Skip to contentSkip to conversation

SATA ICH5/PIIX and Combined mode

Linux 2.4.32 Robert Hancock 1 participant 1 message Dec 22, 2005 2 messages not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#2 lore raw
Quoted 6 lines · Paul Rolland

Well, the other way around is to upgrade e1000 driver in the 2.4.21EL-smp, as the machine I'm using is quite new, and RHES3 kernel can't find the Ethernet device, so the machine has no network.
My first idea was to consider this as an opportunity to upgrade to the latest 2.4.x kernel, but reading you, this looks like a bad idea... 2.6.x would be better ?

First make sure you have the latest RHEL3 errata kernel installed. If that still doesn't work, you could install the latest e1000 driver module from Intel.

Later vanilla 2.4 kernels are not necessarily an "upgrade" from Red Hat kernels based on older 2.4 versions as you lose all the Red Hat patches like NPTL and the O(1) scheduler.

If you are going to go to a 2.6 kernel you might as well just go to a newer distribution.

Signature · 3 lines
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from [email protected]
Home Page: http://www.roberthancock.com/