PPC405GP and PCI parked state
Hi all,
I have questions on how to leave internal PCI controller of PPC405GP in a parked state.
Our custom board currently does not use the PCI and we want it to be in a parked state.
According to the data sheet, ppc405gp needs pull up resisters if the PCI controller on the processor is not parked in proper state.
Our custom board is based on IBM Walnut board and I undefined CONFIG_PCI. Would it leave it in a parked state?
What is the proper configuration to do this?
Also, would Linux override this setting if it is not properly configured as well?
We like to avoid putting on large number of pull up resister if possible.
Thank you.
===============================================================
Brian S. Park brian at corelis.com (562) 926-6727 x132
---------------------------------------------------------------
Everything we do helps our customers get to market FASTER with HIGHER quality and LOWER cost
===============================================================
Quoted 3 lines · In message <[email protected]> you wrote:
I have questions on how to leave internal PCI controller of PPC405GP in a parked state.
Please do NOT post the same questions to several mailing lists without any indication or cross-reference.
Wolfgang Denk
Signature · 5 lines
See us @ Embedded World, Nuremberg, Feb 17 - 19, Hall 12.0 Booth 440 Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de You Earth people glorified organized violence for forty centuries. But you imprison those who employ it privately. -- Spock, "Dagger of the Mind", stardate 2715.1