2.6.14-rc5-rt5 - softirq-timer/0/3[CPU#0]: BUG in ktime_get at kernel/ktimers.c:103
Hi,
This is on an older machine. Athlon 1600+ / older Via chipset.
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 16 throttling states)
Time: tsc clocksource has been installed.
WARNING: non-monotonic time!
... time warped from 151976744 to 147973105. softirq-timer/0/3[CPU#0]: BUG in ktime_get at kernel/ktimers.c:103
[<c0118e20>] __WARN_ON+0x60/0xc0 (8) [<c013072d>] ktime_get+0xed/0x130 (40) [<c01312de>] ktimer_run_queues+0x2e/0x130 (64) [<c01217f9>] run_timer_softirq+0xc9/0x3e0 (60) [<c03845ff>] schedule+0x4f/0x120 (16) [<c011d837>] ksoftirqd+0xb7/0x110 (28) [<c011d780>] ksoftirqd+0x0/0x110 (36) [<c012d29a>] kthread+0xba/0xc0 (4) [<c012d1e0>] kthread+0x0/0xc0 (28) [<c01013d5>] kernel_thread_helper+0x5/0x10 (16) WARNING: non-monotonic time! ... time warped from 151976744 to 148971665. softirq-timer/0/3[CPU#0]: BUG in ktime_get at kernel/ktimers.c:103 [<c0118e20>] __WARN_ON+0x60/0xc0 (8) [<c013072d>] ktime_get+0xed/0x130 (40) [<c01312de>] ktimer_run_queues+0x2e/0x130 (64) [<c01217f9>] run_timer_softirq+0xc9/0x3e0 (60) [<c03845ff>] schedule+0x4f/0x120 (16) [<c011d837>] ksoftirqd+0xb7/0x110 (28) [<c011d780>] ksoftirqd+0x0/0x110 (36) [<c012d29a>] kthread+0xba/0xc0 (4) [<c012d1e0>] kthread+0x0/0xc0 (28) [<c01013d5>] kernel_thread_helper+0x5/0x10 (16) WARNING: non-monotonic time! ... time warped from 151976744 to 149972579. softirq-timer/0/3[CPU#0]: BUG in ktime_get at kernel/ktimers.c:103 [<c0118e20>] __WARN_ON+0x60/0xc0 (8) [<c013072d>] ktime_get+0xed/0x130 (40) [<c01312de>] ktimer_run_queues+0x2e/0x130 (64) [<c01217f9>] run_timer_softirq+0xc9/0x3e0 (60) [<c03845ff>] schedule+0x4f/0x120 (16) [<c011d837>] ksoftirqd+0xb7/0x110 (28) [<c011d780>] ksoftirqd+0x0/0x110 (36) [<c012d29a>] kthread+0xba/0xc0 (4) [<c012d1e0>] kthread+0x0/0xc0 (28) [<c01013d5>] kernel_thread_helper+0x5/0x10 (16)
lp: driver loaded but no devices found
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
Quoted 4 lines · Mark Knecht
Time: tsc clocksource has been installed.
WARNING: non-monotonic time!
... time warped from 151976744 to 147973105. softirq-timer/0/3[CPU#0]: BUG inktime_getatkernel/ktimers.c:103
Hi Mark,
Yeah, I saw this too, and it went through to Thomas Gleixner and then to John Stultz, where he said that he may have fixed this in his latest version. So we are now waiting on Thomas to pull John's work into the ktimers code, and then onto Ingo's RT base.
So, until then, you may just ignore the messages. It should only happen when the tsc clocksource changes.
Unless, of course -rt5 already has this (I just got back from Germany, so I've been out of the loop).
Thomas, this hasn't been done yet, has it?
-- Steve
Quoted 12 lines · Steven Rostedt
Quoted 4 lines
Time: tsc clocksource has been installed.
WARNING: non-monotonic time!
... time warped from 151976744 to 147973105. softirq-timer/0/3[CPU#0]: BUG inktime_getatkernel/ktimers.c:103Hi Mark,
Yeah, I saw this too, and it went through to Thomas Gleixner and then to John Stultz, where he said that he may have fixed this in his latest version. So we are now waiting on Thomas to pull John's work into the ktimers code, and then onto Ingo's RT base.
Quoted 7 lines
So, until then, you may just ignore the messages. It should only happen when the tsc clocksource changes.
Unless, of course -rt5 already has this (I just got back from Germany, so I've been out of the loop).
Thomas, this hasn't been done yet, has it?
not yet, but it's in progress. Meanwhile i increased the number of times the warning will be printed per bootup (from 1 to 3), so that if a time warp happens outside of that clock-switch case it should be printed too.
Ingo
Quoted 9 lines · Ingo Molnar
Quoted 2 lines · Steven Rostedt
Thomas, this hasn't been done yet, has it?
not yet, but it's in progress. Meanwhile i increased the number of times the warning will be printed per bootup (from 1 to 3), so that if a time warp happens outside of that clock-switch case it should be printed too.
Unfortunately, the problem doesn't go away until the clocks are eventually updated. So as Mark got, we see three outputs for every time this happens until the now catches up with the prev.
Perhaps we should also add another update of prev?
-- Steve
linux-2.6.14-rc5-rt5/kernel/ktimers.c +1 -0
@@ -102,6 +102,7 @@ ktime_to_ns(prev), ktime_to_ns(now));WARN_ON (1 ); } +per_cpu (prev_mono_time, cpu) = now;return prev; }per_cpu (prev_mono_time, cpu) = now;