DVICO dual express incorrect readback of firmware message (2.6.28 kernel)

linux-dvb [email protected] 2 participants 2 messages Dec 31, 2008 Media (V4L/DVB)

Share & tools

[email protected]

author

2008-12-31 02:56 UTC #0 lore raw

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Devin Heitmueller

2008-12-31 02:58 UTC #1 lore raw

Quoted 220 lines · On Tue, Dec 30, 2008 at 9:55 PM, [email protected] <[email protected]>…

Upgrade to latest hg...
Issue is still occurring.
I also noticed some other messages in dmesg that I didn't see before that hopefully may help.
cheers
Allan
Here is the output..
xc2028 4-0061: -5 returned from send
xc2028 4-0061: Error -22 while loading base firmware
xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 4-0061: i2c output error: rc = -5 (should be 64) xc2028 4-0061: -5 returned from send
xc2028 4-0061: Error -22 while loading base firmware
zl10353: write to reg 5f failed (err = -5)!
zl10353: write to reg 71 failed (err = -5)!
xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
xc2028 3-0061: Incorrect readback of firmware version.
xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 4-0061: i2c output error: rc = -5 (should be 4)
xc2028 4-0061: -5 returned from send
xc2028 4-0061: Error -22 while loading base firmware
xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 4-0061: i2c output error: rc = -5 (should be 64) xc2028 4-0061: -5 returned from send
xc2028 4-0061: Error -22 while loading base firmware
zl10353: write to reg 5f failed (err = -5)!
zl10353: write to reg 71 failed (err = -5)!
xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
xc2028 3-0061: Incorrect readback of firmware version.
zl10353_read_register: readreg error (reg=6, ret==-5)
zl10353: write to reg 55 failed (err = -5)!
zl10353: write to reg ea failed (err = -5)!
zl10353: write to reg ea failed (err = -5)!
zl10353: write to reg 56 failed (err = -5)!
zl10353: write to reg 5e failed (err = -5)!
zl10353: write to reg 5c failed (err = -5)!
zl10353: write to reg 64 failed (err = -5)!
zl10353: write to reg cc failed (err = -5)!
zl10353: write to reg 65 failed (err = -5)!
zl10353: write to reg 66 failed (err = -5)!
zl10353: write to reg 6c failed (err = -5)!
zl10353: write to reg 6d failed (err = -5)!
zl10353: write to reg 6e failed (err = -5)!
zl10353: write to reg 6f failed (err = -5)!
xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 4-0061: i2c output error: rc = -5 (should be 64) xc2028 4-0061: -5 returned from send
xc2028 4-0061: Error -22 while loading base firmware
xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 4-0061: i2c output error: rc = -5 (should be 64) xc2028 4-0061: -5 returned from send
xc2028 4-0061: Error -22 while loading base firmware
zl10353: write to reg 5f failed (err = -5)!
zl10353: write to reg 71 failed (err = -5)!
zl10353_read_register: readreg error (reg=6, ret==-5)
zl10353: write to reg 55 failed (err = -5)!
zl10353: write to reg ea failed (err = -5)!
zl10353: write to reg ea failed (err = -5)!
xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 4-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
xc2028 4-0061: Incorrect readback of firmware version.
xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
xc2028 3-0061: Incorrect readback of firmware version.
xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 4-0061: i2c output error: rc = -5 (should be 4)
xc2028 4-0061: -5 returned from send
xc2028 4-0061: Error -22 while loading base firmware
zl10353: write to reg 5f failed (err = -5)!
zl10353: write to reg 71 failed (err = -5)!
zl10353_read_register: readreg error (reg=6, ret==-5)
zl10353: write to reg 55 failed (err = -5)!
xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
zl10353: write to reg ea failed (err = -5)!
zl10353: write to reg ea failed (err = -5)!
zl10353: write to reg 56 failed (err = -5)!
zl10353: write to reg 5e failed (err = -5)!
zl10353: write to reg 5c failed (err = -5)!
zl10353: write to reg 64 failed (err = -5)!
zl10353: write to reg cc failed (err = -5)!
xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
zl10353: write to reg 65 failed (err = -5)!
zl10353: write to reg 66 failed (err = -5)!
zl10353: write to reg 6c failed (err = -5)!
zl10353: write to reg 6d failed (err = -5)!
zl10353: write to reg 6e failed (err = -5)!
zl10353: write to reg 6f failed (err = -5)!
xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 4-0061: i2c output error: rc = -5 (should be 64) xc2028 4-0061: -5 returned from send
xc2028 4-0061: Error -22 while loading base firmware
xc2028 3-0061: Incorrect readback of firmware version.
xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 4-0061: i2c output error: rc = -5 (should be 64) xc2028 4-0061: -5 returned from send
xc2028 4-0061: Error -22 while loading base firmware
zl10353: write to reg 5f failed (err = -5)!
zl10353: write to reg 71 failed (err = -5)!
zl10353_read_register: readreg error (reg=6, ret==-5)
zl10353: write to reg 55 failed (err = -5)!
zl10353: write to reg ea failed (err = -5)!
zl10353: write to reg ea failed (err = -5)!
zl10353: write to reg 56 failed (err = -5)!
zl10353: write to reg 5e failed (err = -5)!
zl10353: write to reg 5c failed (err = -5)!
zl10353: write to reg 64 failed (err = -5)!
zl10353: write to reg cc failed (err = -5)!
zl10353: write to reg 65 failed (err = -5)!
zl10353: write to reg 66 failed (err = -5)!
zl10353: write to reg 6c failed (err = -5)!
zl10353: write to reg 6d failed (err = -5)!
zl10353: write to reg 6e failed (err = -5)!
zl10353: write to reg 6f failed (err = -5)!
xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 4-0061: i2c output error: rc = -5 (should be 64) xc2028 4-0061: -5 returned from send
xc2028 4-0061: Error -22 while loading base firmware
xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 4-0061: i2c output error: rc = -5 (should be 64) xc2028 4-0061: -5 returned from send
xc2028 4-0061: Error -22 while loading base firmware
xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
xc2028 3-0061: Incorrect readback of firmware version.
xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 4-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
xc2028 4-0061: Incorrect readback of firmware version.
xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
xc2028 3-0061: Incorrect readback of firmware version.
xc2028 4-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
xc2028 4-0061: Incorrect readback of firmware version.
xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 4-0061: i2c output error: rc = -5 (should be 4)
xc2028 4-0061: -5 returned from send
xc2028 4-0061: Error -22 while loading base firmware
xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 4-0061: i2c output error: rc = -5 (should be 64) xc2028 4-0061: -5 returned from send
xc2028 4-0061: Error -22 while loading base firmware
zl10353: write to reg 5f failed (err = -5)!
zl10353: write to reg 71 failed (err = -5)!
xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
xc2028 3-0061: Incorrect readback of firmware version.
xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 4-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
xc2028 4-0061: Incorrect readback of firmware version.
xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
xc2028 3-0061: Incorrect readback of firmware version.
xc2028 4-0061: Loading firmware for type=D2633 DTV7 (90), id

Quoted 8 lines

0000000000000000.
xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
xc2028 4-0061: Incorrect readback of firmware version.
xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.

Do me a favor and please stop top posting. It's a violation of list policy.

Were those there before you upgraded to the latest hg?

I suspect that perhaps the components are powered down, which is why the i2c calls are failing. Very strange.

Signature · 8 lines

Devin J. Heitmueller
http://www.devinheitmueller.com
AIM: devinheitmueller

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb