Skip to contentSkip to conversation

U-Boot on 440EP Bamboo board, anybody succeed?

U-Boot-Users Andriy Korud 3 participants 4 messages Apr 14, 2006

lore
Share & tools
lore
#0 lore raw
Quoted 3 lines

You have to set the MAC addresse(s) and reset the board. After this both enet devices will be available.

Thanks, it helps.

Quoted 11 lines
Quoted 1 line

In PIBS works. 2. When trying to boot uImage (loaded via

USB, as eth

Quoted 1 line

doesn't work), it just hang after "Uncompressing Kernel

Image ... OK".

Quoted 2 lines

The same bzImage runs in PIBS. U-Boot 1.1.4, Linux 2.6.16, compiled with gcc 3.4.5.

Please give the DENX linux images a try:

ftp://ftp.denx.de/pub/linux/images/amcc/bamboo/

U-Boot 1.1.4 (Dec 5 2005 - 16:21:22) (binary image downloaded from above URL)
No success, hangs afret "Uncompressing Kernel Image ... OK"

Regards,
Andriy Korud

#1 lore raw

Hi Andriy,

Quoted 4 lines · Andriy Korud
Quoted 2 lines

You have to set the MAC addresse(s) and reset the board. After this both enet devices will be available.

Thanks, it helps.

OK.

Quoted 10 lines
Quoted 6 lines
Quoted 2 lines

The same bzImage runs in PIBS. U-Boot 1.1.4, Linux 2.6.16, compiled with gcc 3.4.5.

Please give the DENX linux images a try:

ftp://ftp.denx.de/pub/linux/images/amcc/bamboo/

U-Boot 1.1.4 (Dec 5 2005 - 16:21:22) (binary image downloaded from above URL)
No success, hangs afret "Uncompressing Kernel Image ... OK"

Hmmm. Should work. What is the content of the env variable bootargs upon booting the kernel. Did you pass all needed info to the kernel (ttySx, baudrate...)?

Best regards,
Stefan

#2 lore raw
Quoted 3 lines

Hmmm. Should work. What is the content of the env variable bootargs upon booting the kernel. Did you pass all needed info to the kernel (ttySx, baudrate...)?

Thanks for the tips. bootargs was no set at all (I was using plain bootm).

regards,
Andriy Korud

#3 lore raw
In reply to Andriy Korud
Quoted 4 lines · In message <[email protected]> you…

U-Boot 1.1.4 (Dec 5 2005 - 16:21:22) (binary image downloaded from above URL)
No success, hangs afret "Uncompressing Kernel Image ... OK"

But this is most probably not an U-Boot probl;em. Where did you get your kernel image from? [Hint: there is a working image just in the neigbour directory on the same server; just s/u-boot/linux/ ].

Best regards,

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A Puritan is someone who is deathly afraid that  someone,  somewhere,
is having fun.