question about filter priorities and "tc -d filter show" output
The interface is setup like this:
# tc qdisc del dev eth0 root # tc qdisc add dev eth0 root handle 1: htb default 2 # tc class add dev eth0 parent 1: classid 1:2 htb rate 20mbit ceil 20mbit
If I add a second class and a filter to send traffic to it like this:
# tc class add dev eth0 parent 1: classid 1:130 htb rate 1Mbit ceil 1Mbit # tc filter add dev eth0 protocol ip parent 1:0 prio 130 u32 match ip dst \
Quoted 1 line
1.1.1.10 flowid 1:130
The output of "tc -d filter show dev eth0" makes sense to me and looks like this:
filter parent 1: protocol ip pref 130 u32
filter parent 1: protocol ip pref 130 u32 fh 800: ht divisor 1 filter parent 1: protocol ip pref 130 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:130
match 0101010a/ffffffff at 16
If I add a third class and a filter for it, things start looking weird to me:
# tc filter add dev eth0 protocol ip parent 1:0 prio 131 u32 match ip dst 1.1.1.11 \
Quoted 1 line
flowid 1:131
# tc class add dev eth0 parent 1: classid 1:132 htb rate 1Mbit ceil 1Mbit # tc -d filter show dev eth0 filter parent 1: protocol ip pref 130 u32 filter parent 1: protocol ip pref 130 u32 fh 801: ht divisor 1 filter parent 1: protocol ip pref 130 u32 fh 801::800 order 2048 key ht 801 bkt 0 flowid 1:131 match 0101010b/ffffffff at 16 filter parent 1: protocol ip pref 130 u32 fh 800: ht divisor 1 filter parent 1: protocol ip pref 130 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:130 match 0101010a/ffffffff at 16 filter parent 1: protocol ip pref 131 u32 filter parent 1: protocol ip pref 131 u32 fh 801: ht divisor 1 filter parent 1: protocol ip pref 131 u32 fh 801::800 order 2048 key ht 801 bkt 0 flowid 1:131 match 0101010b/ffffffff at 16 filter parent 1: protocol ip pref 131 u32 fh 800: ht divisor 1 filter parent 1: protocol ip pref 131 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:130 match 0101010a/ffffffff at 16
If N is the number of filters I have on the root qdisc, I get N-squared entries from the "show filter" command.
Can someone explain how this works or point me to documentation that explains it? My system doesn't have a "tc-filters" manpage.
Thanks!
-Jacob
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
forgot the [LARTC] prefix in the subject...
Quoted 47 lines · jacob martinson
The interface is setup like this:
# tc qdisc del dev eth0 root # tc qdisc add dev eth0 root handle 1: htb default 2 # tc class add dev eth0 parent 1: classid 1:2 htb rate 20mbit ceil 20mbitIf I add a second class and a filter to send traffic to it like this:
# tc class add dev eth0 parent 1: classid 1:130 htb rate 1Mbit ceil 1Mbit # tc filter add dev eth0 protocol ip parent 1:0 prio 130 u32 match ip dst \Quoted 1 line
1.1.1.10 flowid 1:130
The output of "tc -d filter show dev eth0" makes sense to me and looks like this:
filter parent 1: protocol ip pref 130 u32
filter parent 1: protocol ip pref 130 u32 fh 800: ht divisor 1 filter parent 1: protocol ip pref 130 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:130
match 0101010a/ffffffff at 16If I add a third class and a filter for it, things start looking weird to me:
# tc filter add dev eth0 protocol ip parent 1:0 prio 131 u32 match ip dst 1.1.1.11 \Quoted 1 line
flowid 1:131
# tc class add dev eth0 parent 1: classid 1:132 htb rate 1Mbit ceil 1Mbit # tc -d filter show dev eth0 filter parent 1: protocol ip pref 130 u32 filter parent 1: protocol ip pref 130 u32 fh 801: ht divisor 1 filter parent 1: protocol ip pref 130 u32 fh 801::800 order 2048 key ht 801 bkt 0 flowid 1:131 match 0101010b/ffffffff at 16 filter parent 1: protocol ip pref 130 u32 fh 800: ht divisor 1 filter parent 1: protocol ip pref 130 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:130 match 0101010a/ffffffff at 16 filter parent 1: protocol ip pref 131 u32 filter parent 1: protocol ip pref 131 u32 fh 801: ht divisor 1 filter parent 1: protocol ip pref 131 u32 fh 801::800 order 2048 key ht 801 bkt 0 flowid 1:131 match 0101010b/ffffffff at 16 filter parent 1: protocol ip pref 131 u32 fh 800: ht divisor 1 filter parent 1: protocol ip pref 131 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:130 match 0101010a/ffffffff at 16If N is the number of filters I have on the root qdisc, I get N-squared entries from the "show filter" command.
Quoted 7 lines
Can someone explain how this works or point me to documentation that explains it? My system doesn't have a "tc-filters" manpage.
Thanks!
-Jacob
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/