next/master bisection: baseline.login on sun8i-h2-plus-orangepi-zero
Hi Stephen,
Please see the bisection report below about a boot failure.
Reports aren't automatically sent to the public while we're trialing new bisection features on kernelci.org but this one looks valid.
There's nothing in the serial console log, probably because it's crashing too early during boot. I'm not sure if other platforms on kernelci.org were hit by this in the same way, it's tricky to tell partly because there is no output. It should possible to run it again with earlyprintk enabled in BayLibre's test lab though.
Thanks,
Guillaume
Quoted 114 lines · kernelci.org bot
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This automated bisection report was sent to you on the basis * * that you may be involved with the breaking commit it has * * found. No manual investigation has been done to verify it, * * and the root cause of the problem may be somewhere else. * * * * If you do send a fix, please include this trailer: * * Reported-by: "kernelci.org bot" <[email protected]> * * * * Hope this helps! ** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
next/master bisection: baseline.login on sun8i-h2-plus-orangepi-zero
Summary:
Start: c25a951c50dc Add linux-next specific files for 20200217 Plain log: https://storage.kernelci.org//next/master/next-20200217/arm/multi_v7_defconfig/gcc-8/lab-baylibre/baseline-sun8i-h2-plus-orangepi-zero.txt HTML log: https://storage.kernelci.org//next/master/next-20200217/arm/multi_v7_defconfig/gcc-8/lab-baylibre/baseline-sun8i-h2-plus-orangepi-zero.html Result: 2760878662a2 clk: Bail out when calculating phase fails during clk registrationChecks:
revert: PASS
verify: PASSParameters:
Tree: next URL: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git Branch: master Target: sun8i-h2-plus-orangepi-zero CPU arch: arm Lab: lab-baylibre Compiler: gcc-8 Config: multi_v7_defconfig Test case: baseline.loginBreaking commit found:
-------------------------------------------------------------------------------
commit2760878662a290ac57cff8a5a8d8bda8f4dddc37Author: Stephen Boyd <[email protected]> Date: Wed Feb 5 15:28:02 2020 -0800clk: Bail out when calculating phase fails during clk registration
Bail out of clk registration if we fail to get the phase for a clk that has a
clk_ops::get_phase()callback. Print a warning too so that driver authors can easily figure out that some clk is unable to read back phase information at boot.Cc Douglas Anderson <[email protected]>Cc Heiko Stuebner <[email protected]>Suggested-by Jerome Brunet <[email protected]>Signed-off-by Stephen Boyd <[email protected]>Acked-by Jerome Brunet <[email protected]>drivers/clk/clk.c +6
-2@@ -3457,7 +3457,12 @@ static int __clk_core_init(struct clk_core *core)* Since a phase is by definition relative to its parent, just * query the current clock phase, or just assume it's in phase. */ -clk_core_get_phase (core); + ret =clk_core_get_phase (core); +if (ret <0 ) { +pr_warn ("%s: Failed to get phase for clk '%s'\n" , __func__, + core->name); + goto out; + }/* * Set clk's duty cycle. ------------------------------------------------------------------------------- Git bisection log:
-------------------------------------------------------------------------------
git bisect start
# good: [11a48a5a18c63fd7621bb050228cebf13566e4d8] Linux 5.6-rc2
git bisect good11a48a5a18c63fd7621bb050228cebf13566e4d8
# bad: [c25a951c50dca1da4a449a985a9debd82dc18573] Add linux-next specific files for 20200217
git bisect badc25a951c50dca1da4a449a985a9debd82dc18573
# bad: [5859c179b7ed01050641bd565959a2c4571923da] Merge remote-tracking branch 'swiotlb/linux-next' git bisect bad5859c179b7ed01050641bd565959a2c4571923da
# bad: [ecf5a6e1ec22ecbe1c9086f40130188f31e37a38] Merge remote-tracking branch 'xtensa/xtensa-for-next' git bisect badecf5a6e1ec22ecbe1c9086f40130188f31e37a38
# good: [e475ff54b7d62c550768ce36617e8c8fec72cfc0] Merge remote-tracking branch 'reset/reset/next' git bisect goode475ff54b7d62c550768ce36617e8c8fec72cfc0
# bad: [9e86f8cc2d2f464e27c172127e02641fe77eccea] Merge remote-tracking branch 'sh/sh-next'
git bisect bad9e86f8cc2d2f464e27c172127e02641fe77eccea
# good: [1752d66d86600e9cb508612ded6984774b72321d] Merge remote-tracking branch 'tegra/for-next' git bisect good1752d66d86600e9cb508612ded6984774b72321d
# bad: [0ecb83df935b058a2c3727716a7fab539dbaba88] Merge remote-tracking branch 'csky/linux-next' git bisect bad0ecb83df935b058a2c3727716a7fab539dbaba88
# bad: [898fe3af935a45236cbfd053e79ae01506ae7aa2] Merge branch 'clk-formatting' into clk-next
git bisect bad898fe3af935a45236cbfd053e79ae01506ae7aa2
# bad: [0d426990beac93127a4ee37cc056fce928466f7d] Merge branch 'clk-phase-errors' into clk-next git bisect bad0d426990beac93127a4ee37cc056fce928466f7d
# good: [6e37add6b938941f755928159ede3c9855307066] Merge branch 'clk-qcom' into clk-next
git bisect good6e37add6b938941f755928159ede3c9855307066
# good: [5d98429bbebc5dc683ea6919d9b9e6e83e8c8867] Merge branch 'clk-fixes' into clk-next
git bisect good5d98429bbebc5dc683ea6919d9b9e6e83e8c8867
# good: [768a5d4f63c29d3bed5abb3c187312fcf623fa05] clk: Use 'parent' to shorten lines in__clk_core_init()git bisect good768a5d4f63c29d3bed5abb3c187312fcf623fa05
# bad: [2760878662a290ac57cff8a5a8d8bda8f4dddc37] clk: Bail out when calculating phase fails during clk registration git bisect bad2760878662a290ac57cff8a5a8d8bda8f4dddc37
# good: [0daa376d832f4ce585f153efee4233b52fa3fe58] clk: Move rate and accuracy recalc to mostly consumer APIs git bisect good0daa376d832f4ce585f153efee4233b52fa3fe58# first bad commit: [2760878662a290ac57cff8a5a8d8bda8f4dddc37] clk: Bail out when calculating phase fails during clk registration -------------------------------------------------------------------------------
Stephen Boyd
maintainerAdding some Allwinner folks. Presumably there is some sort of clk that is failing to calculate a phase when it gets registered. Maybe that's because the parent isn't registered yet?
Quoting Guillaume Tucker (2020-02-17 23:45:41)
Quoted 135 lines
Hi Stephen,
Please see the bisection report below about a boot failure.
Reports aren't automatically sent to the public while we're trialing new bisection features on kernelci.org but this one looks valid.
There's nothing in the serial console log, probably because it's crashing too early during boot. I'm not sure if other platforms on kernelci.org were hit by this in the same way, it's tricky to tell partly because there is no output. It should possible to run it again with earlyprintk enabled in BayLibre's test lab though.
Thanks,
GuillaumeQuoted 114 lines · kernelci.org bot
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This automated bisection report was sent to you on the basis * * that you may be involved with the breaking commit it has * * found. No manual investigation has been done to verify it, * * and the root cause of the problem may be somewhere else. * * * * If you do send a fix, please include this trailer: * * Reported-by: "kernelci.org bot" <[email protected]> * * * * Hope this helps! ** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
next/master bisection: baseline.login on sun8i-h2-plus-orangepi-zero
Summary:
Start: c25a951c50dc Add linux-next specific files for 20200217 Plain log: https://storage.kernelci.org//next/master/next-20200217/arm/multi_v7_defconfig/gcc-8/lab-baylibre/baseline-sun8i-h2-plus-orangepi-zero.txt HTML log: https://storage.kernelci.org//next/master/next-20200217/arm/multi_v7_defconfig/gcc-8/lab-baylibre/baseline-sun8i-h2-plus-orangepi-zero.html Result: 2760878662a2 clk: Bail out when calculating phase fails during clk registrationChecks:
revert: PASS
verify: PASSParameters:
Tree: next URL: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git Branch: master Target: sun8i-h2-plus-orangepi-zero CPU arch: arm Lab: lab-baylibre Compiler: gcc-8 Config: multi_v7_defconfig Test case: baseline.loginBreaking commit found:
-------------------------------------------------------------------------------
commit2760878662a290ac57cff8a5a8d8bda8f4dddc37Author: Stephen Boyd <[email protected]> Date: Wed Feb 5 15:28:02 2020 -0800clk: Bail out when calculating phase fails during clk registration
Bail out of clk registration if we fail to get the phase for a clk that has a
clk_ops::get_phase()callback. Print a warning too so that driver authors can easily figure out that some clk is unable to read back phase information at boot.Cc Douglas Anderson <[email protected]>Cc Heiko Stuebner <[email protected]>Suggested-by Jerome Brunet <[email protected]>Signed-off-by Stephen Boyd <[email protected]>Acked-by Jerome Brunet <[email protected]>drivers/clk/clk.c +6
-2@@ -3457,7 +3457,12 @@ static int __clk_core_init(struct clk_core *core)* Since a phase is by definition relative to its parent, just * query the current clock phase, or just assume it's in phase. */ -clk_core_get_phase (core); + ret =clk_core_get_phase (core); +if (ret <0 ) { +pr_warn ("%s: Failed to get phase for clk '%s'\n" , __func__, + core->name); + goto out; + }/* * Set clk's duty cycle. ------------------------------------------------------------------------------- Git bisection log:
-------------------------------------------------------------------------------
git bisect start
# good: [11a48a5a18c63fd7621bb050228cebf13566e4d8] Linux 5.6-rc2
git bisect good11a48a5a18c63fd7621bb050228cebf13566e4d8
# bad: [c25a951c50dca1da4a449a985a9debd82dc18573] Add linux-next specific files for 20200217
git bisect badc25a951c50dca1da4a449a985a9debd82dc18573
# bad: [5859c179b7ed01050641bd565959a2c4571923da] Merge remote-tracking branch 'swiotlb/linux-next' git bisect bad5859c179b7ed01050641bd565959a2c4571923da
# bad: [ecf5a6e1ec22ecbe1c9086f40130188f31e37a38] Merge remote-tracking branch 'xtensa/xtensa-for-next' git bisect badecf5a6e1ec22ecbe1c9086f40130188f31e37a38
# good: [e475ff54b7d62c550768ce36617e8c8fec72cfc0] Merge remote-tracking branch 'reset/reset/next' git bisect goode475ff54b7d62c550768ce36617e8c8fec72cfc0
# bad: [9e86f8cc2d2f464e27c172127e02641fe77eccea] Merge remote-tracking branch 'sh/sh-next'
git bisect bad9e86f8cc2d2f464e27c172127e02641fe77eccea
# good: [1752d66d86600e9cb508612ded6984774b72321d] Merge remote-tracking branch 'tegra/for-next' git bisect good1752d66d86600e9cb508612ded6984774b72321d
# bad: [0ecb83df935b058a2c3727716a7fab539dbaba88] Merge remote-tracking branch 'csky/linux-next' git bisect bad0ecb83df935b058a2c3727716a7fab539dbaba88
# bad: [898fe3af935a45236cbfd053e79ae01506ae7aa2] Merge branch 'clk-formatting' into clk-next
git bisect bad898fe3af935a45236cbfd053e79ae01506ae7aa2
# bad: [0d426990beac93127a4ee37cc056fce928466f7d] Merge branch 'clk-phase-errors' into clk-next git bisect bad0d426990beac93127a4ee37cc056fce928466f7d
# good: [6e37add6b938941f755928159ede3c9855307066] Merge branch 'clk-qcom' into clk-next
git bisect good6e37add6b938941f755928159ede3c9855307066
# good: [5d98429bbebc5dc683ea6919d9b9e6e83e8c8867] Merge branch 'clk-fixes' into clk-next
git bisect good5d98429bbebc5dc683ea6919d9b9e6e83e8c8867
# good: [768a5d4f63c29d3bed5abb3c187312fcf623fa05] clk: Use 'parent' to shorten lines in__clk_core_init()git bisect good768a5d4f63c29d3bed5abb3c187312fcf623fa05
# bad: [2760878662a290ac57cff8a5a8d8bda8f4dddc37] clk: Bail out when calculating phase fails during clk registration git bisect bad2760878662a290ac57cff8a5a8d8bda8f4dddc37
# good: [0daa376d832f4ce585f153efee4233b52fa3fe58] clk: Move rate and accuracy recalc to mostly consumer APIs git bisect good0daa376d832f4ce585f153efee4233b52fa3fe58# first bad commit: [2760878662a290ac57cff8a5a8d8bda8f4dddc37] clk: Bail out when calculating phase fails during clk registration -------------------------------------------------------------------------------
Quoted 3 lines · Stephen Boyd
Adding some Allwinner folks. Presumably there is some sort of clk that is failing to calculate a phase when it gets registered. Maybe that's because the parent isn't registered yet?
FYI this is still happening on several Allwinner boards:
Quoted 13 lines · kernelci.org bot
next/master bisection: baseline.login on sun7i-a20-cubieboard2
Summary:
Start: c99b17ac03994 Add linux-next specific files for 20200225 Plain log: https://storage.kernelci.org//next/master/next-20200225/arm/multi_v7_defconfig/gcc-8/lab-baylibre/baseline-sun7i-a20-cubieboard2.txt HTML log: https://storage.kernelci.org//next/master/next-20200225/arm/multi_v7_defconfig/gcc-8/lab-baylibre/baseline-sun7i-a20-cubieboard2.html Result: 2760878662a29 clk: Bail out when calculating phase fails during clk registrationChecks:
revert: PASS
verify: PASSParameters:
Quoted 9 lines
Tree: next URL: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git Branch: master Target: sun7i-a20-cubieboard2 CPU arch: arm Lab: lab-baylibre Compiler: gcc-8 Config: multi_v7_defconfig Test case: baseline.login
Guillaume
Quoted 136 lines
Quoting Guillaume Tucker (2020-02-17 23:45:41)
Quoted 135 lines
Hi Stephen,
Please see the bisection report below about a boot failure.
Reports aren't automatically sent to the public while we're trialing new bisection features on kernelci.org but this one looks valid.
There's nothing in the serial console log, probably because it's crashing too early during boot. I'm not sure if other platforms on kernelci.org were hit by this in the same way, it's tricky to tell partly because there is no output. It should possible to run it again with earlyprintk enabled in BayLibre's test lab though.
Thanks,
GuillaumeQuoted 114 lines · kernelci.org bot
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This automated bisection report was sent to you on the basis * * that you may be involved with the breaking commit it has * * found. No manual investigation has been done to verify it, * * and the root cause of the problem may be somewhere else. * * * * If you do send a fix, please include this trailer: * * Reported-by: "kernelci.org bot" <[email protected]> * * * * Hope this helps! ** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
next/master bisection: baseline.login on sun8i-h2-plus-orangepi-zero
Summary:
Start: c25a951c50dc Add linux-next specific files for 20200217 Plain log: https://storage.kernelci.org//next/master/next-20200217/arm/multi_v7_defconfig/gcc-8/lab-baylibre/baseline-sun8i-h2-plus-orangepi-zero.txt HTML log: https://storage.kernelci.org//next/master/next-20200217/arm/multi_v7_defconfig/gcc-8/lab-baylibre/baseline-sun8i-h2-plus-orangepi-zero.html Result: 2760878662a2 clk: Bail out when calculating phase fails during clk registrationChecks:
revert: PASS
verify: PASSParameters:
Tree: next URL: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git Branch: master Target: sun8i-h2-plus-orangepi-zero CPU arch: arm Lab: lab-baylibre Compiler: gcc-8 Config: multi_v7_defconfig Test case: baseline.loginBreaking commit found:
-------------------------------------------------------------------------------
commit2760878662a290ac57cff8a5a8d8bda8f4dddc37Author: Stephen Boyd <[email protected]> Date: Wed Feb 5 15:28:02 2020 -0800clk: Bail out when calculating phase fails during clk registration
Bail out of clk registration if we fail to get the phase for a clk that has a
clk_ops::get_phase()callback. Print a warning too so that driver authors can easily figure out that some clk is unable to read back phase information at boot.Cc Douglas Anderson <[email protected]>Cc Heiko Stuebner <[email protected]>Suggested-by Jerome Brunet <[email protected]>Signed-off-by Stephen Boyd <[email protected]>Acked-by Jerome Brunet <[email protected]>drivers/clk/clk.c +6
-2@@ -3457,7 +3457,12 @@ static int __clk_core_init(struct clk_core *core)* Since a phase is by definition relative to its parent, just * query the current clock phase, or just assume it's in phase. */ -clk_core_get_phase (core); + ret =clk_core_get_phase (core); +if (ret <0 ) { +pr_warn ("%s: Failed to get phase for clk '%s'\n" , __func__, + core->name); + goto out; + }/* * Set clk's duty cycle. ------------------------------------------------------------------------------- Git bisection log:
-------------------------------------------------------------------------------
git bisect start
# good: [11a48a5a18c63fd7621bb050228cebf13566e4d8] Linux 5.6-rc2
git bisect good11a48a5a18c63fd7621bb050228cebf13566e4d8
# bad: [c25a951c50dca1da4a449a985a9debd82dc18573] Add linux-next specific files for 20200217
git bisect badc25a951c50dca1da4a449a985a9debd82dc18573
# bad: [5859c179b7ed01050641bd565959a2c4571923da] Merge remote-tracking branch 'swiotlb/linux-next' git bisect bad5859c179b7ed01050641bd565959a2c4571923da
# bad: [ecf5a6e1ec22ecbe1c9086f40130188f31e37a38] Merge remote-tracking branch 'xtensa/xtensa-for-next' git bisect badecf5a6e1ec22ecbe1c9086f40130188f31e37a38
# good: [e475ff54b7d62c550768ce36617e8c8fec72cfc0] Merge remote-tracking branch 'reset/reset/next' git bisect goode475ff54b7d62c550768ce36617e8c8fec72cfc0
# bad: [9e86f8cc2d2f464e27c172127e02641fe77eccea] Merge remote-tracking branch 'sh/sh-next'
git bisect bad9e86f8cc2d2f464e27c172127e02641fe77eccea
# good: [1752d66d86600e9cb508612ded6984774b72321d] Merge remote-tracking branch 'tegra/for-next' git bisect good1752d66d86600e9cb508612ded6984774b72321d
# bad: [0ecb83df935b058a2c3727716a7fab539dbaba88] Merge remote-tracking branch 'csky/linux-next' git bisect bad0ecb83df935b058a2c3727716a7fab539dbaba88
# bad: [898fe3af935a45236cbfd053e79ae01506ae7aa2] Merge branch 'clk-formatting' into clk-next
git bisect bad898fe3af935a45236cbfd053e79ae01506ae7aa2
# bad: [0d426990beac93127a4ee37cc056fce928466f7d] Merge branch 'clk-phase-errors' into clk-next git bisect bad0d426990beac93127a4ee37cc056fce928466f7d
# good: [6e37add6b938941f755928159ede3c9855307066] Merge branch 'clk-qcom' into clk-next
git bisect good6e37add6b938941f755928159ede3c9855307066
# good: [5d98429bbebc5dc683ea6919d9b9e6e83e8c8867] Merge branch 'clk-fixes' into clk-next
git bisect good5d98429bbebc5dc683ea6919d9b9e6e83e8c8867
# good: [768a5d4f63c29d3bed5abb3c187312fcf623fa05] clk: Use 'parent' to shorten lines in__clk_core_init()git bisect good768a5d4f63c29d3bed5abb3c187312fcf623fa05
# bad: [2760878662a290ac57cff8a5a8d8bda8f4dddc37] clk: Bail out when calculating phase fails during clk registration git bisect bad2760878662a290ac57cff8a5a8d8bda8f4dddc37
# good: [0daa376d832f4ce585f153efee4233b52fa3fe58] clk: Move rate and accuracy recalc to mostly consumer APIs git bisect good0daa376d832f4ce585f153efee4233b52fa3fe58# first bad commit: [2760878662a290ac57cff8a5a8d8bda8f4dddc37] clk: Bail out when calculating phase fails during clk registration -------------------------------------------------------------------------------
Quoted 3 lines · Stephen Boyd
Adding some Allwinner folks. Presumably there is some sort of clk that is failing to calculate a phase when it gets registered. Maybe that's because the parent isn't registered yet?
It's simpler than that :)
Quoted 77 lines
Quoting Guillaume Tucker (2020-02-17 23:45:41)
Quoted 76 lines
Hi Stephen,
Please see the bisection report below about a boot failure.
Reports aren't automatically sent to the public while we're trialing new bisection features on kernelci.org but this one looks valid.
There's nothing in the serial console log, probably because it's crashing too early during boot. I'm not sure if other platforms on kernelci.org were hit by this in the same way, it's tricky to tell partly because there is no output. It should possible to run it again with earlyprintk enabled in BayLibre's test lab though.
Thanks,
GuillaumeQuoted 56 lines · kernelci.org bot
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This automated bisection report was sent to you on the basis * * that you may be involved with the breaking commit it has * * found. No manual investigation has been done to verify it, * * and the root cause of the problem may be somewhere else. * * * * If you do send a fix, please include this trailer: * * Reported-by: "kernelci.org bot" <[email protected]> * * * * Hope this helps! ** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
next/master bisection: baseline.login on sun8i-h2-plus-orangepi-zero
Summary:
Start: c25a951c50dc Add linux-next specific files for 20200217 Plain log: https://storage.kernelci.org//next/master/next-20200217/arm/multi_v7_defconfig/gcc-8/lab-baylibre/baseline-sun8i-h2-plus-orangepi-zero.txt HTML log: https://storage.kernelci.org//next/master/next-20200217/arm/multi_v7_defconfig/gcc-8/lab-baylibre/baseline-sun8i-h2-plus-orangepi-zero.html Result: 2760878662a2 clk: Bail out when calculating phase fails during clk registrationChecks:
revert: PASS
verify: PASSParameters:
Tree: next URL: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git Branch: master Target: sun8i-h2-plus-orangepi-zero CPU arch: arm Lab: lab-baylibre Compiler: gcc-8 Config: multi_v7_defconfig Test case: baseline.loginBreaking commit found:
-------------------------------------------------------------------------------
commit2760878662a290ac57cff8a5a8d8bda8f4dddc37Author: Stephen Boyd <[email protected]> Date: Wed Feb 5 15:28:02 2020 -0800clk: Bail out when calculating phase fails during clk registration
Bail out of clk registration if we fail to get the phase for a clk that has a
clk_ops::get_phase()callback. Print a warning too so that driver authors can easily figure out that some clk is unable to read back phase information at boot.Cc Douglas Anderson <[email protected]>Cc Heiko Stuebner <[email protected]>Suggested-by Jerome Brunet <[email protected]>Signed-off-by Stephen Boyd <[email protected]>Acked-by Jerome Brunet <[email protected]>
Quoted 15 lines
Quoted 7 lines
Quoted 7 lines
drivers/clk/clk.c +0
-0@@ -3457,7 +3457,12 @@ static int __clk_core_init(struct clk_core *core)* Since a phase is by definition relative to its parent, just * query the current clock phase, or just assume it's in phase. Quoted 8 lines
drivers/clk/clk.c static int __clk_core_init(struct clk_core *core) · line 3465
Quoted 8 lines
drivers/clk/clk.c +6
-1*/ -clk_core_get_phase (core); + ret =clk_core_get_phase (core); +if (ret <0 ) { +pr_warn ("%s: Failed to get phase for clk '%s'\n" , __func__, + core->name); + goto out; + }
The thing is, clk_core_get_phase actually returns the phase on success :)
So, when you actually have a phase returned, and not an error, you end up with a positive, non-zero, value for ret.
And since it's the latest assignment of that value, and that we return ret all the time, even on success, we end up returning that positive, non-zero value to __clk_register, which in turn tests whether it's non-zero for success (it's not), and then proceeds to garbage collect everything.
I guess we're just the odd ones actually returning non-zero phases at init time and in kernelci.
I'll send a patch
Maxime
Hi all,
Missatge de Maxime Ripard <[email protected]> del dia dt., 25 de febr. 2020 a les 15:34:
Quoted 106 lines · Stephen Boyd
Quoted 3 lines
Adding some Allwinner folks. Presumably there is some sort of clk that is failing to calculate a phase when it gets registered. Maybe that's because the parent isn't registered yet?
It's simpler than that :)
Quoted 77 lines
Quoting Guillaume Tucker (2020-02-17 23:45:41)
Quoted 76 lines
Hi Stephen,
Please see the bisection report below about a boot failure.
Reports aren't automatically sent to the public while we're trialing new bisection features on kernelci.org but this one looks valid.
There's nothing in the serial console log, probably because it's crashing too early during boot. I'm not sure if other platforms on kernelci.org were hit by this in the same way, it's tricky to tell partly because there is no output. It should possible to run it again with earlyprintk enabled in BayLibre's test lab though.
Thanks,
GuillaumeQuoted 56 lines · kernelci.org bot
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This automated bisection report was sent to you on the basis * * that you may be involved with the breaking commit it has * * found. No manual investigation has been done to verify it, * * and the root cause of the problem may be somewhere else. * * * * If you do send a fix, please include this trailer: * * Reported-by: "kernelci.org bot" <[email protected]> * * * * Hope this helps! ** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
next/master bisection: baseline.login on sun8i-h2-plus-orangepi-zero
Summary:
Start: c25a951c50dc Add linux-next specific files for 20200217 Plain log: https://storage.kernelci.org//next/master/next-20200217/arm/multi_v7_defconfig/gcc-8/lab-baylibre/baseline-sun8i-h2-plus-orangepi-zero.txt HTML log: https://storage.kernelci.org//next/master/next-20200217/arm/multi_v7_defconfig/gcc-8/lab-baylibre/baseline-sun8i-h2-plus-orangepi-zero.html Result: 2760878662a2 clk: Bail out when calculating phase fails during clk registrationChecks:
revert: PASS
verify: PASSParameters:
Tree: next URL: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git Branch: master Target: sun8i-h2-plus-orangepi-zero CPU arch: arm Lab: lab-baylibre Compiler: gcc-8 Config: multi_v7_defconfig Test case: baseline.loginBreaking commit found:
-------------------------------------------------------------------------------
commit2760878662a290ac57cff8a5a8d8bda8f4dddc37Author: Stephen Boyd <[email protected]> Date: Wed Feb 5 15:28:02 2020 -0800clk: Bail out when calculating phase fails during clk registration
Bail out of clk registration if we fail to get the phase for a clk that has a
clk_ops::get_phase()callback. Print a warning too so that driver authors can easily figure out that some clk is unable to read back phase information at boot.Cc Douglas Anderson <[email protected]>Cc Heiko Stuebner <[email protected]>Suggested-by Jerome Brunet <[email protected]>Signed-off-by Stephen Boyd <[email protected]>Acked-by Jerome Brunet <[email protected]>Quoted 15 lines
Quoted 7 lines
Quoted 7 lines
drivers/clk/clk.c +0
-0@@ -3457,7 +3457,12 @@ static int __clk_core_init(struct clk_core *core)* Since a phase is by definition relative to its parent, just * query the current clock phase, or just assume it's in phase. Quoted 8 lines
drivers/clk/clk.c static int __clk_core_init(struct clk_core *core) · line 3465
Quoted 8 lines
drivers/clk/clk.c +6
-1*/ -clk_core_get_phase (core); + ret =clk_core_get_phase (core); +if (ret <0 ) { +pr_warn ("%s: Failed to get phase for clk '%s'\n" , __func__, + core->name); + goto out; + }The thing is,
clk_core_get_phaseactually returns the phase on success :)So, when you actually have a phase returned, and not an error, you end up with a positive, non-zero, value for ret.
Quoted 9 lines
And since it's the latest assignment of that value, and that we return ret all the time, even on success, we end up returning that positive, non-zero value to
__clk_register, which in turn tests whether it's non-zero for success (it's not), and then proceeds to garbage collect everything.I guess we're just the odd ones actually returning non-zero phases at init time and in kernelci.
Just to note that not only Allwiner is affected, Rockchip is also affected by this issue. Reverting the patch fixes the issue for me, but the patch proposed by Maxime [1] does _NOT_ fixes the issue for Rockchip, there is something else, I'll take a look. I can't answer that patch because didn't reach my inbox.
Regards,
Enric
[1] https://patchwork.kernel.org/patch/11403837/
Quoted 3 lines
I'll send a patch
Maxime
Hi all,
Missatge de Enric Balletbo Serra <[email protected]> del dia dc., 26 de febr. 2020 a les 18:15:
Quoted 127 lines
Hi all,
Missatge de Maxime Ripard <[email protected]> del dia dt., 25 de febr. 2020 a les 15:34:
Quoted 106 lines · Stephen Boyd
Quoted 3 lines
Adding some Allwinner folks. Presumably there is some sort of clk that is failing to calculate a phase when it gets registered. Maybe that's because the parent isn't registered yet?
It's simpler than that :)
Quoted 77 lines
Quoting Guillaume Tucker (2020-02-17 23:45:41)
Quoted 76 lines
Hi Stephen,
Please see the bisection report below about a boot failure.
Reports aren't automatically sent to the public while we're trialing new bisection features on kernelci.org but this one looks valid.
There's nothing in the serial console log, probably because it's crashing too early during boot. I'm not sure if other platforms on kernelci.org were hit by this in the same way, it's tricky to tell partly because there is no output. It should possible to run it again with earlyprintk enabled in BayLibre's test lab though.
Thanks,
GuillaumeQuoted 56 lines · kernelci.org bot
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This automated bisection report was sent to you on the basis * * that you may be involved with the breaking commit it has * * found. No manual investigation has been done to verify it, * * and the root cause of the problem may be somewhere else. * * * * If you do send a fix, please include this trailer: * * Reported-by: "kernelci.org bot" <[email protected]> * * * * Hope this helps! ** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
next/master bisection: baseline.login on sun8i-h2-plus-orangepi-zero
Summary:
Start: c25a951c50dc Add linux-next specific files for 20200217 Plain log: https://storage.kernelci.org//next/master/next-20200217/arm/multi_v7_defconfig/gcc-8/lab-baylibre/baseline-sun8i-h2-plus-orangepi-zero.txt HTML log: https://storage.kernelci.org//next/master/next-20200217/arm/multi_v7_defconfig/gcc-8/lab-baylibre/baseline-sun8i-h2-plus-orangepi-zero.html Result: 2760878662a2 clk: Bail out when calculating phase fails during clk registrationChecks:
revert: PASS
verify: PASSParameters:
Tree: next URL: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git Branch: master Target: sun8i-h2-plus-orangepi-zero CPU arch: arm Lab: lab-baylibre Compiler: gcc-8 Config: multi_v7_defconfig Test case: baseline.loginBreaking commit found:
-------------------------------------------------------------------------------
commit2760878662a290ac57cff8a5a8d8bda8f4dddc37Author: Stephen Boyd <[email protected]> Date: Wed Feb 5 15:28:02 2020 -0800clk: Bail out when calculating phase fails during clk registration
Bail out of clk registration if we fail to get the phase for a clk that has a
clk_ops::get_phase()callback. Print a warning too so that driver authors can easily figure out that some clk is unable to read back phase information at boot.Cc Douglas Anderson <[email protected]>Cc Heiko Stuebner <[email protected]>Suggested-by Jerome Brunet <[email protected]>Signed-off-by Stephen Boyd <[email protected]>Acked-by Jerome Brunet <[email protected]>Quoted 15 lines
Quoted 7 lines
Quoted 7 lines
drivers/clk/clk.c +0
-0@@ -3457,7 +3457,12 @@ static int __clk_core_init(struct clk_core *core)* Since a phase is by definition relative to its parent, just * query the current clock phase, or just assume it's in phase. Quoted 8 lines
drivers/clk/clk.c static int __clk_core_init(struct clk_core *core) · line 3465
Quoted 8 lines
drivers/clk/clk.c +6
-1*/ -clk_core_get_phase (core); + ret =clk_core_get_phase (core); +if (ret <0 ) { +pr_warn ("%s: Failed to get phase for clk '%s'\n" , __func__, + core->name); + goto out; + }The thing is,
clk_core_get_phaseactually returns the phase on success :)So, when you actually have a phase returned, and not an error, you end up with a positive, non-zero, value for ret.
Quoted 9 lines
And since it's the latest assignment of that value, and that we return ret all the time, even on success, we end up returning that positive, non-zero value to
__clk_register, which in turn tests whether it's non-zero for success (it's not), and then proceeds to garbage collect everything.I guess we're just the odd ones actually returning non-zero phases at init time and in kernelci.
Just to note that not only Allwiner is affected, Rockchip is also affected by this issue. Reverting the patch fixes the issue for me, but the patch proposed by Maxime [1] does _NOT_ fixes the issue for Rockchip, there is something else, I'll take a look. I can't answer that patch because didn't reach my inbox.
Quoted 5 lines
Regards,
Enric
For the record, the patch that fixes the issue on Rockchip is this:
* https://lkml.org/lkml/2020/3/3/1353
Thanks,
Enric
Quoted 4 lines
Quoted 4 lines
I'll send a patch
Maxime