Skip to contentSkip to conversation

2.6.15-rc5 - nonfatal libata assertion (qc->n_elem > 0)

DISCUSSION ldonesty 1 participant 1 message Dec 10, 2005 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

ldonesty

author
#1 lore raw

Il Sat, 10 Dec 2005 21:30:09 +0100, Alessandro Suardi ha scritto:

Quoted 5 lines

This one is just for the record, as it doesn't appear to have had
any side effects...

Dell Latitude D610, uptodate FC4, kernel 2.6.15-rc5, booted with
libata.atapi_enabled=1.

Quoted 9 lines
Dec 10 19:33:26 sandman kernel: cdrom: This disc doesn't have any tracks
I recognize!
Dec 10 19:35:21 sandman kernel: Assertion failed! qc->n_elem >

0,drivers/scsi/libata-core.c,ata_fill_sg,line=2482 Dec 10 19:35:35 sandman last message repeated 18 times

This happened presumably when I earlier burned a CD-R
with .wav audio tracks; the burning was successful.

Here I've a new Dell Inspiron 6000 with Debian Sid and I see similar messages in dmesg (2.6.14) when I start k3b.
I've to say that libata.atapi_enabled=1 trick doesn't work for me (neither modprobe.conf option) and I need to change that value directly in libata-core.c.
Few days ago, I've tried a newer 2.6.15-rc4 with Jeff libata1 patch, and I see tons of these in the log:

Dec  1 13:14:56 Chiba kernel: ata2: no sense translation for error 0x20 Dec  1 13:14:56 Chiba kernel: ata2: no sense translation for status: 0x51 Dec  1 13:14:56 Chiba kernel: ata2: no sense translation for error 0x20 Dec  1 13:14:56 Chiba kernel: ata2: no sense translation for status: 0x51 Dec  1 13:14:56 Chiba kernel: ata2: no sense translation for error 0x20 Dec  1 13:14:56 Chiba kernel: ata2: no sense translation for status: 0x51 Dec  1 13:14:56 Chiba kernel: ata2: no sense translation for error 0x20 Dec  1 13:14:56 Chiba kernel: ata2: no sense translation for status: 0x51 Dec  1 13:14:56 Chiba kernel: ata2: no sense translation for error 0x20 Dec  1 13:14:56 Chiba kernel: ata2: no sense translation for status: 0x51 Dec  1 13:14:56 Chiba kernel: ata2: no sense translation for error 0x20 Dec  1 13:14:56 Chiba kernel: ata2: no sense translation for status: 0x51 Dec  1 13:14:56 Chiba kernel: sr: Current [descriptor]: sense key=0x3 Dec  1 13:14:56 Chiba kernel:     ASC=0x11 ASCQ=0x4
Dec  1 13:14:58 Chiba kernel: ata2: no sense translation for error 0x20 Dec  1 13:14:58 Chiba kernel: ata2: no sense translation for status: 0x51 Dec  1 13:14:58 Chiba kernel: ata2: no sense translation for error 0x20 Dec  1 13:14:58 Chiba kernel: ata2: no sense translation for status: 0x51 Dec  1 13:14:58 Chiba kernel: ata2: no sense translation for error 0x20 Dec  1 13:14:58 Chiba kernel: ata2: no sense translation for status: 0x51 Dec  1 13:14:58 Chiba kernel: ata2: no sense translation for error 0x20 Dec  1 13:14:58 Chiba kernel: ata2: no sense translation for status: 0x51

and kde hangs in one of the steps of ksplash before showing desktop ( I think, trying to discover media, such as cdrom, usb pen drive and so on).

Quoted 9 lines

Drive is detected as follows:

ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15 ata2:
dev 0 cfg 49:0b00 82:0210 83:1000 84:0000 85:0000 86:0000 87:0000 88:0407 ata2: dev 0 ATAPI, max UDMA/33 ata2: dev 0 configured for UDMA/33
scsi1 : ata_piix
Vendor: SONY Model: DVD+-RW DW-Q58A Rev: UDS1 Type: CD-ROM
ANSI SCSI revision: 05

ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15
ata2: dev 0 cfg 49:0f00 82:4218 83:5000 84:4000 85:4218 86:1000 87:4000 88:0407
ata2: dev 0 ATAPI, max UDMA/33
ata2(0): applying bridge limits
ata2: dev 0 configured for UDMA/33
scsi1 : ata_piix
  Vendor: TSSTcorp  Model: DVD+-RW TS-L532B  Rev: DE03
  Type:   CD-ROM                             ANSI SCSI revision: 05
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0

Thanks in advance!

PS: To Jeff Garzik: I try to sent you two mails about this bug but I think they were not correctly delivered... sigh!

Signature · 5 lines
Il reggiseno e' uno strumento democratico perche' separa la destra dalla
sinistra, solleva le masse e attira i popoli.

www.debianizzati.org | Founder Member
Mario "Ldonesty" Di Nitto --- [Linux Registered User #334335]