Skip to contentSkip to conversation

machine check errors

DISCUSSION Robert Hancock 1 participant 1 message Jan 13, 2006 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 11 lines · don fisher

I have a Tyan S2892 board with a pair Opteron 288 dual core cpus and 16GB dram. I receive the errors shown in the attached file, mcelog. It appears that these occur when the free memory becomes small, there is a lot in the cache, and a lot of IO.

The Tyan S2892 has an Nvidia Crush K8-04, which I think they call the southbridge. My errors appear to be related to the north bridge. There is an AMD 8131 PCI-X controller that runs the PCI slots. There is a 3WARE 9500-12 located in one of the PCI-X slots.

I have run Memtest86+-1.65 for 24 hours without errors. I recently upgraded the BIOS to V2.00 without any remarkable changes.

I am running 2.6.15 within a current Fedora Core4 configuration.

I would appreciate any advice as to how to proceed. I have not noticed any adverse behavior from the mce's. But that could be masked is data transfered or ???.

Could there be any connection with the memory cache? Thanks in advance for your assistance.

I would say you likely do have some bad RAM, that seems to be what those MCEs are indicating. Depending on the configuration, Memtest86 may not find all the errors if they are being corrected by ECC..

Signature · 3 lines
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from [email protected]
Home Page: http://www.roberthancock.com/