Change initscript level
I am just trying to change modutils.sh to run from /etc/rcS.d/S05modutils.sh to /etc/rcS.d/S15modutils.sh
I can't figure this out. I have modified the yocto/source/arm/layers/core/meta/recipes-kernel/modutils-initscripts.bb
From: INITSCRIPT_PARAMS = "start 05 S ."
To: INITSCRIPT_PARAMS = "start 10 S ."
And I still only have S05modutils.sh
The pkg_postinst_modutils-initscripts still has "start 05 S ." in build/tmp/work/cortexa9hf-neon-xilinx-linux-gnueabi/modutils-initscripts/1.0-r7/pkgdata/runtime/modutils-initscripts
It's quite apparent that I don't know what I'm doing here and I could use some sage advice on how to move these startup levels around.
Thank you.
Mark Bishop
Sr. Firmware/Software Engineer - Microwave Subsystems
[cid:[email protected]]
4726 Eisenhower Blvd.
Tampa, FL 33634
USA
T +1 813 901 7293
[email protected]<mailto:[email protected]>
smithsinterconnect.com<http://www.smithsinterconnect.com/>
TRAK MICROWAVE IS NOW SMITHS INTERCONNECT!
Quoted 14 lines · Mark (STRT)
I am just trying to change
modutils.shto run from/etc/rcS.d/S05modutils.shto/etc/rcS.d/S15modutils.shI can’t figure this out. I have modified the yocto/source/arm/layers/core/meta/recipes-kernel/modutils-initscripts.bb
From:
INITSCRIPT_PARAMS= "start 05 S ."To:
INITSCRIPT_PARAMS= "start 10 S ."
Quoted 7 lines
And I still only have
S05modutils.shThe pkg_postinst_modutils-initscripts still has “start 05 S .” in build/tmp/work/cortexa9hf-neon-xilinx-linux-gnueabi/modutils-initscripts/1.0-r7/pkgdata/runtime/modutils-initscripts
I tried this and I can see the correct values. Which version of poky/OE-core are you using? Can you try to bitbake -c cleansstate and build modutils-initscripts again?
Quoted 60 lines
It’s quite apparent that I don’t know what I’m doing here and I could use some sage advice on how to move these startup levels around.
Thank you.
*Mark Bishop*
*Sr. Firmware/Software Engineer – Microwave Subsystems***
* *
cid:[email protected]**
4726 Eisenhower Blvd.
Tampa, FL 33634
USA
T +1 813 901 7293
*[email protected]
<mailto:[email protected]>**smithsinterconnect.com* <http://www.smithsinterconnect.com/>
*TRAK MICROWAVE IS NOW SMITHS INTERCONNECT!***
This e-mail contains proprietary information some or all of which may be legally privileged. It is intended for the recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the authority by replying to this e-mail. If you are not the intended recipient you must not use, disclose, distribute, copy, print, or rely on this e-mail. In addition, information contained in or attached to this e-mail may be subject to either 22 C.F.R. Parts 120?130, or 15 C.F.R. Parts 730-774. These regulations prohibit the release or disclosure of certain information contained herein to anyone who is not a
U.S. citizen or permanent resident alien, without a license first having been issued. Failure to observe such requirements is a violation ofU.S. law that carries serious penalties.