drm: rockchip: vop_crtc_mode_fixup is breaking clock configuration
I've recently installed U-boot to boot a Sapphire board with the HDMI display, before i was using Linux + kexec as bootloader. Since then, linux fails to re-initialize the HDMI display giving the following error message:
dwhdmi-rockchip ff940000.hdmi: PHY configuration failed (clock 148501000)
which comes from drivers/gpu/drm/bridge/synopsys/dw-hdmi.c:1522
The clock frequency 148500000 is 'rounded up' to 148501000 in vop_crtc_mode_fixup from which comes from drivers/gpu/drm/rockchip/rockchip_drm_vop.c:1184
So far i've found two workarounds: remove the vop_crtc_mode_fixup function or unplug and reconnect the HDMI cable. From my point of view, not having a display is a regression, although not in Linux itself, is in its environment.
U-boot is configuring the display at 2560x1440, which proves the HW is capable of running at such resolution. Linux instead is configuring it at 1920x1080, resolutions above that are not even supported. Please, can this situation be improved?
Any feedback is welcome and i am willing to help!
Regards,
Vicente.
_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip