_SCSI_QLA2XXX_MODULE 1 ./.config:CONFIG_SCSI_QLA2XXX=m ./.config.old:CONFIG_SCSI_QLA2XXX=m
[asuardi@incident linux]$

Moreover, there doesn't seem to be any entry in kbuild menus to
turn it off. Even taking it out of my .config and running oldconfig brings it back in.

--alessandro

"And every dream, every, is just a dream after all"

(Heather Nova, "Paper Cup")

#1 lore raw
Quoted 7 lines · Alessandro Suardi

Hoping that this time the gmail filter doesn't bounce my subject (doh)

Said entry only appears in defconfigs, but doesn't seem to be actually used by anyone - at least according to this grep:

[asuardi@incident linux]$ find . -type f | xargs grep CONFIG_SCSI_QLA2XXX | grep -v defconfig

Correct grep command:
grep -r SCSI_QLA2XXX * | grep -v defconfig

Quoted 9 lines

./drivers/scsi/Makefile:obj-$(CONFIG_SCSI_QLA2XXX) += qla2xxx/
./include/linux/autoconf.h:#define CONFIG_SCSI_QLA2XXX_MODULE 1 ./.config:CONFIG_SCSI_QLA2XXX=m ./.config.old:CONFIG_SCSI_QLA2XXX=m
[asuardi@incident linux]$

Moreover, there doesn't seem to be any entry in kbuild menus to
turn it off. Even taking it out of my .config and running oldconfig brings it back in.

You missed drivers/scsi/qla2xxx/Kconfig .

Quoted 1 line

--alessandro

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
#2 lore raw
Quoted 4 lines · Adrian Bunk
Quoted 2 lines · Alessandro Suardi

Hoping that this time the gmail filter doesn't bounce my subject (doh)

Quoted 8 lines
Quoted 5 lines

Said entry only appears in defconfigs, but doesn't seem to be actually used by anyone - at least according to this grep:

[asuardi@incident linux]$ find . -type f | xargs grep CONFIG_SCSI_QLA2XXX | grep -v defconfig

Correct grep command:
grep -r SCSI_QLA2XXX * | grep -v defconfig

Thanks - it shows I should go to bed after watching the NFL wildcards...

Quoted 11 lines
Quoted 9 lines

./drivers/scsi/Makefile:obj-$(CONFIG_SCSI_QLA2XXX) += qla2xxx/
./include/linux/autoconf.h:#define CONFIG_SCSI_QLA2XXX_MODULE 1 ./.config:CONFIG_SCSI_QLA2XXX=m ./.config.old:CONFIG_SCSI_QLA2XXX=m
[asuardi@incident linux]$

Moreover, there doesn't seem to be any entry in kbuild menus to
turn it off. Even taking it out of my .config and running oldconfig brings it back in.

You missed drivers/scsi/qla2xxx/Kconfig .

Ah, I see, thanks.

So, if I'm saying CONFIG_SCSI=m for USB storage I get an unwanted
CONFIG_SCSI_QLA2XXX=m without any way to turn it off.

Well, as long as it's harmless...

--alessandro

"And every dream, every, is just a dream after all"

(Heather Nova, "Paper Cup")